Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Prepare to enter a RAPS system
   • Hazards/risk control procedures for RAPS systems maintenance are identified and applied
2. System access permit is obtained from relevant person/s
3. Preparation for electrical and non-electrical isolation is completed in accordance with workplace procedures
4. Tools and equipment required for work are checked for safety and correct functionality in accordance with workplace procedures
5. Apply safe working practices in RAPS system area
   • Workplace risk control measures and procedures are applied
6. Safe work practices for RAPS system are applied in accordance with workplace procedures
7. Circuits/machines/system are isolated in accordance with work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures
8. Safe work practices in RAPS system are applied in accordance with workplace procedures
9. Safe working practices are applied minimising waste of materials, energy, damage to apparatus, circuits, the surrounding environment and services
10. Quality checks are conducted in accordance with workplace procedures
11. Follow workplace procedures for hazard identification and risk control in RAPS system areas
    • Risks/hazards are identified, assessed and control measures implemented and monitored through consultation with relevant person/s and the local community
12. Workplace hazards are identified and reported to relevant person/s in accordance with workplace procedures
13. WHS/OHS incident reports are completed in accordance with regulatory requirements and workplace procedures
14. Instructions and training are applied in accordance with workplace procedures

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the UEE Electrotechnology Training Package Companion Volume Implementation Guide.
Working safely with RAPS system must include at least the following:	two different systems incorporating the following: battery bank generator set photovoltaic (PV) array one RAPS system with the addition of a wind generator

---

Performance Evidence

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions on at least one occasion and include:

preparing to enter the remote area power supply (RAPS) system including, permission to enter the area and to isolate RAPS equipment applying work procedures and instructions as they apply to risk control measures dealing with accidents and emergencies participating in consultation processes, identifying hazards and implementing and monitoring control measures dealing with unplanned events applying relevant work health and safety (WHS)/occupational health and safety (OHS) requirements and workplace procedures and practices in RAPS system, including: completing WHS/OHS incident reports conducting RAPS system quality checks obtaining and inspecting tools and equipment and reporting faults preparing for and checking isolation of circuits/machines/systems.

---

Knowledge Evidence

Evidence required to demonstrate competence in this unit must be relevant to and satisfy all of the requirements of the elements, performance criteria and range of conditions and include knowledge of:

RAPS safe working practices, including: general safety encompassing: general safety risk assessment personal protective equipment (PPE) WHS/OHS procedures RAPS safety and risk assessment encompassing: types of hazards in and around RAPS: rotating machines fuels and oils exhaust fumes acids and flammable gases from batteries measures for dealing with hazards in and around RAPS purpose and methods for isolation and de-energisation of power supplies correct isolation and de-energisation procedures encompassing: processes for preventing generator from automatically starting isolating photovoltaic (PV) arrays isolating wind driven generators isolating battery isolating inverter power sources safety signage encompassing: types of signs location condition suitability access to system encompassing: methods for limiting access to plant areas reporting access to RAPS, including: obtaining access permit/s relevant manufacturer specifications relevant workplace documentation, policies and procedures.

---