Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Prepare to weld polyethylene pipe
   • Job requirements and workplace procedures for the site are discussed with relevant persons
2. Work health and safety (WHS)/occupational health and safety (OHS) workplace procedures and environmental and sustainable measures for the site are identified, obtained and applied
3. Scope of work and responsibilities are confirmed with relevant persons in accordance with job requirements and workplace procedures
4. Pre-start test weld sample is prepared in accordance with workplace procedures
5. Confirm pipe handling and jointing of polyethylene pipe
   • Pipe and materials hazards are identified, risks assessed and control measures prioritised, implemented and monitored in accordance with workplace procedures
6. Equipment, tools and personal protective equipment (PPE) required to carry out the work are identified, obtained and checked for correct operation and safety in accordance with workplace procedures
7. Relevant person/s are consulted to ensure the work is coordinated effectively with others involved
8. Materials, plans, diagrams, drawings and resources required to weld and lay polyethylene gas distribution mains are confirmed, scheduled and obtained in accordance with workplace procedures
9. Unsuitable or damaged materials including improperly stored materials are rejected/rectified and reported in accordance with workplace procedures
10. Safety and emergency response procedures and responsibilities for an incident are checked and confirmed with relevant person/s
11. Site preparation, safety plan, traffic management plan and work schedule are confirmed with relevant person/s in accordance with workplace procedures
12. Construct and weld polyethylene gas distribution mains
    • WHS/OHS and environmental risk control measures, schedule of work and workplace procedures for carrying out work are monitored and followed
13. Materials, tools, equipment and measuring devices required for the work are selected and used correctly and safely in accordance with manufacturer instructions and workplace procedures
14. Hazardous activities are conducted safely in accordance with WHS/OHS workplace procedures and job requirements
15. Welding and laying of polyethylene gas distribution mains are conducted in accordance with relevant industry standards and workplace procedures
16. Materials are prepared, aligned, constrained and jointed in accordance with relevant industry standards and workplace procedures without waste
17. Unplanned incidents/events are referred to relevant persons for directions in accordance with workplace procedures
18. Welds and safety checks of work and testing of pipework is carried out in accordance with industry standards, work instructions and workplace procedures
19. Complete work and relevant documentation
    • WHS/OHS and environmental risk control measures for work completion are followed
20. Work site is rehabilitated, cleaned up and made safe in accordance with workplace procedures
21. Tools, equipment and any surplus resources and materials are cleaned, checked and securely stored in accordance with workplace procedures
22. Relevant person/s are notified of work completion in accordance with workplace procedures
23. Relevant documentation is completed and provided to appropriate person/s in accordance with workplace procedures

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the UEG Gas Industry Training Package Companion Volume Implementation Guide.

---