Elements and Performance Criteria
- Follow safety requirements
- Operator and third party safety is observed in accordance with organisational/manufacturer and legislative requirements
- Safe work area controls are implemented in accordance with organisational/waste generator requirements
- Vehicle is positioned on stable ground to ensure vehicle safety and stability for loading in accordance with organisational/manufacturer requirements
- Vehicle controls are checked and operated in accordance with organisational/manufacturer requirements
- Appropriate safety items are selected, used and re-stowed in accordance with organisational/manufacturer requirements
- Defective equipment is reported in accordance with organisational/manufacturer requirements
- Load product into vehicle
- Pit and trap lids/hatches are opened and removed in accordance with organisational/waste generator requirements
- Vehicle is checked for readiness to operate in accordance with organisational/manufacturer requirements
- Provided documentation is used to determine collection location
- Product streams are checked before loading, any incorrect product streams are identified and appropriate action is taken in accordance with organisational requirements
- Product stream is transferred into vehicle tank via hoses in accordance with organisational/manufacturer and legislative requirements
- Blockages and non-compliant product are cleared in accordance with organisational/manufacturer and legislative requirements
- Load volumes are monitored to ensure the gross vehicle mass (GVM) is not exceeded, and where required, excess product is unloaded to an approved point
- Hoses and surrounding areas are cleaned and cleared in accordance with organisational/manufacturer requirements
- Hoses are returned to transit position, pit and trap lids/hatches at waste generators premises are put back in place and secured, and vehicle hatches and vents are closed
- Available load capacity is confirmed and appropriate action is taken in accordance with organisational requirements
- Unload product and complete documentation
- Vehicle is positioned for unloading on level, stable ground to ensure vehicle safety and stability in accordance with site, organisational/manufacturer and legislative requirements
- Waste liquid is discharged via vacuum, pressure or gravity feed in accordance with organisational/manufacturer and legislative requirements
- Tanker is cleaned in accordance with organisational/manufacturer requirements
- Return of equipment used to transit position is ensured
- Documentation for unloaded product is completed in accordance with organisational/manufacturer and legislative requirements