Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Plan and prepare to install cure in-place linings for existing pipeline systems
   • Access, interpret and apply cure in-place linings for existing pipeline system installation documentation and ensure the work activity is compliant
   • Obtain, read, interpret, clarify and confirm work requirements
   • Identify and address potential risks, hazards and environmental issues and implement control measures
   • Select and wear personal protective equipment appropriate for work activities
   • Identify, obtain and implement signage requirements from the project traffic management plan
   • Identify and select plant, tools and equipment, check for serviceability and rectify or report any faults
2. Perform site survey
   • Notify and obtain approval from property owners and occupiers for entry onto their property
   • Determine site conditions by visual inspection, plans, discussion with land owners and information from service utilities
   • Located underground utilities
   • Maintain system serviceability during rehabilitation works
   • Survey and record existing site conditions
3. Initiate rehabilitation work
   • Prepare entry and exit pits where specified
   • Identify, interpret and apply confined space entry procedures
   • Monitor installation process and finished product to ensure conformity to the design requirements
4. Complete cure in-place lining
   • Determine fault with the aid of plans, drawings, CCTV recordings or other mechanisms
   • Select resin impregnated liners appropriate to the fault
   • Apply pressure cleaning to the designated location
   • Install cure in-place lining material
   • Conduct curing process
   • Correctly secure and seal termination at ends of process
   • Open junctions for inspection and operation
   • Monitor installation process and finished product to ensure conformity to the design requirements
5. Clean up
   • Clear work area and dispose of, reuse or recycle materials
   • Clean, check, maintain and store plant, tools and equipment
6. Plan and prepare to install cure in-place linings for existing pipeline systems
   • Access, interpret and apply cure in-place linings for existing pipeline system installation documentation and ensure the work activity is compliant
   • Obtain, read, interpret, clarify and confirm work requirements
   • Identify and address potential risks, hazards and environmental issues and implement control measures
   • Select and wear personal protective equipment appropriate for work activities
   • Identify, obtain and implement signage requirements from the project traffic management plan
   • Identify and select plant, tools and equipment, check for serviceability and rectify or report any faults
7. Perform site survey
   • Notify and obtain approval from property owners and occupiers for entry onto their property
   • Determine site conditions by visual inspection, plans, discussion with land owners and information from service utilities
   • Located underground utilities
   • Maintain system serviceability during rehabilitation works
   • Survey and record existing site conditions
8. Initiate rehabilitation work
   • Prepare entry and exit pits where specified
   • Identify, interpret and apply confined space entry procedures
   • Monitor installation process and finished product to ensure conformity to the design requirements
9. Complete cure in-place lining
   • Determine fault with the aid of plans, drawings, CCTV recordings or other mechanisms
   • Select resin impregnated liners appropriate to the fault
   • Apply pressure cleaning to the designated location
   • Install cure in-place lining material
   • Conduct curing process
   • Correctly secure and seal termination at ends of process
   • Open junctions for inspection and operation
   • Monitor installation process and finished product to ensure conformity to the design requirements
   • Clear work area and dispose of, reuse or recycle materials
   • Clean, check, maintain and store plant, tools and equipment

Performance Evidence

Evidence is required to be collected that demonstrates a candidate’s competency in this unit. Evidence must be relevant to the roles within this sector’s work operations and satisfy all of the requirements of the performance criteria of this unit and include evidence that the candidate:

locates and applies applicable documentation, policies and procedures

implements the requirements, procedures and techniques for the safe, effective and efficient installing of cure in-place linings for existing pipeline systems including:

selecting and using the required tools and equipment

determining site conditions and locating underground utilities

preparing exit and entry pits

undertaking confined space entry

identifying and selecting resin impregnated liners

monitoring installation process and the finished product

works effectively with others to undertake and complete the installation of cure in-place linings for existing pipeline systems that meets all of the required outcomes including:

using a range of communication techniques and equipment to convey information to others

maintaining written and verbal reporting requirements and procedures

organising work activities to meet all task requirements

demonstrates completion of installing cure in-place linings for existing pipeline systems that safely, effectively and efficiently meets all of the required outcomes on more than one (1) occasion including:

completing a minimum of two (2) cure in-place linings for existing pipeline systems

identifying, obtaining, confirming and applying work, safety and signage instructions and requirements

cleaning, checking, maintaining and storing plant, tools and equipment

---

Knowledge Evidence

The candidate must demonstrate knowledge in installing cure in-place linings for existing pipeline systems through:

organisation and site requirements and procedures for:

work health and safety

operating equipment

confined space entry

operations, maintenance and basic diagnostics

project quality management

installing cure in-place linings

laser control equipment techniques

manual handling techniques

remote units

engineering drawings, plans and specifications

equipment types, characteristics, technical capabilities and limitations

site isolation and traffic control responsibilities

safety data sheets and materials handling methods

pipeline systems

civil construction terminology

---