Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Identifyinstrumentation, control apparatus and associated equipment
   • WHS/OHS requirements and workplace procedures are identified and applied
2. Hazards are identified, risks are assessed and control measures implemented
3. Safety hazards not previously identified are reported on job safety assessment and advice on risk control measures are implemented
4. Installation of apparatus is prepared in consultation with relevant person/s and scheduled
5. Nature and location of work is determined from documentation and/or relevant person/s to determine scope of work
6. Location of instrumentation, control apparatus and associated equipment is planned within constraints of building structure, significants and regulations
7. Advice is sought from relevant person/s to ensure work is coordinated with others in accordance with workplace procedures
8. Materials needed for installation work are obtained in accordance with workplace procedures and checked against job requirements
9. Tools, equipment and testing devices needed for work are obtained in accordance with workplace procedures and checked for correct operation and safety
10. Preparatory work is checked by supervisor to ensure no damage has occurred and work complies with job requirements
11. Install instrumentation, control apparatus and associated equipment
    • WHS/OHS risk control measures and procedures for carrying out the work are followed
12. Need to test or measure live electrical components is determined in accordance with WHS/OHS regulatory requirements and workplace procedures
13. Circuits/machines/plant are checked and isolated in accordance with workplace procedures
14. Instrumentation, control apparatus and associated equipment are installed with sufficient excess to adjust and maintain terminations in accordance with technical standards, manufacturer specifications and job requirements
15. Wiring and tubing is terminated at instrumentation, control apparatus and associated equipment in accordance with manufacturer specifications, functional and regulatory requirements
16. Unplanned situations are discussed with relevant person/s and documented in accordance with workplace procedures
17. Unplanned situations are dealt with safely and with approval of authorised person/s in accordance with workplace procedures
18. Regular quality checks of installed apparatus are undertaken in accordance with workplace procedures
19. Apparatus installation is performed without waste of materials, damage to apparatus, circuits, surrounding environment or services using sustainable energy principles and practices
20. Complete and report installation activities
    • WHS/OHS work completion risk control measures and workplace procedures are followed
21. Worksite is cleaned and made safe in accordance with workplace procedures
22. Final checks are made to installed apparatus to ensure it meets job requirements
23. ‘As-installed’ apparatus and associated equipment are documented and relevant person/s notified in accordance with workplace procedures

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the UEE Electrotechnology Training Package Companion Volume Implementation Guide.
Instrumentation and control apparatus and associated equipment must include at least four of the following:	pressure measurement apparatus and systems temperature measurement apparatus and systems level/density measurement apparatus and systems flow measurement apparatus and systems chemical measurement apparatus and systems

---

Performance Evidence

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions on at least two separate occasions and include:

applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, including implementing risk control measures applying sustainable energy principles and practices checking circuits/machines/plant are isolated cleaning and making safe worksite completing and reporting installation activities dealing with unplanned events/situations in accordance with workplace procedures in a manner that minimises risk to personnel and equipment identifying and installing instrumentation, control apparatus and associated equipment locating and installing instrumentation, control apparatus and associated equipment obtaining relevant materials and checking against job requirements obtaining tools, equipment and testing devices terminating wiring and tubing undertaking regular quality checks in accordance with relevant industry standards.

---

Knowledge Evidence

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions and include knowledge of:

instrumentation and control equipment installation requirements and techniques live electrical components quality checks regulatory requirements, including: equipment specification manufacturer s installation instructions system specifications communication/signal cabling installation requirements power wiring requirements initial set-up procedures relevant job safety assessments or risk mitigation processes, including risk control measures relevant manufacturer specifications relevant WHS/OHS legislated requirements relevant workplace documentation relevant workplace policies and procedures sustainable energy principles and practices wiring and tubing terminations.

---