Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

  1. Monitor the condition of the vessel
  2. Rectify identified problems with the condition of the vessel

Required Skills

REQUIRED KNOWLEDGE

This describes the knowledge required for this unit

Relevant sections of State and Territory marine regulations NSCV and USL Code

Relevant OHampS and pollution control legislation codes of practice policies and procedures

Typical procedures for the checking and inspecting a vessels seaworthiness to ensure compliance with company procedures and established safety rules and regulations

Damage control measures that may be required to maintain the integrity of the hull in a range of typical emergency situations that could occur on a vessel and the specific action to be taken in the event of flooding of a vessel

Construction features and materials and stress characteristics for small vessels of up to kW propulsion power

Construction features and materials and stress characteristics for small vessels of up to 1,500kW propulsion power

Procedures for the initiation and coordination of repair andor replacement procedures on board vessels

Typical corrosion control measures including surface preparation and painting and antifouling

Safety environmental and hazard control precautions and procedures relevant to inspection and maintenance operations

Principal features of the structure of a vessel

The basic properties and application of materials used in vessel construction

Construction layout and subdivision requirements of a typical vessel including freeboard and bulkhead deck watertight compartments weathertight compartments and the bulkhead of the vessel

Principles and procedures to ensure the watertight integrity of a vessels hull in both normal and emergency situations

Maritime communication techniques needed when monitoring the condition of a vessel and taking any related action

Types of records that must be maintained regarding hull damage incidents and inspections of the seaworthiness of a vessel to meet the requirements of the company and regulatory authorities

TDMMBB EMPLOY DAMAGE CONTROL TECHNIQUES FOR HULL DAMAGE

TDMMB3507B EMPLOY DAMAGE CONTROL TECHNIQUES FOR HULL DAMAGE

REQUIRED SKILLS

This describes the basic skills required for this unit

Use verbal communication skills required when applying control techniques for hull damage on a small vessel

Read and interpret maintenance and service manuals and instructions and equipment specifications and drawings for equipment and machinery including all required OHampS procedures and precautions

Read and interpret material safety data sheets

Observe and interpret indications of damage to a vessels hull

Complete any required maintenance records

Provide leadership to other crew members when applying control techniques for hull damage

Work safely and collaboratively with others when applying control techniques for hull damage

Plan and organise the application of control techniques for hull damage

Monitor the selection and use of relevant tools and equipment as per instructions

Recognise damage to the hull of a small vessel and take appropriate action as per operating instructions

Recognise routine problems when applying control techniques for hull damage on a small vessel and take appropriate action

Adapt to differences in vessels equipment and machinery and operating and servicing procedures

Evidence Required

TDMMBB EMPLOY DAMAGE CONTROL TECHNIQUES FOR HULL DAMAGE

TDMMB3507B EMPLOY DAMAGE CONTROL TECHNIQUES FOR HULL DAMAGE

The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria the Range Statement and the Assessment Guidelines for this Training Package

The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, , the Range Statement and the Assessment Guidelines for this Training Package.

Critical aspects of evidence required to demonstrate competency in this unit

Assessment must confirm appropriate knowledge and skills to

a

Monitor and evaluate the condition of the hull and the seaworthiness of a small vessel under normal and emergency situations

b

Identify any damage or deterioration of the vessels hull structure or related equipment

c

Take appropriate preventative and remedial action to maintain the security and watertight integrity of the vessels hull

d

Initiate and coordinate measures to control any damage to the hull of a small vessel in accordance with company procedures and manufacturers instructions

e

Identify typical problems related to the seaworthiness of a vessel and take appropriate action in conjunction with others

f

Exercise all required safety environmental and hazard control precautions and procedures during damage control operations

g

Communicate effectively with others when taking action to maintain the seaworthiness of the vessel

Evidence required for demonstration of consistent performance

a

Performance is demonstrated consistently over a period of time and in a suitable range of contexts

b

Consistently applies underpinning knowledge and skills when

carrying out routine and emergency monitoring of a vessels hull and seaworthiness

identifying and evaluating problems concerning the condition of a vessel and the integrity of its hull and determining appropriate courses of action

initiating and coordinating any required repair or maintenance activities to ensure the seaworthiness of a vessel

applying safety precautions relevant to monitoring repair and maintenance operations

identifying and implementing improvements to procedures for monitoring the condition of the hull and the seaworthiness of a vessel

c

Shows evidence of application of relevant workplace procedures including

relevant sections of the State and Territory marine regulations the National Standard for Commercial Vessels and USL Code

OHampS regulations and hazard prevention policies and procedures

continued

TDMMBB EMPLOY DAMAGE CONTROL TECHNIQUES FOR HULL DAMAGE

TDMMB3507B EMPLOY DAMAGE CONTROL TECHNIQUES FOR HULL DAMAGE

Evidence required for demonstration of consistent performance

continued

issue resolution procedures

job procedures and work instructions

relevant vessel manufacturers guidelines relating to the watertight integrity of the hull and the seaworthiness the vessel

quality procedures where existing

procedures to protect the integrity and security of the vessels hull

d

Action is taken promptly to report andor rectify problems with the seaworthiness of a vessel and the integrity of its hull in accordance with manufacturers instructions statutory requirements and company procedures

e

Recognises and adapts appropriately to cultural differences on board vessel in behaviour and interactions among officers crew and passengers where relevant

f

Work is completed systematically with required attention to detail

Context of assessment

a

Assessment of competency must comply with the assessment requirements of the relevant maritime regulations

b

Assessment of this unit must be undertaken within relevant marine authority approved and audited arrangements by a registered training organisation

As a minimum assessment of knowledge must be conducted through appropriate writtenoral examinations and

Appropriate practical assessment must occur

i

at the registered training organisation andor

ii

on an appropriate working or training vessel

Specific resources required for assessment

Access is required to opportunities to

a

participate in a range of exercises case studies and other simulated practical and knowledge assessments that demonstrate the skills and knowledge to monitor hull condition and carry out damage control measures in the event of hull damage on a small vessel andor

b

assist in maintaining the hull integrity and seaworthiness of a vessel in a range of operational situations either

i

using an appropriate simulator over an appropriate range of simulated hull damage situations

ii

in appropriate practical real or simulated situations on an operational small commercial or training vessel up to kW propulsion power

in appropriate practical real or simulated situations on an operational small commercial or training vessel up to 1,500kW propulsion power


Range Statement

TDMMB3507B EMPLOY DAMAGE CONTROL TECHNIQUES FOR HULL DAMAGE

The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.

VARIABLE

SCOPE

1. GENERAL CONTEXT

a.

Work must be carried out:

1

in compliance with the relevant sections of the State and Territory marine regulations, the National Standard for Commercial Vessels and USL Code

b.

Work is performed:

1

within broad operational requirements, with responsibility for own outputs in relation to specified quality standards and limited responsibility for others in achieving the specified quality and quantity of outcomes

c.

Work involves:

1

application of established marine techniques for the damage control of a damaged hull on a small vessel and the application of solutions to a defined range of unpredictable hull damage situations. Planning and administering the damage control procedures is required

d.

Work requires:

1

the exercise of some discretion and responsibility for the management of damage control measures in the event of damage to the hull of a small vessel

2. WORKSITE ENVIRONMENT

a

Vessel may include:

1

any Australian commercial vessel up to 1,500kW propulsion power

b

Damage control measures may need to be exercised:

1

by day or night in both normal and emergency situations

2

under any possible conditions of sea, weather and loading

3

while underway

4

during berthing and unberthing operations

5

while anchoring or mooring

c

Damage to the hull of a vessel may occur through:

1

collision with another vessel

2

running aground

3

excessive stress on a vessel's hull structure

4

effects of heavy seas and weather conditions

(continued)

TDMMB3507B EMPLOY DAMAGE CONTROL TECHNIQUES FOR HULL DAMAGE

VARIABLE

SCOPE

c

Damage to the hull of a vessel may occur through:

(continued)

5

deterioration or corrosion of vessel's hull and structure

6

explosion on board the vessel

7

fire on board the vessel

8

failure of pressurised pipes

d

Damage control measures in a flooding emergency may include:

1

use of softwood wedges and plugs to reduce water ingress

2

application of shoring techniques

3

construction and fitting of a leak stopping mat

4

temporary repair of a ruptured pressurised pipe

5

operation of portable salvage pumps

e

Action taken to monitor the condition and seaworthiness of a vessel may include:

1

routine inspections

2

checks prior to departure

3

checks on completion of a voyage

4

checks on completion of maintenance activities

5

checks in anticipation of a change in sea and weather conditions

6

use of testing tanks to check watertight integrity

7

checks during an emergency which may have caused damage or changes to the seaworthiness of the vessel

f

Repairs and maintenance procedures may include:

1

repairs to equipment, components, hull and vessel's structure

2

basic surface repairs

3

replacement of faulty equipment or components

g

Documentation and records

may include:

1

vessel's damage control and emergency procedures

2

vessel's log

3

company procedures for monitoring of condition and seaworthiness of vessel

4

vessel and equipment manufacturer's instructions, specifications and recommended procedures

5

maintenance schedules and records

(continued)

TDMMB3507B EMPLOY DAMAGE CONTROL TECHNIQUES FOR HULL DAMAGE

VARIABLE

SCOPE

g

Documentation and records

may include:

(continued)

6

relevant sections of the State and Territory marine regulations, the National Standard for Commercial Vessels and USL Code

7

Notices and instructions of relevant maritime authorities related to the seaworthiness of vessels

8

relevant Australian and international standards

h

Applicable legislation, regulations and codes may include:

1

State and Territory marine regulations related to the operation of small vessels

2

National Standard for Commercial Vessels and USL Code

3

relevant Commonwealth, State and Territory OH&S legislation