Google Links
Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge
Elements and Performance Criteria
- Prepare for the work
- Identify and follow work health and safety, legislative and organisational requirements
- Read work documentation and identify job requirements
- Identify surface suitability for fine sanding based on contamination and moisture content inspection, and complete pre-sanding requirements
- Assess and confirm parquetry flooring condition and the extent of coarse, finish and fine sanding and filling required to meet job specifications
- Select and check tools, equipment and materials for suitability, serviceability and safety prior to use
- Isolate and/or encapsulate the job site to contain dust fallout from sanding operation
- Plan sequence of work to ensure efficiency and quality of application
- Set up, check and adjust sanding equipment and safety features in accordance with manufacturer instructions
- Select and change equipment to meet requirements of the job
- Select, attach and routinely check and change sanding belts or papers to ensure quality finish
- Conduct trial runs to check machine operations and quality of finished work
- Complete sanding systematically and effectively with the grain, against the grain and across the grain within the minimum required timeframe
- Complete required routine lubrication and adjustments to the equipment
- Clean and check final finish against quality and job requirements, and rectify deficiencies
- Check ventilation before chemical fumes are released, and confirm all WHS and environmental protection requirements are met
- Prepare filling material in accordance with manufacturer specifications
- Make trial applications of fillers to check equipment operation, materials consistency, viscosity and specified colour
- Identify faults and/or inconsistencies in colour and follow workplace procedures for rectification and adjustments
- Apply filling material in accordance with manufacturer recommendations and observe drying times between coats
- Sand between coats as required in accordance with manufacturer recommendations
- Complete housekeeping
- Store and recycle unused materials in accordance with workplace procedures
- Check, clean and store tools and equipment in accordance with workplace procedures
- Clean work area and dispose of rubbish safely
- Accurately complete required workplace documentation
- Identify and follow work health and safety, legislative and organisational requirements
- Read work documentation and identify job requirements
- Identify surface suitability for fine sanding based on contamination and moisture content inspection, and complete pre-sanding requirements
- Assess and confirm parquetry flooring condition and the extent of coarse, finish and fine sanding and filling required to meet job specifications
- Select and check tools, equipment and materials for suitability, serviceability and safety prior to use
- Isolate and/or encapsulate the job site to contain dust fallout from sanding operation
- Plan sequence of work to ensure efficiency and quality of application
- Set up, check and adjust sanding equipment and safety features in accordance with manufacturer instructions
- Select and change equipment to meet requirements of the job
- Select, attach and routinely check and change sanding belts or papers to ensure quality finish
- Conduct trial runs to check machine operations and quality of finished work
- Complete sanding systematically and effectively with the grain, against the grain and across the grain within the minimum required timeframe
- Complete required routine lubrication and adjustments to the equipment
- Clean and check final finish against quality and job requirements, and rectify deficiencies
- Check ventilation before chemical fumes are released, and confirm all WHS and environmental protection requirements are met
- Prepare filling material in accordance with manufacturer specifications
- Make trial applications of fillers to check equipment operation, materials consistency, viscosity and specified colour
- Identify faults and/or inconsistencies in colour and follow workplace procedures for rectification and adjustments
- Apply filling material in accordance with manufacturer recommendations and observe drying times between coats
- Sand between coats as required in accordance with manufacturer recommendations