Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

  1. Prepare to provide solutions in air traffic control systems
  2. Provide solutions to problems within air traffic control systems
  3. Test and document solutions to problems within air traffic control systems

Required Skills

This describes the essential skills and knowledge and their level required for this unit

Evidence shall show that knowledge has been acquired of safe working practices and providing solutions to air traffic control systems problems

All knowledge and skills detailed in this unit should be contextualised to current industry practices and technologies

KSEHA Air traffic control systems technology

Evidence shall show an understanding of air traffic control systems technology to an extent indicated by the following aspects

T Regulatory bodies encompassing

structure and function of each of the regulatory bodies

International Civil Aviation Organisation ICAO

Australian Transport Safety Bureau ATSB

Civil Aviation Safety Authority CASA

standards and recommended practices issued by the regulatory bodies

relationship between the regulatory bodies and a provider of Air Traffic Services

T Air traffic services encompassing

services provided by Air Traffic Services

objectives of Air Traffic Services

T Air traffic control awareness encompassing

process of maintaining an orderly flow of air traffic

different states of an aircraft flight

need and purpose of flight data regions

enroute airspace and sectors

airspace and sectors around air traffic control facilities

instructions and information exchanged between controllers and pilots

information exchanged between air traffic controllers

T The components of an air traffic control system encompassing

Air Traffic Management ATM Voice Switching and Control VSCS Data and Communications Networks Aeronautical Telecommunications Network AFTN Control Maintenance Monitoring CMM Buildings amp Services

purpose and function of each of the components of an air traffic control system

T Inputs to the air traffic management system ATM encompassing

messages and information received by the ATM system such as surveillance time metrological flight plans and controller input

T Air traffic management ATM system architecture encompassing

the various Hardware Configuration Items HWCI

operating system and other layers of software installed on the ATM system

basic block diagram of the ATM system indicating the network topology data processing subsystem and data presentation processing

requirement for redundancy and the master slave relationship

the different partitions connections and dependencies within the ATM system

functions that can be performed from the Control Maintenance and Monitoring work station

T Outputs from the Air Traffic Management ATM system encompassing

the Operation Display Suites ODS and positions where they are used

block diagram of the display suites indicating peripherals and connections

different aircraft tracks generated by the ATM system

other information shown on an Air Situation Display ASD

requirement for and use of the recording and playback facility

block diagram of the recording and playback facilities showing media devices and connections to the replay position

requirement for and use of the trace collection facility

block diagram of the trace collection facility showing media devices

data and information provided to other systems by the ATM system

T The fallback system for ATM encompassing

purpose of the Ultimate Fallback UFB system

block diagram of UFB indicating peripherals and connections

operating system and application software installed on the UFB computers

information used by UFB

how the information is presented to the air traffic controllers

actions required by an air traffic controller to access UFB system

T Voice switching and control System VSCS encompassing

purpose of the Voice Switching and Control System VSCS

top level block diagram of the VSCS

top level operation and protocols used by the VSCS

various VSCS interfaces and functionality they provide

basic operation of an air to ground communication facility

need for and basic operation of air ground retransmission

requirement for and use of the audio recording and replay facility

block diagram of the audio recording and replay facilities showing the media access devices and connection to the VSCS

functionality provided by the System Management System SMS

T Fallback for the voice switching and control system VSCS encompassing

purpose and functionality provided by the Air Ground Air AGA Bypass facility

purpose and functionality provided by the Ground Ground GG Bypass facility

block diagram of the VSCS and AGA Bypass connections

block diagram of the VSCS and GG Bypass connections

how an air traffic controller would access the AGA or GG Bypass facility if required

T Data and communication networks encompassing

purpose and primary use of the networks used by the air traffic control system

systems and end users of each of the networks

block diagram to show the high level architecture of each of the networks

function of the networking devices used by the networks

technologies and protocols used by the networks

T Aeronautical Fixed Telecommunications Network AFTN encompassing

function of the AFTN

structure and type of message carried by the traditional AFTN

type of messages that can be distributed by more contemporary message systems

services provided by contemporary message systems

basic block diagram of a contemporary message system

T Buildings and services encompassing

building layout and format of an air traffic control centre

building layout and format of an air traffic control tower

services required to support an air traffic control centre

block diagram of the air traffic control centre electrical power system including main power standby generator UPS batteries switching equipment

block diagram of the air traffic control centre airconditioning system including the major components and the primary and secondary loops

basic flow chart to show the interaction between the fire system and other services in the air traffic control centre

physical security requirements of an air traffic control centre

components and operation of the security system used in an air traffic control centre

T Tower situational awareness display TSAD encompassing

need for and functionality provided by the Tower Situational Awareness Display TSAD System

block diagram of a TSAD installation

the source of and the information used by the TSAD system

operating system and application software installed on the TSAD computers

T Aeronautical Reference Data Display and Distribution System ARDDDS encompassing

functionality provided by ARDDDS

block diagram of an ARDDDS installation

information used by the ARDDDS

operating system and application software installed on the ARDDDS computers

T Navigational aids encompassing

purpose and functionality provided the navigational aids

location of navigational aids

basic principle of operation of the navigational aids

Evidence Required

The evidence guide provides advice on assessment and must be read in conjunction with the Performance Criteria Required Skills and Knowledge the Range Statement and the Assessment Guidelines for this Training Package

The Evidence Guide forms an integral part of this unit It must be used in conjunction with all parts of the unit and performed in accordance with the Assessment Guidelines of this Training Package

Overview of Assessment

Longitudinal competency development approaches to assessment such as Profiling require data to be reliably gathered in a form that can be consistently interpreted over time This approach is best utilised in Apprenticeship programs and reduces assessment intervention It is the Industrypreferred model for apprenticeships However where summative or final assessment is used it must include the application of the competency in the normal work environment or at a minimum the application of the competency in a realistically simulated work environment It is recognised that in some circumstances assessment in part or full can occur outside the workplace However it must be in accord with industry and regulatory policy

Methods chosen for a particular assessment will be influenced by various factors These include the extent of the assessment the most effective locations for the assessment activities to take place access to physical resources additional safety measures that may be required and the critical nature of the competencies being assessed

The critical safety nature of working with electricity electrical equipment gas or any other hazardous substancematerial carries risk in deeming a person competent Sources of evidence need to be rich in nature to minimise error in judgment

Activities associated with normal everyday work influence decisions about howhow much the data gathered will contribute to its richness Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practised These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments Sample assessment instruments are included for Assessors in the Assessment Guidelines of this Training Package

Critical aspects of evidence required to demonstrate competency in this unit

Before the critical aspects of evidence are considered all prerequisites shall be met

Evidence for competence in this unit shall be considered holistically Each Element and associated performance criteria shall be demonstrated on at least two occasions in accordance with the Assessment Guidelines UEE Evidence shall also comprise

A representative body of work performance demonstrated within the timeframes typically expected of the discipline work function and industrial environment In particular this shall incorporate evidence that shows a candidate is able to

Implement Occupational Health and Safety workplace procedures and practices including the use of risk control measures as specified in the performance criteria and range statement

Apply sustainable energy principles and practices as specified in the performance criteria and range statement

Demonstrate an understanding of the essential knowledge and associated skills as described in this unit It may be required by some jurisdictions that RTOs provide a percentile graded result for the purpose of regulatory or licensing requirements

Demonstrate an appropriate level of skills enabling employment

Conduct work observing the relevant Anti Discrimination legislation regulations polices and workplace procedures

Demonstrated consistent performance across a representative range of contexts from the prescribed items below

Provide solutions to air traffic control systems problems as described in and including

Understanding the extent of the air traffic control system problem

Obtaining air traffic control systems specifications and performance requirements appropriate to each problem

Testing and solutions to air traffic control system problems

Documenting justification of solutions implemented in accordance with established procedures

Dealing with unplanned events by drawing on essential knowledge and skills to provide appropriate solutions incorporated in a holistic assessment with the above listed items

Note

Successful completion of relevant vendor training may be used to contribute to evidence on which competency is deemed In these cases the alignment of outcomes of vendor training with performance criteria and critical aspects of evidence shall be clearly identified

Context of and specific resources for assessment

This unit should be assessed as it relates to normal work practice using procedures information and resources typical of a workplace This should include

OHS policy and work procedures and instructions

Suitable work environment facilities equipment and materials to undertake actual work as prescribed by this unit

These should be part of the formal learningassessment environment

Note

Where simulation is considered a suitable strategy for assessment conditions must be authentic and as far as possible reproduce and replicate the workplace and be consistent with the approved industry simulation policy

The resources used for assessment should reflect current industry practices in relation to providing solutions to air traffic control systems problems

Method of assessment

This unit shall be assessed by methods given in Volume Part Assessment Guidelines

Note

Competent performance with inherent safe working practices is expected in the industry to which this unit applies This requires that the specified essential knowledge and associated skills are assessed in a structured environment which is primarily intended for learningassessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the essential knowledge and skills described in this unit

Concurrent assessment and relationship with other units

There are no concurrent assessment recommendations for this unit

The critical aspects of occupational health and safety covered in unit UEENEEEA and other discipline specific occupational health and safety units shall be incorporated in relation to this unit

The critical aspects of occupational health and safety covered in unit UEENEEE101A and other discipline specific occupational health and safety units shall be incorporated in relation to this unit.


Range Statement

10) This relates to the unit as a whole providing the range of contexts and conditions to which the performance criteria apply. It allows for different work environments and situations that will affect performance.

This unit shall be demonstrated in relation to providing solutions to at least four air traffic control system problems.

Systems problems could cover Air Traffic Management (ATM), Voice Switching and Control (VSCS), Data and Communications Networks, Aeronautical Fixed Telecommunications Network (AFTN), Control Maintenance Monitoring (CMM), Operational Display Suite (ODS), Air Situation Display (ASD), Tower Situational Awareness Display (TSAD), Aeronautical Reference Data Display and Distribution System (ARDDDS), backup to the above systems, Buildings & Services and Navigational Aids.

Note.

Typical air traffic control systems problems are those encountered in meeting performance requirements and compliance standards, revising control operating parameters and dealing with systems malfunctions.

Generic terms used throughout this Vocational Standard shall be regarded as part of the Range Statement in which competency is demonstrated. The definition of these and other terms that apply are given in Volume 2, Part 2.1.