Google Links
Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge
Elements and Performance Criteria
- Prepare to inspect, test and verify overhead distribution installation
- Job requirements and workplace procedures are identified and communicated with relevant personnel
- Work health and safety (WHS)/occupational health and safety (OHS), environmental and workplace procedures for accessing, testing and verifying overhead distribution installations are obtained and confirmed for the purposes of the work to be performed
- Work is prioritised and sequenced for completion within acceptable timeframes following consultation with relevant personnel and in accordance with workplace procedures
- Hazards are identified, WHS/OHS risks assessed and control measures identified in accordance with workplace procedures
- Relevant work permits are obtained, understood and signed in accordance with workplace procedures
- Plant, equipment, tools and personal protective equipment (PPE) required for work are identified, obtained and confirmed in working order
- Specialist test and measurement equipment for testing and verification of overhead distribution installations are obtained, inspected and confirmed in working order and calibrated in accordance with requirements and workplace procedures
- Worksite is prepared to minimise risk, damage to property, commerce and individuals in accordance with workplace procedures
- Personnel participating in work are fully briefed and responsibilities confirmed in accordance with workplace procedures
- Traffic management plan is confirmed as being applied in accordance with workplace procedures
- Carry out inspection, testing and verification of overhead distribution installation
- Requirements for lifting and/or climbing and/or working at heights and the use of power tools/equipment are followed in accordance with workplace procedures
- Inspection, safe access, testing and verification of overhead distribution installations are completed in agreed timeframes, to quality standards and with a minimum of waste in accordance with workplace procedures
- Overhead distribution installations and associated hardware are visually inspected, positioned, secured and terminated/connected in accordance with workplace procedures
- Energised tests and/or measurements to verify overhead distribution installations are determined in accordance with workplace safety procedures and relevant industry standards, as required
- Overhead distribution installations are checked for suitability and conformance with workplace procedures and relevant electrical network supply industry standards
- Overhead distribution installation protection methods and devices are validated in accordance with workplace procedures and relevant distribution network protection industry standards
- Overhead distribution installation switchgear is validated in accordance with workplace procedures and relevant distribution network protection industry standards
- Overhead distribution installations earthing systems and multiple earth neutral (MEN) system components are verified as correctly installed and conforming to workplace procedures and relevant distribution network industry standards
- Mandatory tests are conducted to verify overhead distribution installation system voltage,phasing, phase rotation, polarity and neutral potentialcomply with relevant industry standards
- Solutions used to solve overhead distribution installation problems are applied in accordance with workplace procedures
- Quality checks of work are undertaken in accordance with workplace procedures
- Report inspection and test findings
- Completed work is checked against work schedule, construction plans and drawings for compliance and anomalies are reported in accordance with workplace procedures
- WHS/OHS and environmental incidents are reported in accordance with workplace procedures, as required
- Worksite is rehabilitated, cleaned up and made safe and in accordance with workplace procedures
- Non-compliance defects are identified, corrected and/or reported in accordance with workplace procedures
- Recommendations for rectifying defects are made in accordance with workplace procedures
- Mandatory documentation is completed in accordance with workplace procedures and relevant industry standards
- Tools, equipment and surplus resources are, where appropriate, cleaned, checked and returned in accordance with workplace procedures
- Relevant work permits are signed off and electrical equipment (network infrastructure) are returned to service in accordance with workplace procedures
- Work records, reports and/or documentation are completed in accordance with workplace procedures
Range Statement