Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Prepare the extrusion equipment
   • Determine the product formation requirements from the production program
   • Ensure the required change parts are in place
   • Ensure the required raw materials are selected and loaded or connected to the equipment
   • Ensure the equipment is safe to use
2. Operate forming equipment
   • Ensure correct vacuum is applied to raw material
   • Operate equipment to produce product of the required shape, dimensions and consistency
   • Monitor equipment conditions and adjust as required
   • Monitor and adjust product properties as required
   • Record production data as required
3. Operate surface finishing equipment
   • Operate surface patterning equipment as required
   • Operate frit application and similar equipment as required
   • Monitor operations and adjust/refill as required
   • Apply glazing material as required
4. Unload and shut down extrusion equipment
   • Unload and shut down extrusion equipment at conclusion of the production run to requirements
   • Clean up work area and perform housekeeping duties
   • Store materials appropriately
5. Rectify routine problems
   • Identify the range of faults that can occur during the operation
   • Determine and rectify fault causes in accordance with procedures/work instructions
   • Identify and rectify equipment failure causes in accordance with procedures/work instructions
   • Ensure appropriate records and log books of equipment operations are maintained to meet procedures/work instructions
   • Identify non-routine problems and report to designated person
6. Control hazards
   • Identify hazards in extruder work area
   • Assess the risks arising from those hazards
   • Implement measures to control those risks in line with procedures and duty of care

Required Skills

Required skills

Required skills include recognising conditions which will lead to out of specification product implementing the enterprises procedures and relevant regulatory requirementswithin time constraints and in a manner relevant to the operation of the equipment conveying information relevant to the operation clearly and effectively reading and numeracy to interpret workplace documents and technical information

Required knowledge

Required knowledge includes composition and nature of the products being manufactured construction and limitations of the equipment startup and shutdown processes adjustments required ability to distinguish between causes of faults such as materialmoisture equipment adjustmentset up maintenance

Evidence Required

The Evidence Guide provides advice on assessment and must be read in conjunction with the performance criteria required skills and knowledge range statement and the Assessment Guidelines for the Training Package
Overview of assessment	The unit will be assessed in as holistic a manner as is practical and may be integrated with the assessment of other relevant units of competency
Critical aspects for assessment and evidence required to demonstrate competency in this unit	It is essential that the extrusion equipment be understood and that the importance of critical material properties settings and readings is known Competence must be demonstrated in the ability to recognise and analyse potential situations requiring action and then in implementing appropriate corrective action Consistent performance should be demonstrated In particular look to see that extruder is working within limits product meets size and consistency parameters waste is properly handled product is formed without surface blemishes or damage surface treatments are applied to requirements Competence must be demonstrated in the operation of all ancillary equipment to the level required for this unit of competency
Context of and specific resources for assessment	Assessment will require access to an operating plant over an extended period of time or a suitable method of gathering evidence of operating ability over a range of situations Assessment will occur over a range of situations which will include disruptions to normal smooth operation Simulation or case studiesscenarios may be required to allow for timely assessment of parts of this unit of competency Simulation should be based on the actual plant and will include walkthroughs of the relevant competency components A bank of scenarioscase studieswhat ifs and questions will be required to probe the reasoning behind observable actions
Method of assessment	In all plants it may be appropriate to assess this unit concurrently with relevant teamwork and communication units Individual enterprises may choose to add prerequisites and corequisites relevant to their processes
Guidance information for assessment	Assessment processes and techniques must be culturally appropriate and appropriate to the language and literacy capacity of the candidate and the work being performed

---

Range Statement

The range statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance. Bold italicised wording, if used in the performance criteria, is detailed below. Essential operating conditions that may be present with training and assessment (depending on the work situation, needs of the candidate, accessibility of the item, and local industry and regional contexts) may also be included.
Procedures	All operations are performed in accordance with standard procedures and work instructions
Equipmentand unit operations	This unit includes all such items of equipment and unit operations which form part of the extrusion system. These may include: pug mill extruder including dies, wire trims or blades surface treatment applications, including frit or glaze impression rollers or moulds wire cutting machines transfer machines
Typical problems	Typical problems may include: moisture content not within specifications maladjustment of the cutting wires damage to the product
Occupational health and safety (OHS)	The identification and control of hazards and the application of OHS is to be in accordance with current, applicable legislation and regulations, and company procedures. All work is carried out at all times in accordance with these requirements

---