Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Observe safety precautions
   • Correct safety procedures are observed, and protective clothing and safety glasses are worn.
2. Determine job requirements
   • Drawings are interpreted, and sequence of operations is determined.
   • Correct electrode is selected to ensure finished component conforms to drawing specifications.
   • Electrode surface area is calculated and process parameters are set to give safe, accurate and efficient operation.
3. Set up job
   • Job is set up relative to electrode to ensure required position is obtained.
4. Perform electro-discharge (EDM)
   • Electro-discharge machine is operated to produce components to drawing specifications.
5. Check components for conformance to specification
   • Components are checked for conformance to specification using appropriate techniques, tools and equipment.

Required Skills

Required skills

Look for evidence that confirms skills in following relevant safety procedures obtaining and interpreting relevant drawings job instructions and specifications selecting correct electrode to ensure that the finished product conforms to specification determining the coordinates of the work pieces relative to the machine datum calculating machining parameters necessary to achieve the safe accurate and efficient machining of the work piece calculating the surface area of the electrode positioning work piece and electrode to enable the safe accurate and efficient machining of the required features producing components to specification checking machined components for conformance with specifications

Required knowledge

Look for evidence that confirms knowledge of safety hazards associated with the use of electrodischarge machines the job requirements the sequence of operations to achieve the job requirements the electrode type and geometry required to achieve the specified outcome the effects of material to be machined on the electrode material and geometry the procedures for producing electrodes for the electrodischarge machining process the coordinates of the features to be machined the coordinates of the electrode relative to the machine datum the procedures for operating the electrodischarge machine to produce components the tools techniques and equipment appropriate to the checking of machined components the procedures for checking machined components for conformance to specification the reasons for selecting the tools techniques and equipment to be used

Evidence Required

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria required skills and knowledge range statement and the Assessment Guidelines for the Training Package
Overview of assessment	A person who demonstrates competency in this unit must be able to perform electrodischarge EDM machining operations Competency in this unit cannot be claimed until all prerequisites have been satisfied
Critical aspects for assessment and evidence required to demonstrate competency in this unit	Assessors must be satisfied that the candidate can competently and consistently perform all elements of the unit as specified by the criteria including required knowledge and be capable of applying the competency in new and different situations and contexts
Context of and specific resources for assessment	This unit may be assessed on the job off the job or a combination of both on and off the job Where assessment occurs off the job that is the candidate is not in productive work then an appropriate simulation must be used where the range of conditions reflects realistic workplace situations The competencies covered by this unit would be demonstrated by an individual working alone or as part of a team The assessment environment should not disadvantage the candidate This unit could be assessed in conjunction with any other units addressing the safety quality communication materials handling recording and reporting associated with electrodischarge EDM machining operations or other units requiring the exercise of the skills and knowledge covered by this unit
Method of assessment	Assessors should gather a range of evidence that is valid sufficient current and authentic Evidence can be gathered through a variety of ways including direct observation supervisors reports project work samples and questioning Questioning techniques should not require language literacy and numeracy skills beyond those required in this unit of competency The candidate must have access to all tools equipment materials and documentation required The candidate must be permitted to refer to any relevant workplace procedures product and manufacturing specifications codes standards manuals and reference materials
Guidance information for assessment

---

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Electrode	Includes all types and grades of graphite electrodes
Job set up	Includes correct use of work holding devices and selection of EDM fluids, spark generation, cycle time, power settings, and dielectric fluids for the requirement of a particular job

---