Google Links

Follow the links below to find material targeted to the unit's elements, performance criteria, required skills and knowledge

Elements and Performance Criteria

  1. Plan for the management of HV Distribution and Sub transmission network demand
  2. Carry out the management of HV Distribution and Sub transmission network demand
  3. Complete the management of HV Distribution and Sub transmission network demand

Required Skills

Essential Knowledge and Associated Skills EKAS This describes the essential skills and knowledge and their level required for this unit

Evidence shall show that knowledge has been acquired of managing HV distribution and sub transmission network demand

All knowledge and skills detailed in this unit should be contextualised to current industry practices and technologies

KSTSOA High voltage distribution and subtransmission network demand

KS01-TSO35A High voltage distribution and subtransmission network demand

Evidence shall show an understanding of high voltage distribution and subtransmission network demand to an extent indicated by the following aspects

T Enterprise specific procedures and work practices relating to managing network demand encompassing

Commonwealth StateTerritory and local government legislation supply authority regulations Standards codes and or enterprise requirements applicable to the procedures and work practices relating to managing network demand

Requirements for the use of demand management manuals system diagramsplans and drawings

Identify and interpret enterprise demand management procedures

Techniques in the applying enterprise demand management procedures

T Effective management and communication encompassing

Commonwealth StateTerritory and local government legislation Standards codes supply authority regulations and or enterprise requirements applicable to assisting in effective management and communication

Enterprise operational principles workplace OHS enterprise plan environmental enterprise policies and procedures industrial relations policies and procedures antidiscrimination policies and procedures

Relationship between the management and employees methods used to collate and distributedisseminate information responsibilities of each member of the work team staff development activities and legislation requirements with regard to OHS training methods of addressing barriers such as literacy and cultural differences and provisions relating to OHS issue resolution

Techniques associated with organisational policies and procedures related to human resources relevant awards and certified agreements legislation impacting on people management range of support services and expertise available

Techniques in managing relationships identifying problems methods of conflict resolution methods of consultation communication negotiation and mentoring strategies for positive feedback

Techniques in leadership in achieving enterprise strategic and operational plans

Techniques in managing relationships under stress stress management

T Methodology used in writing enterprise specific management reports encompassing

Commonwealth StateTerritory and local government legislation supply authority regulations Standards codes and or enterprise requirements applicable to the writing enterprise specific management reports

Techniques in researching collating and analysing information for the report recording filing retrieving systems storing and retrieving data from computer systems

Relationship of management reports to enterprise policies and procedures enterprise structure and resources workplace OHS and risk management enterprise data financial and operational data environmental enterprise policies and procedures industrial relations policies and procedures antidiscrimination policies and procedures

Techniques in writing enterprise specific management reports methods used to disseminate information and facilitate enterprise requirements document proformas and compliance and legislative requirements to produce effective reports in the appropriate format

Evidence Required

This provides essential advice for assessment of the competency standard unit and must be read in conjunction with the Performance Criteria and the Range Statement of the competency standard unit and the Training Package Assessment Guidelines

The Evidence Guide forms an integral part of this Competency Standard Unit and shall be used in conjunction with all component parts of this unit and performed in accordance with the Assessment Guidelines of this Training Package

Overview of Assessment

Longitudinal competency development approaches to assessment such as Profiling require data to be reliably gathered in a form that can be consistently interpreted over time This approach is best utilised in Apprenticeship programs and reduces assessment intervention It is the Industrys preferred model for apprenticeships However where summative or final assessment is used it is to include the application of the competency in the normal work environment or at a minimum the application of the competency in a realistically simulated work environment It is recognised that in some circumstances assessment in part or full can occur outside the workplace However it must be in accord with Industry and Regulatory policy in this regard

Methods chosen for a particular assessment will be influenced by various factors These include the extent of the assessment the most effective locations for the assessment activities to take place access to physical resources additional safety measures that may be required and the critical nature of the competencies being assessed

The critical safety nature of working with electricity electrical equipment gas or any other hazardous substancematerial carries risk in deeming a person competent Hence sources of evidence need to be rich in nature so as to minimise error in judgment

Activities associated with normal every day work have a bearing on the decision as to how much and how detailed the data gathered will contribute to its richness Some skills are more critical to safety and operational requirements while the same skills may be more or less frequently practiced These points are raised for the assessors to consider when choosing an assessment method and developing assessment instruments Sample assessment instruments are included for Assessors in the Assessment Guidelines of this Training Package

Critical aspects of evidence required to demonstrate competency in this unit

Before the critical aspects of evidence are considered all prerequisites shall be met

Evidence for competence in this unit shall be considered holistically Each Element and associated Performance Criteria shall be demonstrated on at least two occasions in accordance with the Assessment Guidelines UET Evidence shall also comprise

A representative body of Performance Criteria demonstrated within the timeframes typically expected of the discipline work function and industrial environment In particular this shall incorporate evidence that shows a candidate is able to

Implement Occupational Health and Safety workplace procedures and practices including the use of risk control measures as specified in the Performance Criteria and range and

Apply sustainable energy principles and practices as specified in the Performance Criteria and range and

Demonstrate an understanding of the essential knowledge and associated skills described in this unit to such an extent that the learners performance outcome is reported in accordance with the preferred approach namely a percentile graded result where required by the regulated environment and

Demonstrate an appropriate level of employability skills and

Conduct work observing the relevant Anti Discrimination legislation regulations policies and workplace procedures and

Demonstrated performance across a representative range of contexts from the prescribed items below

Range of toolsequipmentmaterialsproceduresworkplacesother variables

Group No

The minimum number of items on which skill is to be demonstrated

Item List

A

Demonstrate at least three system manipulations that encompass the following

HV Sub transmission distribution network

Transmission network manipulation to control loading on equipment

Transformers with HV windings

HV Busbars

HV Isolators

HV Switchgear applicable to enterprise equipment

B

Do all of the following

Manage multiple switching instructions

Coordinate the status of access permitsauthorities on HV network equipment

Ensure network plant operates within design and regulatory requirements on a real time basis

Calculation of line loading

Preparation and authorisation of HV distribution switching programs

Demonstrate application of SCADA or equivalent

Analysis diagnosis and reporting of system failure

Calculation and analysis of paralleling conditions on the interconnected HV system as applicable to the entity

C

Prepare write and check switching sheets to undertake all of the following

Manage load

Manage Voltage

Minimise loss

Maximise system reliability

Allow safe network access for maintenance activities

Allow safe network access for construction activities

Validating fault reports arising from system disturbances

D

At least one occasion

Dealing with an unplanned event by drawing on essential knowledge and associated skills to provide appropriate solutions incorporated in the holistic assessment with the above listed items

Context of and specific resources for assessment

This unit should be assessed as it relates to normal work practice using procedures information and resources typical of a workplace This should include

OHS policy and work procedures and instructions

Suitable work environment facilities equipment and materials to undertake actual management of HV Distribution and Sub transmission network demand

Note

Access will be needed to relevant protection control metering and alarm equipment network drawings computerised electrical plant control and monitoring facilities operational event data enterprise operational policies procedures and work practices and enterprise crisis management procedures

In addition to the resources listed above in Context of and specific resources for assessment evidence should show demonstrated competency working in realistic environment and a variety of conditions

Method of assessment

This Competency Standard Unit shall be assessed by methods given in Volume Part Assessment Guidelines

Note

Competent performance with inherent safe working practices is expected in the Transmission Distribution and Rail Traction Industry This requires that the specified essential knowledge and associated skills are assessed in a structured environment which is primarily intended for learningassessment and incorporates all necessary equipment and facilities for learners to develop and demonstrate the essential knowledge and associated skills described in this unit

Concurrent assessment and relationship with other units

There are no concurrent assessment recommendations for this unit


Range Statement

10) This relates to the competency standard unit as a whole providing the range of contexts and conditions to which the Performance Criteria apply. It allows for different work environments and situations that will affect performance.

This Competency Standard Unit shall be demonstrated in relation to the management of a HV components with due regard to the loadings and prevailing network and shall be demonstrated using the following:

HV Distribution feeders/distribution network; transformers or regulators with HV windings; HV busbars; HV isolators; HV Switchgear (applicable to enterprise equipment); switching instructions (applicable to enterprise equipment); computers (applicable to enterprise equipment); network diagrams (applicable to enterprise equipment)

The following constants and variables included in the Element/Performance Criteria in this unit are fully described in the Definitions Section 1 of this volume and form an integral part of the Range Statement of this unit:

Appropriate and relevant persons (see Personnel)

Appropriate authorities

Appropriate work platform

Assessing risk

Assessment

Authorisation

Confined space

Diagnostic, testing and restoration

Documenting detail work events, record keeping and or storage of information

Drawings and specifications

Emergency

Environmental and sustainable energy procedures

Environmental legislation

Environmental management documentation

Established procedures

Fall prevention

Hazards

Identifying hazards

Inspect

Legislation

MSDS

Notification.

OHS practices

OHS issues

Permits and/or permits to work

Personnel

Quality assurance systems

Requirements

Testing procedures

Work clearance systems