Elements and Performance Criteria
- Prepare for hover–exit operations
- Hover–exit equipment is selected and prepared in accordance with organisational requirements.
- Appropriate clothing and equipment are worn in accordance with organisational requirements.
- Pre-flight checks on clothing and equipment are undertaken in accordance with organisational procedures.
- Damage to firefighting and safety equipment is reported to relevant supervisor for repair, replacement or disposal.
- General aircraft safety briefing is obtained from pilot, crew person, or airbase/helibase manager.
- Load hover–exit personnel and equipment into helicopter
- Firefighting and safety equipment are assembled, weighed and recorded.
- Pilot is informed of weights.
- Equipment is loaded into helicopter and secured under pilot or flight crew supervision.
- Instructions are obtained from pre-mission briefing and clarification of objectives and procedures is sought where required
- Personnel are secured in seatbelts in accordance with workplace instructions.
- Pre-flight safety briefing is obtained from pilot or aircrew.
- Prepare to exit from hovering helicopter
- Appropriate landing technique is selected and used in accordance with ground and safety conditions.
- Following clearance from pilot and hover–exit crew leader, instructions are received to prepare for exit.
- Seatbelt is released and then resecured prior to moving towards the helicopter doorway in accordance with organisational procedures and instructions received.
- Pre-descent checks are conducted in accordance with organisational requirements.
- Clearance is obtained from the pilot and hover–exit crew leader to disembark.
- Emergency procedures are conducted as required.
- Emergency commands are responded to in accordance with organisational procedures.
- Exit from hovering helicopter
- Hover–exit operations are undertaken in accordance with work health and safety requirements.
- Actions are undertaken to minimise uncommanded movement of the helicopter during transfer to the ground in accordance with workplace instructions.
- Assembly point for individual/s and equipment is identified and reached.
- All-clear signal is communicated to pilot or crew person when landing activity is complete.
- Under instruction from the hover–exit crew leader, individual/s and equipment are transferred between the helicopter and the ground according to agency procedures.
- Emergency procedures are conducted as required.
- Emergency commands are responded to in accordance with organisational procedures.
- Undertake hover–entry to helicopter
- Individual/s and equipment are located at the nominated assembly point in preparation for hover–entry.
- Following clearance from pilot and hover–exit crew leader, movement towards the helicopter is undertaken in accordance with organisational procedures and instructions received.
- Actions to minimise uncommanded movement of the helicopter during transfer from the ground to the helicopter are undertaken in accordance with workplace instructions.
- Movement on board the helicopter and toward the helicopter seat is undertaken in accordance with workplace instructions and instructions received.
- Seatbelts are secured unless clearance is obtained to commence movement within the helicopter in accordance with organisational safe work practices.
- Seatbelts remain secured until the helicopter has landed and clearance is obtained to commence movement within the helicopter.
- Perform maintenance on equipment
- Equipment is inspected and required maintenance is performed in accordance with organisational or manufacturer requirements.
- Damage to equipment is reported to relevant supervisor for repair, replacement or disposal.
- Maintenance or damage to equipment is documented and reported according to procedures.