Elements and Performance Criteria
- Plan work/task
- Task requirements are identified from work orders or equivalent and confirmed with relevant people and site inspection is conducted in accordance with workplace procedures
- Work area operating surface is assessed to determine the quality of ground suitability for operational use of reach stacker in accordance with workplace procedures
- Reach stacker MRC and Spreader/lifting gear Work Load Limit (WLL)is established for the Container/s and work/task requirements in accordance with manufacturer specifications and workplace procedures
- Appropriate paths for operating the reach stacker and moving and placing container/s in work area are assessed and determined in accordance with workplace procedures
- Relevant hazard identification and risk elimination/control measures are applied and advised to relevant person/s in accordance with workplace procedures
- Traffic management plan implementation is confirmed and understood in accordance with workplace procedures
- Appropriate communication procedures are identified and tested with associated personnel in accordance with workplace procedures
- All tasks are confirmed to ensure requirements for the relevant work area is in accordance with workplace procedures
- Prepare for work/task
- Consultation with workplace personnel is established and maintained to ensure workplan is clear and consistent with site requirements in accordance with workplace procedures
- Risk control measures for hazards identified are checked for implementation in accordance with legislative responsibilities and safe work procedures
- Reach stacker is accessed in a safe manner in accordance with manufacturer specifications and safe work procedures
- Pre-start reach stacker checks are carried out and any damage and defects are reported, recorded and appropriate action is taken in accordance with manufacturer requirements and safe work procedures
- Reach stacker is started and is checked for any abnormal noises/operationin accordance with manufacturer requirements and safe work procedures
- Operational checks are carried out and any damage and defects are reported, recorded and appropriate action is taken in accordance with manufacturer specifications and safe work procedures
- Reach stacker stability requirements for task are determined in accordance with relevant manufacturer specifications and safe work procedures
- Reach Stacker logbook is checked to confirm current compliance, is correct for the reach stacker type, is completed and signed and required rectifications have been signed off in accordance with manufacturer requirements and safe work procedures
- Weather and work environment conditions are assessed to determine any impact on reach stacker operations in accordance with manufacturer requirements and safe work procedures
- Reach stacker is driven to work area and prepared for container operations in accordance with relevant safe work procedures
- Perform work/task
- Container lifts are determined within MRC of the reach stacker in accordance with safe work procedures
- Container spreader is safely positioned over container following directions from associated personnel (if applicable) in accordance with safe work procedures
- Container spreader is latched onto container and reach stacker is stabilised appropriately in accordance with safe work procedures
- Test lift is carried out in accordance with safe work procedures
- Containers are mobiled safely using best mobile practice and relevant reach stacker movements in accordance with safe work procedures
- Container and reach stacker movement is monitored constantly and operated in accordance with safe work procedures and manufacturer specifications
- All required communications signals are correctly interpreted, used and followed whilst reach stacker is operated in accordance with safe work procedures
- Container is lowered and landed safely in accordance with safe work procedures
- Container spreader is disconnected from container and positioned safely and efficiently for next task in accordance with safe work procedures
- Reach stacker boom and container spreader are secured as required in accordance with manufacturer specifications and safe work procedures
- Relevant motion locks and brakes are applied as required in accordance with manufacturer specifications, safe work procedures
- Stabilisers (if fitted) are raised and secured in accordance with manufacturer specifications, safe work procedures
- Reach stacker is parked to avoid hazards and shut down in accordance with safe work procedures
- Post-operational reach stacker checks are carried out in accordance with manufacturer specifications, legislative responsibilities and safe work procedures
- Reach stacker is secured to prevent unauthorised access/use in accordance with legislative obligations, responsibilities, safe work procedures
- Task requirements are identified from work orders or equivalent and confirmed with relevant people and site inspection is conducted in accordance with workplace procedures
- Work area operating surface is assessed to determine the quality of ground suitability for operational use of reach stacker in accordance with workplace procedures
- Reach stacker MRC and Spreader/lifting gear Work Load Limit (WLL)is established for the Container/s and work/task requirements in accordance with manufacturer specifications and workplace procedures
- Appropriate paths for operating the reach stacker and moving and placing container/s in work area are assessed and determined in accordance with workplace procedures
- Relevant hazard identification and risk elimination/control measures are applied and advised to relevant person/s in accordance with workplace procedures
- Traffic management plan implementation is confirmed and understood in accordance with workplace procedures
- Appropriate communication procedures are identified and tested with associated personnel in accordance with workplace procedures
- All tasks are confirmed to ensure requirements for the relevant work area is in accordance with workplace procedures
- Risk control measures for hazards identified are checked for implementation in accordance with legislative responsibilities and safe work procedures
- Reach stacker is accessed in a safe manner in accordance with manufacturer specifications and safe work procedures
- Pre-start reach stacker checks are carried out and any damage and defects are reported, recorded and appropriate action is taken in accordance with manufacturer requirements and safe work procedures
- Reach stacker is started and is checked for any abnormal noises/operationin accordance with manufacturer requirements and safe work procedures
- Operational checks are carried out and any damage and defects are reported, recorded and appropriate action is taken in accordance with manufacturer specifications and safe work procedures
- Reach stacker stability requirements for task are determined in accordance with relevant manufacturer specifications and safe work procedures
- Reach Stacker logbook is checked to confirm current compliance, is correct for the reach stacker type, is completed and signed and required rectifications have been signed off in accordance with manufacturer requirements and safe work procedures
- Weather and work environment conditions are assessed to determine any impact on reach stacker operations in accordance with manufacturer requirements and safe work procedures
- Reach stacker is driven to work area and prepared for container operations in accordance with relevant safe work procedures
- Container spreader is safely positioned over container following directions from associated personnel (if applicable) in accordance with safe work procedures
- Container spreader is latched onto container and reach stacker is stabilised appropriately in accordance with safe work procedures
- Test lift is carried out in accordance with safe work procedures
- Containers are mobiled safely using best mobile practice and relevant reach stacker movements in accordance with safe work procedures
- Container and reach stacker movement is monitored constantly and operated in accordance with safe work procedures and manufacturer specifications
- All required communications signals are correctly interpreted, used and followed whilst reach stacker is operated in accordance with safe work procedures
- Container is lowered and landed safely in accordance with safe work procedures
- Container spreader is disconnected from container and positioned safely and efficiently for next task in accordance with safe work procedures
- Relevant motion locks and brakes are applied as required in accordance with manufacturer specifications, safe work procedures
- Stabilisers (if fitted) are raised and secured in accordance with manufacturer specifications, safe work procedures
- Reach stacker is parked to avoid hazards and shut down in accordance with safe work procedures
- Post-operational reach stacker checks are carried out in accordance with manufacturer specifications, legislative responsibilities and safe work procedures
- Reach stacker is secured to prevent unauthorised access/use in accordance with legislative obligations, responsibilities, safe work procedures