Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Prepare for work
   • Work instructions are used to determine job requirements, including design, tolerances, process, materials, finish and quantity
   • Fabrication sequence is planned
   • Procedures are determined for checking quality at each stage of the process
   • Work health and safety (WHS) requirements, including personal protection needs, are observed throughout the work
   • Suitable work area is selected for the task
   • Preparatory drawings and set-outs for tasks are completed
   • Cutting list for components is developed
   • Materials are selected following work instructions
   • Tools and equipment suitable for fabrication are identified and checked for safe and effective operation
2. Complete fabrication
   • Materials are set out and prepared according to work instructions and components are marked according to industry practices
   • Tools, machines and equipment are used in accordance with safety requirements and manufacturer specifications
   • Components are fabricated and checked against set-outs for accuracy tolerances, fit and distortion
   • Doors, drawers, shelves or decorative treatments are fitted as required
   • Product is prepared for final finish, including the removal of bruises, scratches, dents and marks
   • Product is checked against plans at identified checkpoints
3. Finalise operation and maintain equipment
   • Work area is cleaned, hand and/or power tools and equipment are cleaned, maintained and stored in accordance with workplace procedures
   • Machinery is cleaned and left in a safe mode
   • Faulty and/or defective equipment is tagged and reported in accordance with workplace practices
   • Unused hardware is collected and stored for re-use or disposal following workplace procedures
   • Waste and scrap materials are dealt with following workplace procedures

Range Statement

Specifies different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included. Range is restricted to essential operating conditions and any other variables essential to the work environment.
Synthetic solid surface products include:	acrylic or polyester sheet-based materials
Synthetic solid surface products include:	benchtops edges sinks bowls other containers and waterproof wall treatments
Unit context includes:	WHS requirements, including legislation, building codes, material safety management systems, hazardous substances and dangerous goods code, and local safe operating procedures work is carried out in accordance with legislative obligations, environmental legislation, relevant health regulations, manual handling procedures and organisation insurance requirements work involves reading and interpreting plans, developing set-outs, using hand and/or power tools, equipment and operating machinery
Tools and equipment include:	measuring tapes or rulers hammers mallets squares bevels chisels planes hand saws power saws power drills/screwdrivers air compressor and hoses clamps screwdrivers pincers
Machines include:	panel saws routers edge moulders point to point heat applicators sanding and buffing machines
Materials include:	synthetic solid surface materials timber manufactured board glues screws nails dowels knockdown fittings
Personal protective equipment includes:	that prescribed under legislation, regulations and enterprise policies and practices
Information and procedures include:	workplace procedures relating to the use of tools and equipment work instructions, including job sheets, cutting lists, plans, drawings and designs workplace procedures relating to reporting and communication manufacturer specifications and operational procedures

---

Performance Evidence

Interpret work order and locate and apply relevant information

Apply safe handling requirements for equipment, products and materials, including use of personal protective equipment

Follow work instructions, operating procedures and inspection processes to:

minimise the risk of injury to self or others

prevent damage to goods, equipment or products

maintain required production output and product quality

Fabricate a minimum of three (3) synthetic solid surface material products, including at least one (1) full benchtop

Use mathematical ideas and techniques to correctly complete measurements, calculate area and estimate material requirements

Communicate ideas and information to enable confirmation of work requirements and specifications and the reporting of work outcomes and problems, interpret basic plans and follow safety procedures

Minimise wastage of resources, including materials, time and money

Work with others and in a team by recognising dependencies and using cooperative approaches to optimise work flow and productivity

---

Knowledge Evidence

Types, characteristics, uses and limitations of synthetic solid surface materials

Interpretation of plan representation of furniture design

Preparation of drawings and set-outs

Identification of hand and/or power tools, materials, machines, equipment, processes and procedures

Work flow in relation to furniture production

---