Subjects
Total number of units = 16
9 core plus
7 electives units
The elective units consist of:
1 elective unit selected from Group A Workplace elective units
up to 6 elective units selected from Group B Specialised elective units and/or Group C General elective units, with no more than 2 units selected from the Work health and safety sub-group
up to 2 of units of competency may be selected from any currently endorsed Training Package or accredited course at AQF Level 3 or 4.
Elective units must be relevant to the work environment and the qualification, maintain the integrity of the Australian Qualifications Framework (AQF) alignment and contribute to a valid, industry-supported vocational outcome.
Units selected from other Training Packages or accredited courses must not duplicate units selected from, or available within, the ICT Information and Communications Technology Training Package.
CORE UNITS
ICTCBL237 Install, maintain and modify customer premises communications cabling: ACMA Open Rule*
ICTCBL236 Install, maintain and modify customer premises communications cabling: ACMA Restricted Rule*
ICTDRE303 Install a complex digital reception system
ICTRFN201 Install a satellite antenna
ICTRFN202 Install a terrestrial antenna
ICTTEN201 Use electrical skills in telecommunications work
ICTTEN202 Use hand and power tools
ICTWHS204 Follow work health and safety and environmental policy and procedures
ICTWOR201 Work effectively in telecommunications technology
Elective Units
Group A - Workplace elective units
BSBCUS201 Deliver a service to customers
BSBSMB305 Comply with regulatory, taxation and insurance requirements for the micro business
BSBSMB306 Plan a home based business
BSBSUS401 Implement and monitor environmentally sustainable work practices
ICTSAS305 Provide ICT advice to clients
ICTSMB401 Set up and operate a contractor business
Group B - Specialised elective units
Cabling
ICTCBL206 Alter services to existing cable systems
ICTCBL219 Apply safe technical work practices for cabling registration when configuring an ADSL circuit
ICTCBL220 Install a cable lead-in
ICTCBL301 Install, terminate and certify structured cabling installation
ICTCBL303 Install and terminate coaxial cable
ICTCBL306 Locate and identify cable system faults
Broadband and wireless networks
ICTBWN301 Perform tests on optical communication system and components
ICTBWN305 Use optical and radio frequency measuring instruments
Digital reception technology
ICTDRE301 Install digital reception equipment
ICTDRE302 Locate and rectify digital reception equipment faults
ICTDRE304 Design communications wiring systems for customer premises
ICTDRE305 Develop integrated digital reception systems
ICTDRE401 Integrate customer digital reception equipment
ICTDRE402 Integrate data delivery modes
ICTTEN415 Install and configure internet protocol TV in a home network
ICT use
ICTICT302 Install and optimise operating system software
ICTICT303 Connect internal hardware components
ICTNWK301 Provide network systems administration
Work health and safety
CPCCOHS1001A Work safely in the construction industry
CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry (Note: CPCCOHS2001A is a prerequisite unit for CPCCCM2007B . It is not to be selected without CPCCCM2007B .)
ICTWHS201 Provide telecommunications services safely on roofs or RIIWHS204D Work safely at heights
ICTWHS203 Work safely near power infrastructure
Radio frequency networks
ICTRFN401 Conduct radio frequency measurements
Group C - General elective units
CPCCCM2007B Use explosive power tools*
CPCCDE3014A Remove non-friable asbestos*
RIIHAN301D Operate elevating work platform
TLID2010A Operate a forklift
TLID3035A Operate a boom type elevating work platform
*Note the following prerequisite unit requirements:
Unit in this qualification | Prerequisite unit |
ICTCBL236 Install, maintain and modify customer premises communications cabling: ACMA Restricted Rule | ICTWHS204 Follow work health and safety and environmental policy and procedures ICTTEN201 Use electrical skills in telecommunications work |
ICTCBL237 Install, maintain and modify customer premises communications cabling: ACMA Open Rule | ICTCBL236 Install, maintain and modify customer premises communications cabling: ACMA Restricted Rule |
CPCCCM2007B Use explosive power tools | CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry |
CPCCDE3014A Remove non-friable asbestos | CPCCOHS1001A Work safely in the construction industry |