Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

Required Skills

Evidence Required

What evidence is required to demonstrate competence for this standard as a whole

Competence in troubleshooting faulty components and blockages in irrigation systems requires evidence that a person can locate isolate and replace faulty components and blockages and return the system to normal operating status

The skills and knowledge required to troubleshooting faulty components and blockages in irrigation systems must be transferable to a different work environment For example this could include different systems components enterprise procedures and access difficulties

What specific knowledge is needed to achieve the performance criteria

Knowledge and understanding are essential to apply this standard in the workplace to transfer the skills to other contexts and to deal with unplanned events The knowledge requirements for this competency standard are listed below

identification characteristics and operation of replaceable components of irrigation systems

system malfunctions and their likely causes

environmental impacts of irrigation using water from any ground or underground source

purchasing procedures

isolation procedures

enterprise policies and procedures

irrigation OHS and environmental guidelines

What specific skills are needed to achieve the performance criteria

To achieve the performance criteria appropriate literacy and numeracy levels as well as some complementary skills are required These include the ability to

read and apply system specifications technical manuals and supplyspare parts inventories

record and report maintenance activities

identify adverse environmental impacts of irrigation activities and appropriate remedial action

operate maintain and repair irrigation systems

implement and follow relevant enterprise OHS and environmental policies and procedures

What processes should be applied to this competency standard

There are a number of processes that are learnt throughout work and life which are required in all jobs They are fundamental processes and generally transferable to other work functions Some of these are covered by the key competencies although others may be added The questions below highlight how these processes are applied in this competency standard Following each question a number in brackets indicates the level to which the key competency needs to be demonstrated where not required perform the process perform and administer the process and perform administer and design the process

How can communication of ideas and information be applied

Order replaceable components from suppliers

How can information be collected analysed and organised

Collecting and assessing system performance data

How are activities planned and organised

Organising shut down and repair activities

How can team work be applied

Checking and reviewing monitoring and maintenance records completed by others

How can the use of mathematical ideas and techniques be applied

Interpreting system performance data and purchasing parts within budget

How can problemsolving skills be applied

Identifying and replacing faulty components

How can the use of technology be applied

Using computerised irrigation systems

Are there other competency standards that could be assessed with this one

This competency standard could be assessed on its own or in combination with other competencies relevant to the job function

There is essential information about assessing this competency standard for consistent performance and where and how it may be assessed in the Assessment Guidelines for this Training Package All users of these competency standards must have access to the Assessment Guidelines Further advice may also be sought from the relevant sector booklet

Range Statement

Range of Variables The Range of Variables explains the contexts within which the performance and knowledge requirements of this standard may be assessed. The scope of variables chosen in training and assessment requirements may depend on the work situations available

What irrigation systems might be relevant to this standard?	These may be pressurised irrigation systems such as micro-irrigation, spray irrigation or gravity fed irrigation systems. Micro-irrigation systems include mains pressure, low pressure, below or above ground, sprays systems, drip emitter trickle, t-tape, mini-sprinklers, capillary, ebb and flow, and flood systems. Spray irrigation systems include travelling irrigators (soft hose, hard hose boom type) centre pivot, linear move, powered side roll hand shift permanent (installed), and bike shift/easy shift. Gravity fed irrigation systems include border check, contour irrigation, furrow irrigation, hillside flooding and basin irrigation. Border check systems may be either permanent or temporary earth, plastic or concrete devices for insertion in a drain for reticulating water, contour banks used to collect and distribute water along the perimeter of an irrigation plot, contour banks within a plot to collect/distribute water or larger scale systems to stop water exiting one area to another. Irrigation systems may range from manual operation and monitoring to fully automated with computer control and monitoring.

What faulty components or system parts might need to be replaced?	These may vary according to brand and supplier and may include, but not be limited to, injectors, pumps, tensiometers, probe tubes, flow meter, pressure gauge, controllers, solenoid valves, wiring, quick coupling valves (QCV), computer and/or other scheduling devices, pipes, jets, micro jets, laterals, sprinklers, emitters, integrated dripline "thin wall", seals, outlets and gears.
What operational tests of the system may be conducted?	These may include pressures, flow rates, sprinkler performance, calculation of co-efficient of uniformity and distribution uniformity.
What might be the OHS requirements for maintenance activities?	Requirements may include systems and procedures for safe manual handling, outdoor work (including protection from solar radiation, dust and noise), selection, use and maintenance of relevant personal protective clothing and equipment, selection, care and safe use of hand tools and safe systems for the prevention of electrical injury.
What may be involved in gaining access to faulty components or blockages?	Gaining access may require specific approvals from property owners/managers and may involve excavation work.
How might faulty components be disposed of?	Disposal of faulty components must occur in an environmentally responsible way. For example, metal and plastic components may be recycled, returned to the manufacturer, or disposed of in accordance with enterprise procedures.
For more information on contexts, environment and variables for training and assessment, refer to the Sector Booklet.