Elements and Performance Criteria
- Identify and plan work requirements
- Work requirements in the form of type, pattern/plan and quantity of mirrors or glass splashbacks to be prepared and installed are identified from work instructions
- Work health and safety (WHS) requirements for fabrication and installation of mirrors and glass splashbacks, including personal protective equipment, are observed throughout the work
- Work sequence is planned in a logical order to suit the job and workplace procedures
- Quantities of materials required are calculated from plans or work instructions or by measuring the installation site
- Fixing and joining devices or materials are selected in accordance with specifications or type of materials to be joined and the surface on which the mirror or splashback is to be installed
- Tools and equipment suitable to the work method are identified
- Prepare for work
- Compatible materials, fixings, fasteners, tools and equipment needed to complete the work are selected and checked prior to use to ensure they are appropriate for the work, serviceable and in a safe condition
- Components of the mirror or splashback are checked against specifications or job order for size, quantity, finish and profile
- Fabricate and install mirrors and glass splashbacks
- Frame, if required, is fabricated in accordance with workplace procedures or industry practice
- Mirror or splashback glass is cut to size in accordance with workplace procedures and industry practice
- Mirror or splashback is edge worked, if required, in accordance with workplace procedures or industry practice
- Holes, where required, are drilled in frame, mirror or splashback in accordance with the plan, workplace procedures and industry practice
- Glass splashbacks are finished according to customer specifications
- Mirror or splashback is installed using appropriate fixing method in accordance with workplace procedures and industry practice
- Complete work
- Installed mirror or splashback is inspected for quality of work and repaired, re-fabricated or reinstalled, as required, in accordance with workplace procedures
- Waste, unused and scrap material are removed for disposal or recycling, as required
- Work area is cleaned and rubbish disposed of, as appropriate
- Tools, equipment and unused materials are removed and stored appropriately according to workplace requirements
- Workplace documentation is completed in accordance with workplace procedures