Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Determine job requirements
   • Follow standard operating procedures (SOPs)
   • Comply with work health and safety (WHS) requirements at all times
   • Use appropriate personal protective equipment (PPE) in accordance with SOPs
   • Identify job requirements from specifications, drawings, job sheets or work instructions
2. Prepare to press work
   • Set up work area according to workplace procedures
   • Clean and check pressing equipment and perform routine minor maintenance
   • Make preparations for pressing
   • Collect or receive work, check quality and determine any follow-up action.
   • Lay out work in correct proximity and sequence
   • Identify faults, spots and marks and take appropriate action
   • Select and use appropriate attachments
   • Sequence pressing as required
3. Despatch pressed work
   • Inspect pressed work and compare against workplace pressing standards
   • Report faulty work and take follow up action, according to workplace procedures
   • Identify preventative action to avoid any recurrence of faulty work
   • Pass pressed work to next operation

Range Statement

This field allows for different work environments and conditions that may affect performance. Essential operating conditions that may be present (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) are included.
Workplace procedures include one or more of the following:	requirements prescribed by legislation, awards, agreements and conditions of employment SOPs work instructions personal protective equipment (PPE) oral, written and visual communication quality practices, including responsibility for maintenance of own work quality and contribution to quality improvement of team or section output housekeeping tasks related to environmental protection, waste disposal, pollution control and recycling WHS practices
Australian Standards include:	the relevant industry or Australian Standards that are current at the time this unit is being undertaken
Fabric range includes one or more of the following:	woven cottons denim cotton drill calico polyesters interfacings trims and attachments
Preparations for pressing includes the following:	checking that water reservoirs are filled to the designated levels in relevant equipment checking condition of electrical cords cleaning contact surfaces of steaming and pressing equipment filling steam equipment with distilled water setting thermostats at appropriate temperature checking equipment operational procedures
Pressing equipment includes two or more of the following:	irons presses industrial steam irons suction boards sleeve board sleeve roll
Routine minor maintenance includes one or more of the following:	washing out or replacing cover and padding shaking out rubber mat brushing and air blowing wire mesh applying sole-cleaning compounds to hand irons
Report faulty work includes one or more of the following:	written records shown by the attachment of a ticket oral or written reports

---

Performance Evidence

Evidence required to demonstrate competence in this unit must be relevant to and satisfy the requirements of the elements and performance criteria, and include:

reading and following work instructions, standard operating procedures (SOPs), safe work practices

applying relevant standards

checking work against work specification or pressing instructions

preparing pressing equipment and work before commencing pressing operations

using at least two (2) types of pressing equipment and applying pressing techniques for garment components on at least two (2) occasions

inspecting pressed work and comparing against workplace pressing standards

reporting faulty work and taking follow up action to avoid any recurrence of faulty work, according to workplace procedures

forwarding pressed work to next operation according to workplace requirements.

---

Knowledge Evidence

Evidence must be provided that demonstrates knowledge of:

safe work practices and procedures and use of personal protective equipment (PPE)

relevant Australian Standards

pressing requirements and characteristics of typical fabrics and other materials used in garment assembly

pressing equipment, such as:

irons

presses

industrial steam irons

suction boards

sleeve board

sleeve roll

quality standards and practices

workplace practices

recording and reporting practices.

---