Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Interpret test requirements
   • Review test request to identify samples to be tested, test method and equipment involved
   • Identify hazards and enterprise controls associated with the sample, preparation methods, reagents and/or equipment
2. Prepare sample
   • Record sample description, compare with specification, record and report discrepancies
   • Prepare sample in accordance with appropriate standard methods
3. Check equipment before use
   • Set up test equipment in accordance with test method
   • Perform pre-use and safety checks in accordance with enterprise procedures and manufacturer's instructions
   • Identify faulty or unsafe equipment and report to appropriate personnel
   • Check calibration status of equipment and report any out of calibration items to appropriate personnel
4. Perform tests on samples
   • Identify, prepare and weigh or measure sample and standards to be tested
   • Conduct tests in accordance with enterprise procedures
   • Record data in accordance with enterprise procedures
   • Perform calculations on data as required
   • Identify and report 'out of specification' or atypical results promptly to appropriate personnel
   • Shut down equipment in accordance with operating procedures
5. Maintain a safe work environment
   • Use established safe work practices and personal protective equipment to ensure personal safety and that of other laboratory personnel
   • Minimise the generation of wastes and environmental impacts
   • Ensure safe disposal of laboratory and hazardous wastes
   • Clean, care for and store equipment and reagents as required.

Required Skills

Evidence Required

The Evidence Guide describes the underpinning knowledge and skills that must be demonstrated to prove competence

Critical aspects of competency

Competency must be demonstrated in the ability to perform consistently at the required standard In particular assessors should look to see that the candidate

interprets enterprise procedure or standard methods accurately

uses safety information for example MSDSs and performs procedures safely

checks test equipment before use

completes all tests within required timeline without sacrificing safety accuracy or quality

calculates records and presents results accurately and legibly

maintains security integrity and traceability of all samples dataresults and documentation

cleans and maintains equipment

Underpinning knowledge

Competency includes the ability to apply and explain

purpose of test

principles of the standard method

preuse equipment checks

relevant standardsspecifications and their interpretation

sources of uncertainty in measurement and methods for control

enterprise andor legal traceability requirements

interpretation and recording of test result including simple calculations

procedures for recognitionreporting of unexpected or unusual results

relevant health safety and environment requirements

Assessment context and methods

This unit of competency is to be assessed in the workplace or simulated workplace environment

The following assessment methods are suggested

review of the quality of test dataresults achieved by the candidate over time

inspection of records and workplace documentation completed by the candidate

feedback from peers and supervisors

observation of the candidate performing a range of basic tests

oral or written questioning to check underpinning knowledge of test procedures

In all cases practical assessment should be supported by questions to assess underpinning knowledge and those aspects of competency which are difficult to assess directly Questioning techniques should suit the language and literacy levels of the candidate

Interdependent assessment of unit

This unit of competency may be assessed with

PMLDATAA Record and present data

PMLDATA200A Record and present data.

Resource implications

Resources may include

standard laboratory equipped with appropriate equipment standards and materials

enterprise procedures and standard methods equipment manuals

material safety data sheets MSDSs

This competency in practice

Manufacturing

Standard testing methods may be viewed as legal requirements that must be followed to ensure that a product manufactured in a chemical plant meets the specification by which it is sold to the customer Technical assistants perform tests in a quality control laboratory to ensure that material meets legal requirements and the material is safe and effective in use Peroxides may be present in ether as a result of lightcatalysed air oxidation Peroxides are toxic and can give rise to mixtures which are explosive when distilled Technical assistants test ether to ensure that the level of peroxide is within acceptable limits The test is done by shaking ether with a solution of potassium iodide After standing for minutes in the dark the yellow colour of the aqueous phase due to the liberation of iodine must not be more intense than a prepared standard solution These tests ensure the quality and safety of the ether

Food processing

A Snack Food Company produces a range of high quality impulse purchase snack foods Some of these products are moisture andor oxygen sensitive and are therefore packaged in multilayer flexible packaging to provide optimum shelflife The packaging must also be able to withstand the rigours of the production and distribution process While the packaging is purchased to meet the shelflife and distribution specifications the quality assurance program requires the periodic evaluation of the packaging materials against these specifications A laboratory assistant uses standard methods to test the tearing resistance bursting strength impact resistance and permeability andor leakage of the snack food packaging Tests are also conducted on aspects of the manufacturing process that can affect shelflife These tests involve the measuring of the heatseam strength and the sealing performance of the closure process The test results are recorded by the laboratory assistant to verify the conformance of the materials to the supplier specifications and of the process to the manufacturing specifications The assistant reports any anomalies or nonconformances to the appropriate personnel

Key Competencies

The seven key competencies represent generic skills considered for effective work participation The bracketed numbering against each of the key competencies indicates the performance level required in this unit These are standalone levels and do not correspond to levels in the Australian Qualifications Framework AQF

Level represents the competence to undertake tasks effectively

Level represents the competence to manage tasks

Level represents the competence to use concepts for evaluating and reshaping tasks

Collecting analysing and organising information	Communicating ideas and information	Planning and organising activities	Working with others and in teams	Using mathematical ideas and techniques	Solving problems	Using technology
Level	Level	Level	Level	Level	Level	Level

---

Range Statement

The range of variables relates to the unit of competency as a whole. It allows for different work environments and situations that will affect performance.

Where reference is made to industry Codes of Practice, and/or Australian/international standards, it is expected the latest version will be used.

This unit of competency describes the work conducted by supervised laboratory assistants who perform a range of basic tests and measurements.

All operations must comply with relevant standards, appropriate procedures and/or enterprise requirements. These procedures include or have been prepared from:

Australian and international standards, such as:

AS ISO/IEC 17025 General requirements for the competence of testing and calibration laboratories

AS/NZS 2243.2 Chemical aspects

AS 2243.6 Mechanical aspects

AS 2243.10 Storage of chemicals

AS 2830 Good laboratory practice

Codes of Practice (such as GLP and GMP)

material safety data sheets (MSDSs) and safety procedures

standard operating procedures (SOPs)

equipment manuals

equipment startup, operation and shutdown procedures

calibration and maintenance schedules

quality manuals

enterprise recording and reporting procedures

production and laboratory schedules

material, production and product specifications.

Codes of Practice.

Preparation of samples can include:

sub-sampling or splitting using procedures, such as: riffling, coning and quartering, manual and mechanical splitters

diluting samples

physical treatments, such as ashing, dissolving, filtration, sieving, centrifugation and comminution

moulding, casting or cutting specimens.

Typical tests carried out by laboratory/field assistants could include:

visual/optical tests of appearance, colour, texture, identity, turbidity, refractive index (alcohol content, Baume/Brix)

physical tests, such as:

density, specific gravity, compacted density

moisture content, water activity

particle size, particle shape, size distribution

chemical tests, such as:

gravimetric

colorimetric

electrical conductivity (EC), pH

specific ions using dipsticks and kits

nutrients (for example nitrates, orthophosphates) using basic kits

ashes, including sulphated ashes

biological/environmental tests, such as:

pH, oxygen reduction potential (ORP), dissolved oxygen (DO), electrical conductivity

E coli using test kits

surface hygiene/presence of microbes

packaging tests, such as:

tearing resistance, bursting strength, impact resistance

permeability and/or leakage

mechanical tests, such as:

Emerson class

concrete slump

Other measurements may include:

simple ground surveys

meteorological parameters, such as: wind direction/strength, rainfall, max./min. temperature, humidity, solar radiation

simple background radiation survey

production/process parameters, such as temperature, flow, pressure

gas levels in a confined space.

Common measuring equipment may include:

dimension apparatus

dissolved oxygen (DO), electrical conductivity (EC)

analogue and digital meters, charts/recorders

basic chemical and biological test kits

dipsticks and site test kits (for example, HACK)

timing devices

temperature measuring devices, such as thermometers, thermocouples.

Hazards may include:

electric shock

biohazards, such as microbiological organisms and agents associated with soil, air, water, blood and blood products, human or animal tissue and fluids

solar radiation, dust, noise

chemicals, such as: sulphuric acid, fluorides, hydrocarbons

aerosols

sharps, broken glassware and hand tools

flammable liquids

dry ice and liquid nitrogen

fluids under pressure

sources of ignition

occupational overuse syndrome, slips, trips and falls

manual handling, working at heights and in confined spaces

crushing, entanglement, cuts associated with moving machinery or falling objects.

Enterprise controls to address hazards may include:

use of material safety data sheets (MSDS)

use of signage, barriers and service isolation tags

use of personal protective equipment, such as hard hats, hearing protection, sunscreen lotion, gloves, safety glasses, goggles, face guards, coveralls, gown, body suits, respirators and safety boots

use of appropriate equipment, such as biohazard containers and cabinets, laminar flow cabinets

recognising and observing hazard warnings and safety signs

labelling of samples, reagents, aliquoted samples and hazardous materials

handling and storage of all hazardous materials and equipment in accordance with labelling, materials safety data sheets and manufacturer's instructions, enterprise procedures and regulations

cleaning and decontaminating equipment and work areas regularly using recommended procedures

following established manual handling procedures for tasks involving manual handling.

Minimising environmental impacts may involve:

recycling of non-hazardous waste, such as chemicals, batteries, plastic, metals, glass

appropriate disposal of hazardous waste

correct disposal of excess sample/test material

correct storage and handling of hazardous chemicals.

Health, safety and environment

All operations to which this unit applies are subject to stringent health, safety and environmental (HSE) requirements, which may be imposed through State or Federal legislation, and these must not be compromised at any time. Where there is an apparent conflict between performance criteria and HSE requirements, the HSE requirements take precedence.

All operations assume the potentially hazardous nature of samples and require standard precautions to be applied. Users should access and apply current industry understanding of infection control issued by the National Health and Medical Research Council and State and Territory Departments of Health. All operations are performed in accordance with standard operating procedures.

---