Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Prepare electronically controlled and robotically operated system
   • Work health and safety (WHS)/occupational health and safety (OHS) processes and workplace procedures for a given work area are identified, obtained and applied
2. Hazards are identified, WHS/OHS risks assessed, and control measures and workplace procedures implemented in preparation for work
3. Scope of work to be undertaken is determined from performance specifications, situation reports and in consultation with relevant person/s
4. Activities are planned to meet scheduled timelines in consultation with person/s involved in the work
5. Strategies are determined and solution developed and implemented in accordance with workplace procedures
6. Set up electronically controlled and robotically operated system
   • WHS/OHS risk control measures and workplace procedures for carrying out the work are followed
7. Controls and integrated robot systems are applied in developing analytical solutions to machine parameters/faults and operation
8. Parameter specifications and performance requirements in relation to each circuit and robot device are obtained in accordance with workplace procedures and relevant industry standards
9. Setting up maintenance and/or modification activity is carried out to provide the most effective solution/s in accordance with workplace procedures
10. Unplanned events are dealt with safely and effectively in accordance with regulatory requirements and workplace policy and procedures
11. Quality of work is monitored in accordance with performance agreement and/or workplace procedures or relevant industry standards
12. Document and report results of system set-up and actions taken
    • Set-up maintenance activity and/or modification is inspected and tested to determine their effectiveness and modified, as required
13. Set-up maintenance activity and/or modification is documented to include details of fault findings, calculations and assumptions
14. Set-up maintenance activity and/or modification is reported to appropriate person/s to determine suitable action/s to be taken based on fault-finding analysis
15. Justification for analysis findings and any actions to be undertaken in relation to the work activity are documented for inclusion in work/project records in accordance with relevant standards and workplace procedures

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the UEE Electrotechnology Training Package Companion Volume Implementation Guide.
Setting up electronically controlled and robotically operated complex systems must include at least two types of machines and include the following:	typical systems encountered in meeting performance requirements and industry standards revising machine operating parameters dealing with machine malfunctions

---

Performance Evidence

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions on at least two separate occasions and include:

applying problem-solving techniques applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements, including: implementing workplace procedures and practices using of risk control measures planning set-up of electronically controlled and robotically operated complex systems documenting and reporting on the results of the set-up and actions taken dealing with unplanned events/situations in accordance with workplace procedures in a manner that minimises risk to personnel and equipment determining strategies for analysing circuit and robot performance effectively documenting instruction for implementing any actions resulting from the analysis that incorporates risk control measure to be followed documenting justification of actions to be implemented in accordance with relevant industry standards and workplace procedures identifying the operation of electronic and robot controls inspecting and testing the results of the analysis obtaining circuit control and robot parameters, specifications and performance requirements appropriate to each situation.

---

Knowledge Evidence

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions and include knowledge of:

electronic interfacing to robotic processes interfacing electronics with robot functions, including: robot types and selection and pre-selection planning robot installation, including pre-installation design, layout and system documentation interfacing of robot controller with other external control systems robot sensor devices, characteristics and application diagnostic functions maintenance scheduling and procedures special features, including safety, palletising and sub-routines relevant job safety assessments or risk mitigation processes relevant manufacturer specifications relevant problem-solving techniques relevant WHS/OHS legislated requirements relevant workplace documentation relevant workplace policies and procedures.

---