Elements and Performance Criteria
- Prepare/plan to maintain energised DC traction overhead wiring systems
- Works schedule(s), including drawings, plans, requirements, established procedures, and material lists, are obtained, analysed, if necessary, by site inspection and the extent of the preparation of the work determined for planning and coordination.
- Work is prioritised and sequenced for the most efficient and effective outcome following consultation with others for completion within acceptable timeframes, to a quality standard and in accordance with established procedures.
- Risk control measures are identified, prioritised and evaluated against the work schedule.
- Relevant requirements and established procedures for the work are communicated to all personnel and identified for all work sites.
- Hazards are identified, OHS risks assessed and control measures are prioritised, implemented and monitored including emergency exits kept clear, to ensure safe systems of work are followed and according to established procedures.
- Relevant work authority/instructions are secured to coordinate the performance of work according to requirements and/or established procedures.
- Resources including personnel, equipment, tools and personal protective equipment required for the job are identified, scheduled and coordinated and confirmed in a safe and technical working order.
- Clients/Customers are provided with possible solutions and/or options within the scope, acceptable cost and requirements.
- Liaison and communication issues with other/authorised personnel, authorities, clients and land owners are resolved and activities coordinated to carry out work.
- Site is prepared according to the work schedule and to minimise risk and damage to property, commerce, and individuals in accordance with established procedures.
- Personnel participating in the work, including plant operators and contractors, are fully briefed and respective responsibilities coordinated and authorised where applicable in accordance with established procedures.
- Positioning of road signs, barriers and warning devices is planned and coordinated in accordance with requirements.
- Carry out maintenance of energised DC traction overhead wiring systems
- OHS and sustainable energy principles and practices to reduce the incidents of accidents and minimise waste are monitored and actioned in accordance with requirements and/or established procedures.
- First Aid, Rescue and other related work procedures are performed according to requirements and/or established procedures.
- Lifting, climbing, working aloft, and use of tools/equipment, techniques and practices are safely exercised according to requirements.
- Hazard warnings and safety signs are recognised and hazards and assessed OHS risks are reported to the immediate authorised persons for directions according to established procedures.
- Remedial actions are taken to overcome any shortfalls encountered in the work schedule according to requirements and/or established procedures.
- Maintenance of energised direct current traction overhead wiring systems is carried out, in accordance with the work schedule and requirements and/or established procedures.
- Essential knowledge and associated skills are applied in the safe maintenance of energised direct current traction overhead wiring systems to ensure completion in an agreed timeframe and, to quality standards with a minimum of waste according to requirements.
- Solutions to non-routine problems are identified and actioned using acquired essential knowledge and associated skills according to requirements.
- On going checks of quality of the work are undertaken in accordance with requirements and established procedures to ensure a quality like outcome is achieved for the client/customer and to a community/industry standard.
- Complete the maintenance of energised DC traction overhead wiring systems
- Work undertaken is checked against works schedule for conformance with requirements, anomalies reported and solutions identified in accordance with established procedures.
- Accidents and/or injuries are reported and followed up in accordance with requirements/established procedures.
- Work site is rehabilitated, cleaned up and confirmed safe in accordance with established procedures.
- Tools, equipment and any surplus resources and materials are, where appropriate, cleaned, checked and returned to storage in accordance with established procedures.
- Relevant work Authority/Instruction(s) are signed off or returned to client/customer in accordance with requirements.
- Works completion records, reports, as installed /modified drawing(s) and/or documentation and information are confirmed, processed and appropriate personnel notified.