Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

  1. Prepare to select piping, accessories and associated controls
  2. Develop pipe work arrangements
  3. Select piping, accessories and associated controls
  4. Document piping, accessories and associated controls selections

Required Skills

This describes the essential skills and knowledge and their level required for this unit

Evidence shall show that knowledge has been acquired of safe working practices and selecting refrigerant pipetube accessories and associated controls

All knowledge and skills detailed in this unit should be contextualised to current industry practices and technologies

KSEJA Refrigerant pipetube accessories and associated controls selection

Evidence shall show an understanding of refrigerant pipetube accessories and controls selection for refrigeration and air conditioning installations applying safe working practices and relevant Standards Codes and Regulations to an extent indicated by the following aspects

T Drawings Specifications Regulations amp Codes

Equipment layouts amp drawings

Site drawings

Piping diagrams

Wiring diagrams

Control diagrams

Job specifications

Equipment manufactures specifications amp symbols

SAANZ standards

SAANZ standard symbols

Regulations amp Codes

T Equipment Installation Requirements

Installation Equipment requirements

Standards Codes and Regulations

Installation techniques

Specifications

Manufacturers Specifications

T Refrigerant Piping and Accessories

Equipment location

Piping arrangements

Pipework accessories and location

Mounting methods

Noise and vibration prevention

Pipework mounting and fastening

Insulation

Pipework installation techniques

T Pipe Selection and Sizing

Sizing charts

Correction factors

Equivalent lengths

Pressure drop

Oversized amp undersized pipe

Refrigerant velocity

Oil return

Effect of system capacity

T Refrigerant Liquid Flow Controls

Types

Construction

Operation

Applications

Selection

T Refrigerant Vapour Flow Controls

Types

Construction

Operation

Applications

Selection

T Refrigeration System Controls

Types

Construction

Operation

Applications

Selection

T System Capacity Controls

Methods

Components

Operation

Applications

Evidence Required

The evidence guide provides advice on assessment and must be read in conjunction with the Performance Criteria Required Skills and Knowledge the Range Statement and the Assessment Guidelines for this Training Package

The Evidence Guide forms an integral part of this Unit It must be used in conjunction with all parts of this unit and performed in accordance with the Assessment Guidelines of this Training Package

Overview of Assessment

Longitudinal competency development approaches to assessment such as Profiling require data to be reliably gathered in a form that can be consistently interpreted over time This approach is best utilised in Apprenticeship programs and reduces assessment intervention It is the industrypreferred model for apprenticeships However where summative or final assessment is used it is to include the application of the competency in the normal work environment or at a minimum the application of the competency in a realistically simulated work environment In some circumstances assessment in part or full can occur outside the workplace However it must be in accordance with industry and regulatory policy

Methods chosen for a particular assessment will be influenced by various factors These include the extent of the assessment the most effective locations for the assessment activities to take place access to physical resources additional safety measures that may be required and the critical nature of the competencies being assessed

The critical safety nature of working with electricity electrical equipment gas or any other hazardous substancematerial carries risk in deeming a person competent Sources of evidence need to be rich in nature to minimise error in judgment

Activities associated with normal everyday work influence decisions about howhow much the data gathered will contribute to its richness Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practised These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments Sample assessment instruments are included for Assessors in the Assessment Guidelines of this Training Package

Critical aspects of evidence required to demonstrate competency in this unit

Before the critical aspects of evidence are considered all prerequisites must be met

Evidence for competence in this unit shall be considered holistically Each Element and associated performance criteria shall be demonstrated on at least two occasions in accordance with the Assessment Guidelines UEE Evidence shall also comprise

Evidence for competence in this unit shall be considered holistically. Each Element and associated performance criteria shall be demonstrated on at least two occasions in accordance with the 'Assessment Guidelines - UEE07 '. Evidence shall also comprise:

A representative body of work performance demonstrated within the timeframes typically expected of the discipline work function and industrial environment In particular this shall incorporate evidence that shows a candidate is able to

Implement Occupational Health and Safety workplace procedures and practices including the use of risk control measures as specified in the performance criteria and range statement

Apply sustainable energy principles and practices as specified in the performance criteria and range statement

Demonstrate an understanding of the essential knowledge and associated skills as described in this unit It may be required by some jurisdictions that RTOs provide a percentile graded result for the purpose of regulatory or licensing requirements

Demonstrate an appropriate level of skills enabling employment

Conduct work observing the relevant Anti Discrimination legislation regulations polices and workplace procedures

Demonstrated consistent performance across a representative range of contexts from the prescribed items below

Select refrigerant pipetube accessories and associated controls as described in and including

A

Arranging pipe work to comply with regulatory and functional requirements

B

Selecting appropriate type size and quantity of piping and tubing

C

Selecting refrigeration accessories that meets load requirements

D

Selecting control devices that meet functional and regulatory requirements

E

Documenting pipe work arrangement specification for items selected and reasons for the selections made

F

Dealing with unplanned events by drawing on essential knowledge and skills to provide appropriate solutions incorporated in the holistic assessment with the above listed items

Context of and specific resources for assessment

This unit should be assessed as it relates to normal work practice using procedures information and resources typical of a workplace This should include

OHS policy and work procedures and instructions

Suitable work environment facilities equipment and materials to undertake actual work as prescribed by this unit

These should be part of the formal learningassessment environment

Note

Where simulation is considered a suitable strategy for assessment conditions must be authentic and as far as possible reproduce and replicate the workplace and be consistent with the approved industry simulation policy

Evidence should show demonstrated competency in selecting refrigerant pipetube accessories and associated controls

Method of assessment

This unit shall be assessed by methods given in Volume Part Assessment Guidelines

Note Competent performance with inherent safe working practices is expected in the Industry to which this unit applies This requires assessment in a structured environment which is intended primarily for learningassessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the essential knowledge and skills described in this unit

Note:
Competent performance with inherent safe working practices is expected in the Industry to which this unit applies. This requires assessment in a structured environment which is intended primarily for learning/assessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the essential knowledge and skills described in this unit.

Concurrent assessment and relationship with other units

For optimisation of training and assessment effort competency development in this unit may be arranged concurrently with unit

UEENEEDB

UEENEED001B

Use basic computer applications relevant to a workplace

UEENEEJA

UEENEEJ106A

Install refrigerant pipe work flow controls and accessories

Range Statement

8) This relates to the unit as a whole providing the range of contexts and conditions to which the performance criteria apply. It allows for different work environments and situations that will affect performance.

This unit must be demonstrated in relation to the selection of refrigerant pipe/tube, accessories and associated controls for two different refrigeration systems.

These include the following; refrigerant pipe (quick selection method) and fittings, refrigeration flow controls, isolation/access valves, filter-dryers, sight glasses, accessories, thermostats, pressure controls and humidity controls.

Generic terms used throughout this Vocational Standard shall be regarded as part of the Range Statement in which competency is demonstrated. The definition of these and other terms that apply are given in Volume 2, Part 2.1.