Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Assess planned work for conflicts.
   • Identify all planned work for a time period
   • Determine the scope and HSE impacts of each planned job
   • Confirm hazard analysis and controls for each planned job
   • Compare hazard profiles for each planned job
   • Identify conflicts between planned jobs
   • Negotiate a solution between conflicts
   • Communicate results of negotiations to relevant stakeholders.
2. Issue required permits.
   • List those jobs which will be allowed to proceed in the time period
   • Confirm hazard controls required for these jobs
   • Identify jobs which have impacts across plant areas
   • Ensure controls and communications are adequate
   • Issue/cause to be issued required permits
   • Report as required by procedures.
3. Audit live permits.
   • Audit plant preparations
   • Audit permit issuing process
   • Check appropriate controls have been specified
   • Audit handover/sign on process
   • Audit work in progress for conformance to permit conditions
   • Audit work completion and hand back/closing process
   • Audit deisolation and return to work preparations
   • Take immediate and appropriate action on any problems found
   • Report on audit as required by procedures.
4. Audit past permits.
   • Obtain relevant paper work
   • Check for conformance to procedures
   • Check for appropriateness of specified hazard controls
   • Identify any non-conformance
   • Identify systemic non-conformances
   • Take any immediate action which is appropriate
   • Report on audit as required by procedures.
5. Analyse audit findings.
   • Identify improvements to the permit system
   • Identify improvements to the implementation of the permit system
   • Suggest improvements to the permit system as appropriate
   • Suggests improvements to hazard analysis processes
   • Suggest improvements to the plant preparation/return to operations processes
   • Suggest improvements to hazard controls
   • Suggest training required as appropriate

Required Skills

This describes the essential skills and knowledge and their level required for this unit

Required skills

This competency includes the following skills analysis decision making communication priortisation leadership negotiation problem solving

Required knowledge

Competence in this unit includes the following knowledge the operations of the plant and each major unit in it hazards associated with all plant materials processes and process conditions hazard analysis and control HSE legislative requirements related to plant plant preparation procedures auditing principles

Evidence Required

The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria Required Skills and Knowledge the Range Statement and the Assessment Guidelines for the Training Package
Overview of assessment	Assessment of this unit should demonstrate competence on actual plant and equipment in a work environment The unit will be assessed in as holistic a manner as is practical and may be integrated with the assessment of other relevant units of competency Assessment will occur over a range of situations which will include disruptions to normal smooth operation Simulation may be required to allow for assessment of parts of this unit Simulation should be based on the actual plant and will include walk throughs of the relevant competency components Simulations may also include the use of case studiesscenarios and role plays This unit of competency requires a significant body of knowledge which will be assessed through questioning and the use of what if scenarios both on the plant during demonstration of normal operations and walk throughs of abnormal operations and off the plant
Critical aspects for assessment and evidence required to demonstrate competency in this unit	Competence must be demonstrated in the ability to specify the requirements and then select the best solution to meet the necessary and desirable requirements
Context of and specific resources for assessment	Assessment will require access to an operating plant over an extended period of time or a suitable method of gathering evidence of operating ability over a range of situations A bank of scenarioscase studieswhat ifs will be required as will a bank of questions which will be used to probe the reasoning behind the observable actions
Method of assessment	In all plants it may be appropriate to assess this unit concurrently with other relevant units
Guidance information for assessment	Assessment processes and techniques must be culturally appropriate and appropriate to the oracy language and literacy capacity of the assessee and the work being performed

---

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the Performance Criteria, is detailed below. Add any essential operating conditions that may be present with training and assessment depending on the work situation, needs if the candidate, accessibility of the item, and local industry and regional contexts.
Codes of practice/ standards	Where reference is made to industry codes of practice, and/or Australian/international standards, the latest version must be used.
Context	This competency covers the issue of any and all work permits. Permits are called clearances by some organisations. The types of permit include: cold work excavation vehicle entry minor repairs working at heights hot work confined space electrical increased hazard other relevant permits. Requirements identified on the permit may include testing of atmospheric conditions, ventilation and control measures such as isolation, barriers, tag out/lockout signs, communications, incident response. A 'competent person' is a person who has, through a combination of training, education or experience, acquired knowledge and skills enabling that person to correctly perform a specified task. Safety structures and controls may include automatic plant shut down buttons, cords/lanyards, alarms, barriers, guards, earth leakage devices, tag out/lock out procedures, warning lights.
Live permits	Live permits applies to work currently being done
Past permits	Past permits applies to any permit which has been handed back/closed.
Audit permits	Auditing of permits includes all of: selecting an individual permit and following it through spot checking any aspect of permits intensively checking one aspect of the process with all permits on issue
Health, safety and environment (HSE)	All operations to which this unit applies are subject to stringent health, safety and environment requirements, which may be imposed through State or Federal legislation, and these must not be compromised at any time. Where there is an apparent conflict between performance criteria and HSE requirements, the HSE requirements take precedence.

---