Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Determine integrated system scenario
   • Customer requirements for scenes, events and controls in an integrated system are determined from job specifications and appropriate person/s
2. Types and locations of integrated system loads are determined from job specifications and customer requirements
3. Types and locations of control (input) devices of integrated system are determined from job specifications and customer requirements
4. Budget for the integrated system is determined from customer and appropriate person/s
5. Plan integrated system
   • Hazards are identified, risks assessed and control measures implemented
6. Integrated system devices and capabilities are incorporated the system plan
7. Number and types of output devices to meet scenario specified are chosen for compatibility with system loads
8. Number and types of control (input) devices to meet system scenario specified are obtained
9. Integrated systems are planned to comply with bus system and supply voltage parameters in accordance with job specifications
10. Other control methods are considered in developing an integrated system plan in accordance with workplace procedures
11. Integrated systems are planned within cost and budget constraints
12. Final plan is documented and submitted to appropriate person/s for approval in accordance with workplace procedures
13. Implement integrated system installation
    • Work health and safety (WHS)/occupational health and safety (OHS) risk control work measures and workplace procedures are followed
14. Integrated system is arranged using appropriate topology in accordance with workplace procedures
15. Connection chart/diagram between devices in the integrated system is developed in accordance with workplace procedures
16. Appropriate cable for the bus system is selected and connected at devices and accessories using the methods and the polarity specified by manufacturer specifications

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the UEE Electrotechnology Training Package Companion Volume Implementation Guide.
Electrical installation of integrated systems must include the following:	three integrated systems one of which has at least four separate scenes and five control requirements
Documentation must include the following:	explanations of how the customer requirement will be achieved a material list with costs and a marked-up floor plan showing relationship of load groups to input device/s

---

Performance Evidence

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions on at least two separate occasions and include:

applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, including implementing risk control measures arranging an integrated system using an acceptable topology complying with a given budget complying with manufacturer instructions/specifications considering other control methods in planning the integrated system dealing with unplanned events/situations in accordance with workplace procedures in a manner that minimises risk to personnel and equipment determining customer requirements for integrated system determining scenario specifications including number and types of control systems developing a connection chart/diagram developing appropriate topology for integrated system documenting integrated system plan identifying integrated system scenario implementing an integrated system installation planning installations of integrated system planning integrated system to comply with bus system and supply voltage parameters

---

Knowledge Evidence

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions and include knowledge of:

acceptable and unacceptable topologies for a single network bus system parameters, including: how bus systems work network topology voltage and current limits cable type and length limits network impedance network and device status indication low voltage (LV) supply, voltage parameters and quality supply sources such as uninterruptable power supplies (UPS) and inverters may adversely effect voltage parameters and waveform cabling, including: insulation resistance testing precautions and prohibitions LV cable terminations and conductor size bus cable polarity and pairing, termination requirements and techniques field and enclosure segregation requirements related to related to relevant industry standards supply and load protection, including: conductors and protection device coordination protection on supply and load side of system devices use of residual current devices (RCDs) output devices, including: relay connections for extra-low voltage (ELV) and LV loads dimmer types supply and load connections for the various dimmer types installation requirements for input devices, including: passive infrared detectors light level control key inputs touch screens acceptable and unacceptable topologies for a single network connection chart/diagrams devices and connections for other control methods, including: distributed signalling interface (DSI) and gateway dimming and control devices and connections digital addressable lighting interface (DALI) dimming and control zero to 10 volts analogue control installation requirements for input devices installations of integrated systems for input devices, including passive infrared detectors, light level control, key inputs, and touch screens job specifications and customer requirements LV supply, voltage parameters and quality, including supply sources such as UPS and inverters which may adversely affect voltage parameters and waveforms manufacturer documentation relevant manufacturer specifications relevant safe work method statements (SWMS)/job safety assessments or risk mitigation processes relevant cabling industry standards, including: cable type and length limits, including network impedance how bus systems work and network topology voltage and current limits relevant WHS/OHS legislated requirements relevant workplace documentation relevant workplace policies and procedures risk control measures supply and load protection acceptable and unacceptable topology requirements for a single network.

---