Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

  1. Prepare for job
  2. Expose injury
  3. Prepare injury
  4. Complete repair preparation

Required Skills

Required skills

Required skills include

using skiving rotary cutting and buffing tools

taking measurements

using required inspection equipment

communicating effectively

working safely in accordance with operational requirements and safe systems of work

reading and interpreting typical product specifications job sheets and material labels as provided to operators

writing to the level of completing workplace forms and production reports

Required knowledge

Required knowledge includes

organisational procedures

heavy offtheroad HOTR tyre construction

methods of identifying injury position lugposition identification

tyre injury repair preparation methods

hazards and hazard controls associated with HOTR tyre repair preparation

reporting procedures

Evidence Required

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria required skills and knowledge range statement and the Assessment Guidelines for the Training Package

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Critical aspects for assessment and evidence are

tyre injury is identified and appropriate action for preparationinspection determined

consistent application of preparation inspection and testing standards

safety procedures are always followed

Context of and specific resources for assessment

Assessment will occur on an HOTR tyre repair facility Resources required include suitable access to an operating plant or equipment that allows for appropriate and realistic simulation A bank of case studiesscenarios and questions will also be required to the extent that they form part of the assessment method Questioning may take place either in the workplace or in an adjacent quiet facility such as an office or lunchroom No other special resources are required

Method of assessment

Competence in this unit may be assessed

by observation over a range of tyre preparationinspection procedures undertaken in the workplace

in a situation allowing for the generation of evidence of the ability to respond to problems

by using a suitable simulation andor a range of case studiesscenarios

through a combination of these techniques

In all cases it is expected that appropriate practicalsimulation assessment will be combined with targeted questioning to assess the required knowledge and theoretical assessment will be combined with appropriate practicalsimulation or similar assessment

Guidance information for assessment

Assessment processes and techniques must be appropriate to the language competency and safety requirements of the site and consistent with workplace systems or procedures


Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.

Tyre securing methods

Tyre securing methods may include, but are not limited to:

mounts and stands

chocks

wall or floor mounted frames, manually, electrically or hydraulically operated

Required tools

Required tools may include, but are not limited to:

rotary gouging and cutting equipment

knives and other blade cutting tools

surface preparation tools, such as contour and doughnut wheels

rotor saw

pin wheel

rotary and hand wire brushes

buffing and wire wheels

rotary stones

rotary rasps and other finishing tools

Foreign material

Foreign material that may contaminate the injury area or cause a health risk must be removed (e.g. spray paint used to mark tyres). This will include removing any rocks or other foreign material

Injuries to tyres

Injuries to tyres may include, but are not limited to:

cuts, abrasion, splits, cracks and crazing

separations within the structure

deformities both surface and internal

penetrations into and through the casing/carcass

Location of repairs

Repairs may be undertaken to the:

tread or crown, including steel components

shoulder

sidewall

bead area

liner

body cords

Injuries

Injuries may include, but are not limited to:

injuries which do not need repair and should be returned to the customer to be used as is

injuries which should be repaired

injuries which are beyond repair and so the tyre should be scrapped

Hidden injuries

Hidden injuries may include, but are not limited to:

cuts

oxidation

separations

Standards

Standards may include, but are not limited to:

AS 4457.2-2008 Earth-moving machinery - Off-the-road wheels, rims and tyres - Maintenance and repair – Tyres

Rubber Manufacturer’s Association of America (RMA)

Supplier standards, such as technical data sheets and manuals

internal organisational standards

Procedures

Procedures may be written, verbal, computer-based or in some other form. They may include, but are not limited to:

all work instructions

standard operating procedures

formulas/recipes

batch sheets

temporary instructions

any similar instructions provided for the smooth running of the plant

good operating practice as may be defined by industry codes of practice

Procedures would be expected to comply with any relevant government regulations.

Paperwork

Paperwork may be paper or electronic-based

Appropriate action

Appropriate action includes, but is not limited to:

determining problems needing action

accessing and applying relevant technical and plant data

applying appropriate problem solving techniques to determine possible fault causes

rectifying problem using appropriate solution within area of responsibility

following through items initiated until final resolution has occurred

reporting problems outside area of responsibility/ability to designated person

Health, safety and environment (HSE)

All operations to which this unit applies are subject to stringent HSE requirements, which may be imposed through state or federal legislation, and these must not be compromised at any time. Where there is an apparent conflict between Performance Criteria and HSE requirements, the HSE requirements take precedence.