Diploma of Engineering - Technical
Not Applicable
Subjects
The minimum requirements for achievement of the Diploma of Engineering - Technical are:
completion of the five core units of competency listed below, and
15 Group A and Group B elective units, to bring the total number of units to 20.
Elective units must be selected as follows:
up to eight general elective units from the list in Group A,
at least seven specialist elective units from Group B, to bring the total number of elective units to 15
Three appropriate Group B electives may be chosen from other endorsed Training Packages and accredited courses where those units are available for inclusion at Diploma. Note that the elective units listed below include all of the units that are approved for selection from the MEM Training Package for use in this qualification. This meets the NQC requirement that one sixth of the total units must be able to be selected from other qualifications in the same Training Package.
Note that when selecting elective units any prerequisite units must also be completed and count towards the required number of elective units (refer to units and prerequisites listing in Appendix 2, Volume 1).
Additional qualification descriptors
The following additional descriptors are approved for use with this qualification: Mechanical, Mechatronics, Manufacturing, Maintenance.
Core units
select all of the units from this list
Unit code | Unit title |
Organise and communicate information | |
Interact with computing technology | |
Select common engineering materials | |
Apply mathematical techniques in a manufacturing, engineering or related environment | |
Participate in environmentally sustainable work practices |
Electives units
Group A - general electives
select up to eight units from this list
Unit code | Unit title |
Perform computations | |
Work safely with ionising radiation | |
Perform basic statistical quality control | |
Use hand tools | |
Perform basic penetrant testing | |
Perform basic magnetic particle testing | |
Perform basic eddy current testing | |
Perform ultrasonic thickness testing | |
Perform basic radiographic testing | |
Use computer aided drafting systems to produce basic engineering drawings | |
Produce basic engineering graphics | |
Produce detailed engineering drawings | |
Use CAD to create and display 3D models | |
Calculate force systems within simple beam structures | |
Calculate stresses in simple structures | |
Apply basic economic and ergonomic concepts to evaluate engineering applications | |
Contribute to the design of basic mechanical systems | |
Set up basic hydraulic circuits | |
Set up basic pneumatic circuits | |
Assist in the preparation of a basic workplace layout | |
Apply basic just in time systems to the reduction of waste | |
Develop recommendations for basic set up time improvements | |
Assist in the analysis of a supply chain | |
Use basic preventative maintenance techniques and tools | |
Undertake basic process planning | |
Use resource planning software systems in manufacturing | |
Develop and manage a plan for a simple manufacturing related project | |
Prepare a simple production schedule | |
Undertake supervised procurement activities | |
Prepare a simple cost estimate for a manufactured product | |
Participate in quality assurance techniques | |
Analyse a simple electrical system circuit | |
Select and test components for simple electronic switching and timing circuits | |
Prepare basic programs for programmable logic controllers | |
Assist in sales of technical products/systems | |
Implement and monitor environmentally sustainable work practices | |
Prerequisites: | Where a unit has prerequisites then those prerequisite units can only be used in the count towards the total number of units where they are listed in the table above. |
Group B - specialist electives
select at least seven units from this list to bring the total number of elective units to fifteen
Unit code | Unit title |
Represent mechanical engineering designs | |
Represent mechatronic engineering designs | |
Perform electrical/electronic detail drafting | |
Perform basic engineering detail drafting | |
Calibrate measuring equipment | |
Program coordinate measuring machine (advanced) | |
Use graphical techniques and perform simple statistical computations | |
Supervise occupational health and safety in an industrial work environment | |
Schedule material deliveries | |
Undertake basic process planning | |
Undertake basic production scheduling | |
Apply mechanical engineering fundamentals to support design and development of projects | |
Apply mechatronics fundamentals to support design and development of engineering projects | |
Conduct product and/or process capability studies | |
Perform advanced statistical quality control | |
Perform laboratory procedures | |
Exercise external quality assurance | |
Maintain/supervise application of quality procedures | |
Analyse plant/equipment condition monitoring results | |
Manage self in the engineering environment | |
Source and estimate materials | |
Manage technical sales and promotion | |
Apply advanced mathematical techniques in a manufacturing engineering or related environment | |
Apply calculus in engineering situations | |
Operate and program computers and/or controllers in engineering situations | |
Apply basic scientific principles and techniques in mechanical engineering situations | |
Apply basic electro and control scientific principles and techniques in mechanical and manufacturing engineering situations | |
Select and test mechanical engineering materials | |
Select and test mechatronic engineering materials | |
Select and apply mechanical engineering methods, processes and construction techniques | |
Select and apply mechatronic engineering methods, processes and construction techniques | |
Perform penetrant testing | |
Perform magnetic particle testing | |
Perform eddy current testing | |
Perform ultrasonic testing | |
Perform radiographic testing | |
Establish non destructive tests | |
Apply metallurgy principles | |
Analyse and map a value chain | |
Manage a value chain | |
Develop manufacturing related business plans | |
Manage relationships with non-customer external organisations | |
Manage people relationships | |
Manage workplace learning | |
Apply cost factors to work practices | |
Use planning software systems in manufacturing | |
Use SCADA systems in manufacturing | |
Develop quick changeover procedures | |
Develop a Just in Time (JIT) system | |
Optimise cost of product | |
Undertake value analysis of product costs in terms of customer requirements | |
Manage 5S system in a manufacturing environment | |
Determine and improve process capability | |
Develop the application of enterprise systems in manufacturing | |
Determine and establish information collection requirements and processes | |
Develop and manage sustainable energy practices | |
Develop and manage sustainable environmental practices | |
Facilitate the development of a new product | |
Develop a proactive maintenance strategy | |
Develop a competitive manufacturing system | |
Undertake root cause analysis | |
Implement a competitive manufacturing system | |
Ensure process improvements are sustained | |
Lead change in a manufacturing environment | |
Facilitate a Just in Time (JIT) system | |
Improve cost factors in work practices | |
Analyse manual handling processes | |
Lead 5S in a manufacturing environment | |
Undertake process capability improvements | |
Mistake proof a production process | |
Apply statistics to processes in manufacturing | |
Facilitate the use of planning software systems in manufacturing | |
Facilitate SCADA systems in a manufacturing team or work area | |
Undertake proactive maintenance analyses | |
Assist in implementing a proactive maintenance strategy | |
Prerequisites: | Where a unit has prerequisites then those prerequisite units can only be used in the count towards the total number of units where they are listed in the table above. |
In addition to the above, the minimum requirements for this qualification can also be met by holders of the MEM30505 Certificate III in Engineering -Technical or equivalent subject to the completion of the specified Core units of competency as well as the additional elective units drawn from Group B.
Pathways...
Not Applicable
Entry Requirements
Not Applicable
Licensing Information
Not Applicable
Employability Skills
QUALIFICATION SUMMARY | |
Employability Skill | Industry/enterprise requirements for this qualification include: |
Communication | Read, interpret and analyse information on specifications, design briefs, charts, lists, drawings and other applicable reference documents Research, organise, analyse and communicate complex information from reference texts, manufacturer's catalogues and industrial magazines, websites, use of phone, email and fax Communicate effectively across a range of communication networks in the workplace, including attending meetings and facilitating small group discussions and meetings on relevant engineering and trade related issues, writing memos or letters, making telephone calls Produce, interpret and analyse engineering drawings, charts and graphs Prepare and disseminate verbal or written technical information, instructions, work plans, reports, specifications and other documentation Identify, access, interpret and analyse trade related information in an enterprise, including quality documentation, equipment manufacturer specifications, engineering data sheets, production and maintenance records and national standards. Use engineering terminology and language appropriate to the situation and target audience Write technical or non-technical reports that include some level of analysis and/or research |
Teamwork | Work alone or as part of a team that may include apprentices, other tradespersons, technicians, engineers and production personnel Provide clear and precise information to team members Delegate and supervise work where appropriate |
Problem-solving | Analyse information and data from operations, processes, and test results including determining trends from graphical data Develop solutions and recommendations to trade related problems based on analysis of data Apply mathematical techniques and scientific principles to engineering situations (Including arithmetic, algebraic expressions with one independent variable, two-dimensional geometry, trigonometry, linear functions, basic quadratic functions, basic statistical methods and statistical process control) Perform hazard and risk analysis |
Initiative and enterprise | Be capable of applying trade related skills and knowledgein new and different situations and contexts Apply statistical processes to make recommendations solutions for equipment and and process improvements or to improve sustainabity of operations Make modifications to work plans and schedules to overcome unforeseen difficulties or developments Initiate significant modifications to plant and equipment that lead to desired changes in performance |
Planning and organising | Organise, sort, categorise and sequence information Select and use planning techniques and tools to plan, sequence and prioritise work operations Prepare, monitor and review work plans, schedules, programs and budgets |
Self-management | Carry out work within given timeframe, process and quality constraints Carry out work safely and in accordance with company policy and procedures and legislative requirements Monitor work to ensure compliance with legislation, codes and national standards |
Learning | Use manuals, online help and other reference materials as required to research technical information and data suitable and appropriate for advanced trade and technician applications Identify and consult appropriate personnel and technical experts or other reference sources to obtain/verify information Provide and communicate information to other team members Provide on the job training and monitor trainee progress Maintain knowledge of relevant legislative requirements, codes and standards. |
Technology | Use computing technology to access, input and store information Apply engineering knowledge and principles Search computer databases and internet for technical information and data suitable and appropriate for advanced trade applications Inspect engineering plant, equipment and systems for optimum operation and undertake modifications as required |