This describes the essential skills and knowledge and their level required for this unit

Evidence must show that knowledge has been acquired of safe working practices and working safely with remote area power supply RAPS systems

All knowledge and skills detailed in this unit should be contextualised to current industry practices and technologies

KSEKA

Remote area power supply safe working practice

Evidence shall show an understanding of RAPS safe working practices to an extent indicated by the following aspects

General safety encompassing

General safety

Risk assessment

Personal protective equipment

OHS procedures

RAPS safety and risk assessment encompassing

Types of hazards in and around remote area power supplies

Note In addition to the safety hazards found in most workplace RAPS systems are likely to have the hazards related to electricity supplied from more than one source rotating machines fuels and oils exhaust fumes and acids and flammable gases from batteries

Measures for dealing with hazards in and around remote area power supplies

Purpose and methods for isolation and deenergisation of power supplies

Correct isolation and deenergisation procedures encompassing

Processes for preventing generator from automatically starting

Isolating photo voltaic arrays

Isolating wind driven generators

Isolating battery

Isolating inverter power sources

Safety signage encompassing

Types of signs

Location

Condition

Suitability

Access to system encompassing

Methods for limiting access to plant areas

Reporting

This provides essential advice for assessment of the unit and must be read in conjunction with the performance criteria and the range statement of the unit and the Training Package Assessment Guidelines

The Evidence Guide forms an integral part of this unit It must be used in conjunction with all parts of this unit and performed in accordance with the Assessment Guidelines of this Training Package

Overview of Assessment

Longitudinal competency development approaches to assessment such as Profiling require data to be reliably gathered in a form that can be consistently interpreted over time This approach is best utilised in Apprenticeship programs and reduces assessment intervention It is the industrypreferred model for apprenticeships However where summative or final assessment is used it is to include the application of the competency in the normal work environment or at a minimum the application of the competency in a realistically simulated work environment In some circumstances assessment in part or full can occur outside the workplace However it must be in accordance with industry and regulatory policy

Methods chosen for a particular assessment will be influenced by various factors These include the extent of the assessment the most effective locations for the assessment activities to take place access to physical resources additional safety measures that may be required and the critical nature of the competencies being assessed

The critical safety issues inherent in working with electricity electrical equipment gas or any other hazardous substancematerial present a challenge for those determining competence Sources of evidence need to be rich in nature to minimise error in judgment

Activities associated with normal everyday work have a bearing on the decision as to how much and how detailed the data gathered will contribute to its richness Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practised These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments Sample assessment instruments are included for Assessors in the Assessment Guidelines of this Training Package

Critical aspects of evidence required to demonstrate competency in this unit

Before the critical aspects of evidence are considered all prerequisites must be met

Evidence for competence in this unit must be considered holistically Each element and associated performance criteria must be demonstrated on at least two occasions in accordance with the Assessment Guidelines UEE Evidence must also comprise

A representative body of work performance demonstrated within the timeframes typically expected of the discipline work function and industrial environment In particular this must incorporate evidence that shows a candidate is able to

Implement Occupational Health and Safety workplace procedures and practices including the use of risk control measures as specified in the performance criteria and range statement

Apply sustainable energy principles and practices as specified in the performance criteria and range statement

Demonstrate an understanding of the essential knowledge and associated skills as described in this unit It may be required by some jurisdictions that RTOs provide a percentile graded result for the purpose of regulatory or licensing requirements

Demonstrate an appropriate level of skills enabling employment

Conduct work observing the relevant Anti Discrimination legislation regulations polices and workplace procedures

Demonstrated consistent performance across a representative range of contexts from the prescribed items below

Work safely with remote area power supply RAPS systems as described in and including

A

Preparing to enter the RAPS system including permission to enter the area and to isolate RAPS equipment

B

Applying work procedures and instructions as they apply to risk control measures

C

Dealing with accidents and emergencies

D

Participating in consultation processes identifying hazards and implementing and monitoring control measures

E

Dealing with unplanned events by drawing on essential knowledge and skills to provide appropriate solutions incorporated in a holistic assessment with the above listed items

Context of and specific resources for assessment

This unit should be assessed as it relates to normal work practice using procedures information and resources typical of a workplace This should include

OHS policy and work procedures and instructions

Suitable work environment facilities equipment and materials to undertake actual work as prescribed by this unit

These should be part of the formal learningassessment environment

Note

Where simulation is considered a suitable strategy for assessment conditions must be authentic and as far as possible reproduce and replicate the workplace and be consistent with the approved industry simulation policy

The resources used for assessment should reflect current industry practices in relation to working safely with remote area power supply RAPS systems

Method of assessment

This unit shall be assessed by methods given in Volume Part Assessment Guidelines

Note

Competent performance with inherent safe working practices is expected in the Industry to which this unit applies This requires assessment in a structured environment which is intended primarily for learningassessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the essential knowledge and skills described in this unit

Concurrent assessment and relationship with other units

For optimisation of training and assessment effort competence development in this unit may be arranged concurrently with other units in a qualification or possible skill clusters in which this unit is included

The critical aspects of occupational health and safety covered in unit UEENEEEA and other discipline specific occupational health and safety units shall be incorporated in relation to this unit

The critical aspects of occupational health and safety covered in unit UEENEEE101A and other discipline specific occupational health and safety units shall be incorporated in relation to this unit.