Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Prepare to program commercial access control security system
   • WHS/OHS requirements and workplace procedures for a given work area are identified obtained and understood
2. WHS/OHS risk control measures and workplace procedures are followed in preparation for commercial access control security system work
3. Safety hazards not previously identified are risk assessed, documented and risk control measures devised and implemented in consultation with appropriate person/s
4. Extent of programming and commissioning is determined from reports, documentation and from discussions with relevant person/s
5. Appropriate person/s is consulted to ensure commercial access control security system work is coordinated effectively with others involved on the worksite
6. Tools, equipment and testing devices needed to program and commission systems are obtained in accordance with workplace procedures and checked for correct operation and safety
7. Program and commission commercial access control security system
   • WHS/OHS risk control measures and workplace procedures for carrying out commercial access control security system work are followed
8. Need to test and measure live work is determined in accordance with WHS/OHS requirements and, as required, conducted in accordance with workplace safety procedures
9. Circuits/machines/plant are checked and isolated in accordance with WHS/OHS requirements and workplace procedures
10. Security access control instructions and functions are entered into the system in accordance with design specifications
11. Security access control devices are checked for correct location and alignment
12. Security access controls are inspected and tested in accordance with commercial access control security system commissioning requirements
13. Sources of access control anomalies are identified and corrected
14. Unplanned situations are responded to in accordance with workplace procedures, discussions with appropriate person/s and job specifications and requirements in a manner that minimises risk to personnel and equipment
15. Methods for dealing with unplanned situations are selected on the basis of safety and specified work outcomes
16. Programming and commissioning activities are carried out efficiently without waste of materials or damage to apparatus, the surrounding environment or services using sustainable energy practices
17. Complete and report programming and commissioning activities
    • WHS/OHS work completion risk control measures and workplace procedures are followed
18. Worksite is made safe in accordance with workplace safety procedures
19. Access control system operating documentation and explanation of system features is communicated to appropriate person/s
20. ‘As-installed’ security access control system is documented and appropriate person/s notified in accordance with workplace procedures

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the UEE Electrotechnology Training Package Companion Volume Implementation Guide.
Programming and commissioning must include at least the following:	two different commercial security access control systems

---

Performance Evidence

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions on at least two separate occasions and include:

applying relevant work health and safety (WHS)/occupational health and safety (WHS/OHS) requirements, workplace procedures and practices, including using risk control measures applying sustainable energy principles and practices communicating access control system to appropriate person/s dealing with unplanned events/situations in accordance with workplace procedures in a manner that minimises risk to personnel and equipment documenting ‘as-installed’ system correctly entering system functions using relevant information technology identifying and correcting function anomalies testing access control functions.

---

Knowledge Evidence

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions and include knowledge of:

program loading methods, including relevant information technology program testing methods relevant job safety assessments or risk mitigation processes relevant security systems access control manufacturer specifications relevant WHS/OHS legislated requirements relevant workplace documentation relevant workplace policies and procedures security systems access control programming vender programming codes and functions, including: input/output (I/O) instructions variables timers limitations of vender software.

---