Elements and Performance Criteria
- Prepare to assemble and enter operating instructions
- Hazards are identified, risks assessed and control measures implemented
- Safety hazards not previously identified are reported on job safety assessment and advice on risk control measures is sought from supervisor
- Supervisor/customers are consulted to determine which functions of the device are used and the parameter of each
- Tools, equipment and testing devices needed to carry out the work are obtained and checked for correct operation and safety in accordance with workplace procedures
- Device installation is checked for compliance with job specification and regulations where required
- Assemble and enter operating instructions
- Circuits/machines/plant are checked and isolated in accordance with WHS/OHS requirements and workplace procedures
- Required status of each function of the device is entered and their parameters set in accordance with manufacturer programming instructions
- Entered data is checked in accordance with specifications stated by work supervisor/customer
- Unplanned situations are responded to in accordance with workplace procedures and approval of an authorised person/s
- Test device operation and report
- Operating anomalies are identified and corrected in accordance with workplace procedures
- WHS/OHS work completion risk control measures and workplace procedures are followed
- Worksite is cleaned and made safe in accordance with workplace procedures
- Work completion is documented and appropriate person/s notified in accordance with workplace procedures