Elements and Performance Criteria
- Trial program
- Operate machine to produce first-off samples, observing all safety procedures
- Check first-off samples for compliance with specifications
- Undertake program editing to change speeds, feed and operational sequence requirements to ensure job conforms to specification
- Replace tools, adjust tool offsets or take other corrective action using SOPs, where appropriate
- Instruct operator, if necessary, ensuring that all safety procedures and devices are in place
- Determine job requirements
- Comply with work health and safety (WHS) requirements at all times
- Use appropriate personal protective equipment (PPE) in accordance with SOPs
- Identify job requirements from specifications, drawings, job sheets or work instructions
- Set work holding fixtures/devices/tools
- Prepare machine to accept work holding devices
- Set work holding fixtures/devices/tools to zero or a datum using appropriate setting devices
- Measure tooling offsets and record in machine controller
- Check first-off samples for compliance with specifications
- Undertake program editing to change speeds, feed and operational sequence requirements to ensure job conforms to specification
- Replace tools, adjust tool offsets or take other corrective action using SOPs, where appropriate
- Instruct operator, if necessary, ensuring that all safety procedures and devices are in place