Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Prepare for work
   • Work instructions are used to determine job requirements, including design, tolerances, process, materials, finish and quantity
   • Construction and assembly sequence are planned
   • Procedures are determined for checking quality at each stage of the process
   • Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work
   • Suitable work area is selected for the task
   • Preparatory drawings and set-outs for tasks are completed
   • Cutting list for components is developed
   • Materials are selected following work instructions
   • Tools and equipment suitable for construction are identified and checked for safe and effective operation
2. Complete construction
   • Materials are set out and prepared according to work instructions and components are marked according to industry practices
   • Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications
   • Materials are bent and formed in accordance with the plan
   • Components are manufactured and checked against set-out for tolerances, fit and accuracy
   • Components are assembled and checked against set-out for accuracy, fit, twist and distortion
   • Doors, drawers and shelves are assembled and fitted
   • Product is prepared for final finish, including the removal of bruises, scratches, dents and marks
   • Product is checked against plans at identified checkpoints
3. Finalise operation and maintain equipment
   • Work area is cleaned, hand and/or power tools and equipment are cleaned, maintained and stored in accordance with workplace procedures
   • Machinery is cleaned and left in a safe mode
   • Faulty and/or defective equipment is tagged and reported in accordance with workplace practices
   • Unused hardware is collected and stored for re-use or disposal following workplace procedures
   • Waste and scrap materials are dealt with following workplace procedures

Range Statement

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment.
Furniture includes:	angled cabinets and curved cabinets with rails counters and display units
Unit context includes:	WHS requirements, including legislation, building codes, material safety management systems, hazardous substances and dangerous goods code, and local safe operating procedures work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements work involves reading and interpreting plans, developing set-outs, using hand and/or power tools, equipment and operating woodworking machinery competency may be demonstrated in workplaces involved in the manufacture of domestic furniture, commercial furniture, kitchen and bathroom cabinets and/or furniture components
Tools and equipment include:	measuring tapes or rulers hammers mallets squares bevels chisels planes hand saws power saws power drills/screwdrivers pneumatic tools, compressor and spray equipment clamps screwdrivers pincers
Machines include:	band saws cross-cut saws mitre saws panel saws surface planers panel planers belt sanders horizontal borers vertical drill presses dovetailers pedestal grinders veneer guillotines and presses
Materials include:	manufactured board adhesives screws nails dowels knock-down fittings glass decorative finishes abrasive paper and finishing materials
Personal protective equipment includes:	that prescribed under legislation, regulations and enterprise policies and practices
Information and procedures include:	workplace procedures relating to the use of tools and equipment work instructions, including job sheets, cutting lists, plans, drawings and designs workplace procedures relating to reporting and communication manufacturer specifications and operational procedures

---

Performance Evidence

Interpret work order and locate and apply relevant information

Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment

Follow work instructions, operating procedures and inspection processes to:

minimise the risk of injury to self or others

prevent damage to goods, equipment or products

maintain required production output and product quality

Produce a minimum of two (2) significant manufactured board products which must include one (1) curved cabinet with rails and one (1) cabinet with glass shelves, panels and doors

Conduct operator maintenance on machines and related tools and equipment

Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements

Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures

Minimise wastage of resources, including materials, time and money

Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity

---

Knowledge Evidence

Types, characteristics, uses and limitations of manufactured board

Interpretation of plan representation of furniture design

Preparation of drawings and set-outs

Identification of hand and/or power tools, materials, equipment, processes and procedures

Work flow in relation to furniture production

---