REQUIRED KNOWLEDGE

This describes the knowledge required for this unit

Relevant OHampS and pollution control legislation and codes of practice

Procedures for the operation and routine servicing of auxiliary systems on a small vessel

Safety environmental and hazard control precautions and procedures relevant to the operation and routine servicing of auxiliary systems on a small vessel

Typical problems related to the during the operation and servicing of auxiliary systems on small vessels and appropriate action and solutions

Principal features and operating characteristics of typical steering systems and steering system components used on small vessels including

a

rudder construction

b

rudder types

c

rudder and stock support bearings

d

e

tiller arm attachment

f

steering operation using hydraulic cable and rod and gear

g

requirements for the servicing and testing of steering and related hydraulic systems

Principal features and operating characteristics of typical pumping systems and pumping system components used on small vessels including

a

fire bilge and tank circulating systems

b

basic fault identification and servicing procedures

c

procedures for the prevention of corrosion in pumping systems

d

e

back flooding prevention procedures

f

strainers mudboxes and footvalves

g

use of flexible materials hoses etc

h

drive systems belts clutches motors etc

Principal features and operating characteristics of typical fuel and fuel oil systems used on small vessels including

a

basic principles of operation of fuel and fuel oil systems

b

hazards when working with fuel and fuel oil systems

c

environmental issues and responsibilities concerning operation and servicing of fuel and fuel oil systems

TDMMRB OPERATE AND MAINTAIN AUXILIARY SYSTEMS ON VESSELS WITHIN THE LIMITS OF RESPONSIBILITY OF A MARINE ENGINE DRIVER GRADE

TDMMR2807B OPERATE AND MAINTAIN AUXILIARY SYSTEMS ON VESSELS WITHIN THE LIMITS OF RESPONSIBILITY OF A MARINE ENGINE DRIVER GRADE 2

Principal features and operating characteristics of typical refrigeration system used on small vessels including

a

basic principles of operation

b

operating functions of component parts

c

start up and shut down procedures

d

e

procedures for starting a system that has not pumped down correctly

f

plant malfunctions and action that can be taken

g

dangers of refrigerant gases and related legislation

h

procedures for adding lubricating oil to a refrigeration compressor

Maritime communication techniques needed during the operation and servicing of auxiliary systems on small vessels

Servicing records that are maintained on a small commercial vessel

REQUIRED SKILLS

This describes the basic skills required for this unit

Use verbal communication skills required when operating and servicing auxiliary systems and equipment

Read interpret and apply operating and service manuals and instructions for auxiliary systems and equipment including all required OHampS procedures and precautions

Read and interpret material safety data sheets

Read and interpret performance readings and indications

Complete any required operational and servicing records

Work safely and collaboratively with others when operating and servicing auxiliary systems and equipment

Select and use relevant tools and equipment as per instructions

Recognise faulty equipment and take appropriate action as per operating instructions

Recognise routine problems when operating and servicing auxiliary systems and equipment and take appropriate action

Adapt to differences in vessels auxiliary systems and equipment and operating and servicing procedures

Operate marine auxiliary systems and equipment on vessels of less than kW propulsion power

TDMMRB OPERATE AND MAINTAIN AUXILIARY SYSTEMS ON VESSELS WITHIN THE LIMITS OF RESPONSIBILITY OF A MARINE ENGINE DRIVER GRADE

TDMMR2807B OPERATE AND MAINTAIN AUXILIARY SYSTEMS ON VESSELS WITHIN THE LIMITS OF RESPONSIBILITY OF A MARINE ENGINE DRIVER GRADE 2

The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria the Range Statement and the Assessment Guidelines for this Training Package

The Evidence Guide provides advice on assessment and must be read in conjunction with the Performance Criteria, , the Range Statement and the Assessment Guidelines for this Training Package.

Critical aspects of evidence required to demonstrate competency in this unit

Assessment must confirm appropriate knowledge and skills to

a

Operate auxiliary systems on a small vessel

b

Carry out servicing and basic repairs of auxiliary systems on a small vessel

c

Identify typical problems related to the servicing of auxiliary systems on a small vessel and take appropriate action

d

e

Communicate effectively with others when operating and carrying out basic servicing on auxiliary systems on a small vessel

Evidence required for demonstration of consistent performance

a

Performance is demonstrated consistently over a period of time and in a suitable range of contexts

b

Consistently applies underpinning knowledge and skills when

operating auxiliary systems on a small commercial vessel

carrying out routine servicing of auxiliary systems on a small vessel

identifying and evaluating routine operational and basic servicing problems and determining appropriate courses of action

applying safety and pollution control precautions

c

Shows evidence of application of relevant workplace procedures including

relevant sections of State and Territory marine regulations NSCV and USL Code

OHampS regulations and hazard prevention policies and procedures

job procedures and work instructions

manufacturers guidelines relating to operating and routine servicing of auxiliary systems on a small vessel

environmental protection procedures when carrying out servicing operations

d

e

Work is completed systematically with required attention to detail

f

Recognises and adapts appropriately to cultural differences in the workplace including modes of behaviour and interactions among crew and others

TDMMRB OPERATE AND MAINTAIN AUXILIARY SYSTEMS ON VESSELS WITHIN THE LIMITS OF RESPONSIBILITY OF A MARINE ENGINE DRIVER GRADE

TDMMR2807B OPERATE AND MAINTAIN AUXILIARY SYSTEMS ON VESSELS WITHIN THE LIMITS OF RESPONSIBILITY OF A MARINE ENGINE DRIVER GRADE 2

Context of assessment

a

Assessment of competency must comply with the assessment requirements of the relevant maritime regulations

b

Assessment of this unit must be undertaken within relevant marine authority approved and audited arrangements by a registered training organisation

As a minimum assessment of knowledge must be conducted through appropriate writtenoral examinations and

Appropriate practical assessment must occur

i

at the registered training organisation andor

ii

on an appropriate working or training vessel

Specific resources required for assessment

Access is required to opportunities to

a

participate in a range of exercises case studies and other simulated practical and knowledge assessments that demonstrate the skills and knowledge to operate and service auxiliary systems on small vessels falling within the limits of responsibility of Marine Engine Driver Grade andor

b

operate and carry out routine servicing on auxiliary systems on an operational small commercial or training vessel within the limits of responsibility of a Marine Engine Driver Grade

VARIABLE

a.

Work must be carried out:

1

b.

Work is performed:

1

c.

Work involves:

1

a

Vessel may include:

1

b

Operation and servicing of auxiliary systems may be conducted:

1

2

3

4

5

6

7

8

c

Auxiliary systems may include:

1

2

3

4

VARIABLE

c

Auxiliary systems may include:

(continued)

5

fuel and fuel oil systems

d

Basic servicing may include:

1

2

3

4

5

6

e

Servicing tools and equipment may include:

1

2

3

4

i

ii

iii

f

Documentation and records may include:

1

2

3

4

5

g

Applicable legislation, regulations and codes may include:

1

2

3

4