Elements and Performance Criteria
- Prepare to diagnose and rectify faults
- Risk control measures are applied in accordance with workplace procedures prior to commencing work
- Extent of work to be undertaken is determined from fault/breakdown reports and/or discussions with relevant person/s
- Instructions for coordinating work with others is obtained from relevant person/s and applied
- Materials required for the work are identified and accessed in accordance with workplace procedures
- Tools, equipment and testing devices required to locate faults are obtained in accordance with workplace procedures and checked for correct operation and safety
- Diagnose and rectify faults in RE control systems
- Need to test or measure live electrical work is determined in accordance with WHS/OHS requirements and conducted in accordance with workplace procedures
- Circuits/machines/plant are isolated in accordance with WHS/OHS requirements and workplace procedures
- Safety hazards resulting from the fault or breakdown are documented and risk control measures identified and implemented in consultation with relevant person/s
- Fault finding of RE systems and interconnecting circuits is approached methodically using measured and calculated values of circuit/apparatus parameters
- Circuit/apparatus components are dismantled, as required, and parts stored to protect against loss or damage
- Faulty circuits/components are rechecked and their fault status confirmed
- Materials/replacement parts required to rectify faults are sourced and obtained in accordance with workplace procedures
- Effectiveness of repair is tested in accordance with workplace procedures
- Apparatus is reassembled, tested and prepared for return to service
- Unexpected events are dealt with safely and with approval of authorised person/s
- Fault-finding and repair activities are completed without damage to apparatus, circuits, the surrounding environment and services using sustainable energy practices
- Complete and report fault-finding and repair activities
- Work area is cleaned and made safe in accordance with workplace procedures
- Justification for repairs to apparatus is documented in accordance with workplace procedures
- Work completion is documented and relevant person/s notified in accordance with workplace procedures