Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

  1. Prepare for job
  2. Set up pressure curing system to procedures
  3. Cure repair to procedures
  4. Complete repair

Required Skills

Required skills

Required skills include

using pressure curing systems according to the machine manufacturers recommendations

reading instrumentation

communicating effectively

working safely in accordance with operational requirements and safe systems of work

reading and interpreting typical product specifications job sheets and material labels as provided to operators

writing to the level of completing workplace forms and production reports

Required knowledge

Required knowledge includes

organisational procedures

heavy offtheroad HOTR tyre construction bias and radial

methods of identifying lugposition identification

tyre repair curing methods

hazards and hazard controls associated with HOTR tyre repair curing

repair material and supplier repair recommendations

electrical equipment operation and safety

Evidence Required

The evidence guide provides advice on assessment and must be read in conjunction with the performance criteria required skills and knowledge range statement and the Assessment Guidelines for the Training Package

Overview of assessment

Critical aspects for assessment and evidence required to demonstrate competency in this unit

Critical aspects for assessment and evidence are

tyre injuryrepair is identified and appropriate action for curing determined

consistent application of curing standards

safety procedures are always followed

Context of and specific resources for assessment

Assessment will occur on an HOTR tyre repair facility Resources required include suitable access to an operating plant or equipment that allows for appropriate and realistic simulation A bank of case studiesscenarios and questions will also be required to the extent that they form part of the assessment method Questioning may take place either in the workplace or in an adjacent quiet facility such as an office or lunchroom No other special resources are required

Method of assessment

Competence in this unit may be assessed

by observation over a range of tyre curing procedures undertaken in the workplace

in a situation allowing for the generation of evidence of the ability to respond to problems

by using a suitable simulation andor a range of case studiesscenarios

through a combination of these techniques

In all cases it is expected that appropriate practicalsimulation assessment will be combined with targeted questioning to assess the required knowledge and theoretical assessment will be combined with appropriate practicalsimulation or similar assessment

Guidance information for assessment

Assessment processes and techniques must be appropriate to the language competency and safety requirements of the site and consistent with workplace systems or procedures


Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.

Tyre securing methods

Tyre securing methods may include, but are not limited to:

mounts and stands

chocks

wall or floor mounted frames, manually, electrically or hydraulically operated

Location of repairs

Repairs may be undertaken to the:

tread or crown, including steel components

shoulder

sidewall

bead area

liner

body cords

Curing equipment components

Curing equipment components may include, but are not limited to:

heat pads

size and shape of air bags (for a Monarch system)

contours (for a Thermopress system)

hydraulic equipment operation

pneumatic equipment operation

compressor operation

Packing

Packing includes, but is not limited to:

tread voids

flow blocks

vent supports

Tread voids are the space between the lugs on the tread. Packing is typically done on voids adjacent to a repair.

Cure cycle

Ensure that the repair has completed its required cure cycle and ensure that the temperature has been reduced to the manufacturer’s recommendations, then release pressure.

Standards

Standards may include, but are not limited to:

AS 4457.2-2008 Earth-moving machinery - Off-the-road wheels, rims and tyres - Maintenance and repair – Tyres

Rubber Manufacturer’s Association of America (RMA)

Supplier standards, such as technical data sheets and manuals

internal organisational standards

Procedures

Procedures may be written, verbal, computer-based or in some other form. They may include but are not limited to:

all work instructions

standard operating procedures

formulas/recipes

batch sheets

temporary instructions

any similar instructions provided for the smooth running of the plant

good operating practice as may be defined by industry codes of practice

Procedures would be expected to comply with any relevant government regulations.

Paperwork

Paperwork may be paper or electronic-based.

Appropriate action

Appropriate action includes but is not limited to:

determining problems needing action

accessing and applying relevant technical and plant data

applying appropriate problem solving techniques to determine possible fault causes

rectifying problem using appropriate solution within area of responsibility

following through items initiated until final resolution has occurred

reporting problems outside area of responsibility/ability to designated person

Health, safety and environment (HSE)

All operations to which this unit applies are subject to stringent HSE requirements, which may be imposed through state or federal legislation, and these must not be compromised at any time. Where there is an apparent conflict between Performance Criteria and HSE requirements, the HSE requirements take precedence.