Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

  1. Manoeuvre the vessel for normal operations

Required Skills

REQUIRED KNOWLEDGE

This describes the knowledge required for this unit

Sections of relevant maritime regulations

Relevant OHampS legislation codes of practice policies and procedures

Limits of responsibility of a Master and Skipper as described in applicable sections of StateTerritory maritime licensing and regulatory requirements and the National Standard for Commercial Vessels NSCVand the USL Code

Methods for controlling vessel speed and direction

Vessel turn techniques including Williamson turn and short turn around

Techniques for turning a vessel across the tide across the wind

Typical manoeuvring characteristics and small power plant operational techniques for vessel within the limits of responsibility of Master and Skipper including stopping distances and turning circles at various draughts speeds and loading

Effects of deadweight draught trim speed and underkeel clearance on turning circles and stopping distances

Squat shallow water and similar effects on vessels handling

Effects on vessel handling of wind currents and bottom topography

Typical manoeuvring problems for vessels up to m in length on international voyages or up to m in length on coastal voyages or m in length where gross tonnage does not exceed gross tonnage and appropriate action and solutions

Manoeuvring procedures in and near traffic separation schemes and vessel traffic service areas

Methods for a recovering a person from the water

Maritime communication techniques including issuing of helm and engine orders and tug communications

TDMMCB MANOEUVRE THE VESSEL AND OPERATE SMALL POWER PLANTS WITHIN THE LIMITS OF RESPONSIBILITY OF A MASTER

TDMMC407B MANOEUVRE THE VESSEL AND OPERATE SMALL POWER PLANTS WITHIN THE LIMITS OF RESPONSIBILITY OF A MASTER 3

REQUIRED SKILLS

This describes the basic skills required for this unit

Communicate effectively with other personnel and passengers during vessel manoeuvres

Issue helm and engine orders

Read and interpret vessel manufacturers instructions on vessel operation

Read and interpret vessel marine regulations rules and instructions concerning vessel operations

Collect manage and interpret information required for the safe navigation of the vessel

Plan the timing and sequence of vessel operations to be appropriate to the prevailing circumstances sea and weather conditions and any navigational hazards

Work collaboratively with other shipboard personnel and passengers during vessel operations

Make appropriate determinations and calculations required during the course of vessel operations eg fuel distance speed time etc

Determine the type and extent of an emergency and determine the appropriate survival action to be taken

Recognise the effects of various operational situations such as interaction effects with passing vessels squat shallow water and narrow channel on vessels handling and determine appropriate manoeuvring action required

Operate the vessel in accordance with manufacturers instructions

Turn the vessel in various operational situations

Manoeuvre the vessel with minimal wash

Evidence Required

continued

TDMMCB MANOEUVRE THE VESSEL AND OPERATE SMALL POWER PLANTS WITHIN THE LIMITS OF RESPONSIBILITY OF A MASTER

TDMMC407B MANOEUVRE THE VESSEL AND OPERATE SMALL POWER PLANTS WITHIN THE LIMITS OF RESPONSIBILITY OF A MASTER 3

Evidence required for demonstration of consistent performance

continued

waste pollution and recycling management processes

d

Action is taken promptly to report andor rectify accidents and incidents in accordance with statutory requirements and company procedures

e

Work is completed systematically with required attention to detail

f

Recognises and adapts appropriately to cultural differences in the workplace including modes of behaviour and interactions among crew and others

Context of assessment

a

Assessment of competency must comply with the assessment requirements of the relevant maritime regulations

b

Assessment of this unit must be undertaken within relevant marine authority approved and audited arrangements by a registered training organisation

As a minimum assessment of knowledge must be conducted through appropriate writtenoral examinations and

Appropriate practical assessment must occur

i

at the registered training organisation andor

ii

on an appropriate working or training vessel

Specificresourcesrequired for assessment

Access is required to opportunities to

a

operate a suitable vessel simulator over an appropriate range of simulated manoeuvring situations weather and loading conditions andor

b

manoeuvre a vessel up to m in length on international voyages or up to m in length on coastal voyages or m in length where gross tonnage does not exceed gross tonnage in an appropriate range of situations weather and loading conditions

Range Statement

TDMMC407B MANOEUVRE THE VESSEL AND OPERATE SMALL POWER PLANTS WITHIN THE LIMITS OF RESPONSIBILITY OF A MASTER 3

The Range Statement relates to the unit of competency as a whole. It allows for different work environments and situations that may affect performance.

VARIABLE

SCOPE

1. GENERAL CONTEXT

a.

Work must be carried out:

1

in compliance with the relevant maritime regulations

b.

Work is performed:

1

within broad operational requirements, with responsibility for own outputs in relation to specified quality standards and limited responsibility for others in achieving the specified quality and quantity of outcomes

c.

Work involves:

1

the operation of small marine power plants and the application of nautical principles and manoeuvring techniques across a defined range of contexts. Planning and carrying out the required manoeuvres for a vessel is required

d.

Work requires:

1

limited responsibility for the management of the manoeuvring of a vessel up to 35 m in length on international voyages or up to 80 m in length on coastal voyages (or 100 m in length where gross tonnage does not exceed 3,000 gross tonnage) to ACMW

2. WORKSITE ENVIRONMENT

a

Vessel may include:

1

a commercial vessel

less than 35 metres in length for unlimited domestic operations

less than 80 metres in length for ACMW operations (within 600 nm)

that is both less than 3,000 GT and less than 100 metres in length, for ACMW operations (within 600 nm)

b

Manoeuvres may be carried out

1

by day or night in normal operational situations

2

under normal and adverse conditions of sea and weather

3

during berthing and unberthing operations

4

while anchoring or mooring

c

Manoeuvres may include:

1

berthing and unberthing

2

mooring or anchoring

(continued)

TDMMC407B MANOEUVRE THE VESSEL AND OPERATE SMALL POWER PLANTS WITHIN THE LIMITS OF RESPONSIBILITY OF A MASTER 3

c

Manoeuvres may include:

(continued)

3

handling vessel in shallow water, rivers, estuaries and restricted waters

4

navigating in and near traffic separation schemes and vessel traffic service areas

5

use of small marine power plants

6

clearing a fouled anchor

d

Special handling techniques required may include:

1

launching rescue boats and survival craft

2

taking on board survivors from rescue boats and survival craft

3

manoeuvring to rescue a person overboard

4

keeping an unmanageable vessel out of the trough of the sea

5

lessening drift

e

Documentation and recordsmay include:

1

operational orders

2

navigational charts

3

relevant maritime regulations

4

vessel's log

5

vessel's operational plan

6

company procedures

7

vessel manufacturer's instructions and recommended procedures

8

instructions of relevant maritime authorities

9

relevant Australian and international standards

f

Applicable legislation, regulations and codes may include:

1

relevant sections of State and Territory maritime regulations, the NSCV and the USL Code

2

Sections of the IMO STCW 95 Convention and Code related to a vessel within the limits of responsibility of a Master 3 or Skipper 1

3

relevant sections of AMSA Marine Orders

4

International Regulations for Preventing Collisions at Sea

5

relevant OH&S legislation

TDMMC407B MANOEUVRE THE VESSEL AND OPERATE SMALL POWER PLANTS WITHIN THE LIMITS OF RESPONSIBILITY OF A MASTER 3

The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, , the Range Statement and the Assessment Guidelines for this Training Package.

1

Critical aspects of evidence required to demonstrate competency in this unit

Assessment must confirm appropriate knowledge and skills to:

a

Manoeuvre the vessel:

1

safely in both normal situations

2

in normal and adverse weather conditions

3

in berthing and unberthing operations

4

when anchoring or mooring

b

Exercise all required safety and hazard control procedures when manoeuvring the vessel

c

Identify typical manoeuvring problems and take appropriate action

d

Communicate effectively with others during manoeuvring operations

2

Evidence required for demonstration of consistent performance

a

Performance is demonstrated consistently over a period of time and in a suitable range of contexts

b

Consistently applies underpinning knowledge and skills when:

1

completing manoeuvring operations

2

identifying and evaluating manoeuvring problems and determining appropriate courses of action

3

identifying and implementing improvements to manoeuvring procedures

4

applying safety precautions relevant to manoeuvring operations

5

assessing operational capability of vessel and manoeuvring power plant and equipment

c

Shows evidence of application of relevant workplace procedures, including:

1

relevant maritime regulations

2

OH&S regulations and hazard prevention policies and procedures

3

job procedures and work instructions

4

relevant manufacturer's guidelines relating to the use of power plant and machinery, including instructions on equipment capability and limitations

5

following on-board housekeeping processes