Elements and Performance Criteria
- Prepare SCADA controlled gas flow and pressure equipment and electronic gas measurement equipment
- Work requirements are interpreted from plans, specifications and instructions
- Relevant job requirements and workplace procedures for work activities are discussed with relevant person/s to determine and confirm work schedule and respective responsibilities
- WHS/OHS, environmental and sustainable energy policies and workplace procedures are determined and confirmed
- Hazards are identified, WHS/OHS and risks are assessed, and control measures are prioritised, implemented and monitored in accordance with workplace procedures
- Scope of responsibility under the relevant work permits and/or relevant notification is determined and confirmed to access, isolate/de-energise systems and perform work in accordance with job requirements and workplace procedures
- Equipment, tools and personal protective equipment (PPE) needed to carry out work activities are identified, scheduled, obtained and checked for correct operation and safety
- Appropriate person/s are consulted to ensure work activity is coordinated effectively with person/s involved
- Materials, plans, diagrams, drawings and resources required for work are confirmed, scheduled and obtained in accordance with workplace procedures
- Relevant responsibilities associated with first aid and related workplace safety procedures at the work site are identified, checked and confirmed
- Third-party issues are referred to appropriate person/s in accordance with workplace procedures
- Site preparation, safety plan and work schedule are confirmed in accordance with workplace procedures
- Maintain SCADA controlled gas flow and pressure equipment and electronic gas measurement equipment
- Gas detectors are used to determine work site gas concentration levels and to locate and pinpoint any escaping gas, and supervisor advised immediately if site is unsafe in accordance with workplace procedures
- Appropriate materials, tools, equipment and measuring devices are selected and used safely in accordance with workplace procedures
- Hazardous activities are conducted safely in accordance with given instructions and to requirements
- Work is carried out efficiently, to required industry standard, without waste of materials or damage to apparatus, circuits, and the surrounding environment or services using sustainable energy principles
- Hazard warnings and safety signs are identified and assessed as part of WHS/OHS risks and incident control measures and are reported to authorised person/s for directions in accordance with workplace procedures
- Electrical isolations are scheduled, and local/remote control actuated and communicated in accordance with workplace procedures
- Data on system performance, usage and unplanned events is collected, reviewed and reported in accordance with workplace procedures
- Gas station venting and purging operations are undertaken in accordance with workplace procedures
- Gas flow regulator and meter runs, and components are set up and operated, and system is vented, purged and pressurised in accordance with workplace procedures
- Process variables and set points are taken and required adjustments and repairs are carried out in accordance with workplace procedures
- Actuators are isolated/ de-energised in accordance with manufactures instructions and workplace company procedures
- Procedures for referring non-routine events to the authorised person/s for directions are followed
- Routine work activity quality checks are carried out in accordance with workplace instructions
- Complete SCADA maintenancework and relevant documentation
- Work site is tidied and made safe in accordance with workplace procedures
- Tools, equipment and surplus resources and materials are cleaned, checked and securely stored
- Appropriate person/s are notified of work completion in accordance with workplace procedures
- Work completion documentation is completed accurately and provided to appropriate person/s in accordance with workplace procedures