Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

  1. Prepare to assemble and enter operating instructions
  2. Hazards are identified, risks assessed and control measures implemented
  3. Safety hazards not previously identified are reported on job safety assessment and advice on risk control measures is sought from supervisor
  4. Supervisor/customers are consulted to determine which functions of the device are used and the parameter of each
  5. Tools, equipment and testing devices needed to carry out the work are obtained and checked for correct operation and safety in accordance with workplace procedures
  6. Device installation is checked for compliance with job specification and regulations where required
  7. Assemble and enter operating instructions
  8. Circuits/machines/plant are checked and isolated in accordance with WHS/OHS requirements and workplace procedures
  9. Required status of each function of the device is entered and their parameters set in accordance with manufacturer programming instructions
  10. Entered data is checked in accordance with specifications stated by work supervisor/customer
  11. Unplanned situations are responded to in accordance with workplace procedures and approval of an authorised person/s
  12. Test device operation and report
  13. Operating anomalies are identified and corrected in accordance with workplace procedures
  14. WHS/OHS work completion risk control measures and workplace procedures are followed
  15. Worksite is cleaned and made safe in accordance with workplace procedures
  16. Work completion is documented and appropriate person/s notified in accordance with workplace procedures

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment.

Non-essential conditions may be found in the UEE Electrotechnology Training Package Companion Volume Implementation Guide.

Assembling, entering and verifying operating instructions must include at least two of the following types of microprocessor equipped devices with inbuilt icon based programmable functions:

programmable relays

timers

temperature controllers

detection devices for security and fire

programmable logic controller (PLC)

Performance Evidence

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions on at least two separate occasions and include:

applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, including:

implementing risk control measures

applying safe working practices

completing required documentation

assembling, entering and verifying operating instructions in basic microprocessor equipped devices

identifying non-compliance conditions of device installation

isolating electrical components in accordance with workplace procedures

correcting programming anomalies

testing, entering functions, verifying device operation parameters correctly and reporting

dealing with unplanned events/situations in accordance with workplace procedures in a manner that minimises risk to personnel and equipment

using required operating functions and parameters.

Knowledge Evidence

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions and include knowledge of:

digital controllers, including:

types

block diagram of controller

applications

terms

controller input and output equipment, including:

input sensors (transducers)

current loop concepts

output current and voltage ratings

supplementary solid-state relays/contactors

installation of microprocessor equipped device/s, including:

types of input sensors

wiring

mounting techniques

terminal types

output current protection

configuration and digital controller set-up, including:

manufacturer's data

testing

microprocessor equipped devices including simple programmable relays, timers, temperature controllers, switches and basic detection devices for security and fire systems

operating instructions in basic microprocessor equipped devices

function

equipment and tools relating to testing of microprocessor equipped devices

relevant workplace documentation

relevant workplace policies and procedures

risk control measures, including safe working practices

techniques for resolving programming anomalies.