Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Prepare to modify electronic sub-assemblies
   • Work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures for a given work area are identified, obtained and applied
2. WHS/OHS risk control measures for work preparation are followed
3. Scope of rework is determined from documentation or from work supervisor
4. Re-work of sub-assemblies is coordinated with others involved in the work to ensure work schedules are met and safety measures are followed
5. Sources of materials required for work are in accordance with workplace procedures
6. Tools and equipment required for re-work are selected for their effectiveness and checked for correct operation and safety
   • WHS/OHS risk control work measures and procedures are followed
7. Need to inspect, test and measure live work is determined in accordance with WHS/OHS requirements and workplace procedures
8. Circuits are checked and isolated in accordance with WHS/OHS requirements and workplace procedures
9. Components are disconnected and reconnected in accordance with relevant industry and technology of connection methods used
10. Work is carried out in accordance with quality procedures and workplace/industry standards
11. Re-work of sub-assemblies is completed in accordance with timeframes and environment and workplace conditions
12. Check quality of modified sub-assemblies
    • WHS/OHS risk control measures for work completion are followed
13. Quality of re-work is checked in accordance with workplace/industry standards
14. Functional tests on re-worked sub-assemblies are carried out in accordance with workplace procedures
15. Actions are taken to rectify defects within the scope of workplace procedures
16. Report forms/data sheets on re-work of sub-assemblies are completed in accordance with workplace procedures

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the UEE Electrotechnology Companion Volume Implementation Guide.

---

Performance Evidence

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria on at least two separate occasions and include:

adhering to quality procedures applying relevant work health and safety/occupational health and safety (WHS/OHS) requirements, including using risk control measures carrying out functional tests checking and isolating circuits checking quality of modified sub-assemblies completing re-work in acceptable timeframe, environment and workplace conditions completing workplace reports/data sheets disconnecting and reconnecting components determining materials for work following job specifications inspecting, testing and measuring live work modifying sub-assemblies preparing to modify sub-assemblies rectifying defects selecting tools and equipment.

---

Knowledge Evidence

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements and performance criteria and include knowledge of:

quality management system relevant manufacturer specifications and operating instructions relevant materials, tools and equipment relevant job safety assessments or risk mitigation processes relevant WHS/OHS legislated requirements relevant workplace documentation relevant workplace quality, instructions, policies and procedures.

---