Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

1. Prepare to conduct a Type A gasappliance relight
   • Instructions for the appliance relight work are obtained and confirmed with relevant person/s and/or stakeholders to determine job requirements and work schedule
2. Job requirements and workplace procedures are obtained and discussed with relevant person/s to confirm the work schedule
3. Hazards are identified, risks are assessed and control measures prioritised, implemented and monitored in accordance with workplace procedures
4. Scope of responsibility under the relevant work permit/authorisation is obtained and confirmed with relevant person/s in accordance with job requirements and workplace procedures
5. Equipment, tools, resources, materials and personal protective equipment (PPE) required to conduct an appliance relight are identified, obtained and checked for correct operation and safety in accordance with workplace procedures and manufacturer instructions
6. Responsibilities for work safety and emergency response procedures at the work site are confirmed with relevant person/s and job requirements
7. Relevant person/s and/or stakeholders are consulted to ensure appliance relight is coordinated effectively with others involved
8. Client issues are referred to relevant person/s in accordance with industry standards and workplace procedures
9. Work site preparation, safety plan and work schedule are confirmed with relevant person/s in accordance with workplace procedures
10. Carry out an installation tightness test and an appliance relight
    • Work health and safety (WHS)/occupational health and safety (OHS) risk control measures, schedule of work and workplace procedures are followed
11. Relevant materials, tools, equipment and testing devices are selected and used correctly and safely in accordance with manufacturer instructions and workplace procedures
12. Appliance relight is undertaken following manufacturer instructions and workplace procedures
13. Work is carried out to the required quality standard, without waste of materials or damage to apparatus, equipment, and the surrounding environment or services using sustainable energy principles
14. Hazard warnings and safety signs are recognised, newly identified hazards and WHS/OHS risks assessed and reported to authorised person/s for directions in accordance with workplace procedures
15. Unplanned events or conditions are referred to relevant person/s for further instructions in accordance with workplace procedures
16. Quality checks of the work are undertaken in accordance with job instructions and workplace procedures
17. Complete work and relevant documentation
    • WHS/OHS risk control measures for work completion are followed
18. Final checks, including visual observation, are performed to ensure work complies with workplace procedures, industry standards and manufacturer instructions
19. Relevant person/s are notified of work completion in accordance with workplace procedures
20. Work area is tidied and made safe in accordance with job instructions and workplace procedures
21. Work completion records and documentation are completed in accordance with job instructions and workplace procedures

Range Statement

Range is restricted to essential operating conditions and any other variables essential to the work environment. Non-essential conditions may be found in the UEG Gas Industry Training Package Companion Volume Implementation Guide.

---