MEM50211 - Diploma of Engineering

The minimum requirements for achievement of the Diploma of Engineering - Technical are:

completion of the five (5) core units of competency listed below, and

fifteen (15) elective units, to bring the total number of units to twenty (20).

Elective units must be selected as follows:

up to eight (8) general elective units from the list in Group A,

at least seven (7) specialist elective units from Group B, to bring the total number of elective units to fifteen (15).

Three (3) appropriate Group B electives may be chosen from other endorsed Training Packages and accredited courses where those units are available for inclusion at Diploma level. Note that the elective units listed below include all of the units that are approved for selection from the MEM05 Training Package for use in this qualification. This meets the NQC requirement that one sixth of the total units must be able to be selected from other qualifications in the same Training Package.

Note that when selecting elective units any prerequisite units must also be completed. Note that prerequisites can only count towards the number of electives required if they are listed in the groups below (refer to units and prerequisites listing in Appendix 2).

Additional qualification descriptors

The following additional descriptors are approved for use with this qualification: Mechanical, Mechatronics, Manufacturing, Maintenance, Aeronautical, Avionic.

Core units

Select all of the units from this list.

Unit code	Unit title
MEM16006A	Organise and communicate information
MEM16008A	Interact with computing technology
MEM30007A	Select common engineering materials
MEM30012A	Apply mathematical techniques in a manufacturing, engineering or related environment
MSAENV272B	Participate in environmentally sustainable work practices

Electives units

Group A - general electives

Select up to eight (8) units from this list.

Unit code	Unit title	Prerequisites
MEM09002B	Interpret technical drawing
MEM09202A	Produce freehand sketches
MEM09203A	Measure and sketch site information
MEM09204A	Produce basic engineering detail drawings	*
MEM09205A	Produce electrical schematic drawings	*
MEM09206A	Produce drawings for mechanical services	*
MEM09207A	Produce drawings for reticulated services	*
MEM09208A	Detail fasteners and locking devices in mechanical drawings	*
MEM09209A	Detail bearings, seals and other componentry in mechanical drawings	*
MEM09211A	Produce drawings or models for industrial piping	*
MEM09212A	Produce detailed drawings of steel to non-steel connections	*
MEM09213A	Produce schematic drawings for hydraulic and pneumatic fluid power systems	*
MEM09216A	Interpret and produce curved 3-D shapes and patterns
MEM09217A	Prepare plans for pipe and duct fabrication	*
MEM09218A	Participate in drafting projects for building services	*
MEM09219A	Prepare drawings for fabricated sheet metal products	*
MEM12024A	Perform computations
MEM13013B	Work safely with ionizing radiation
MEM15001B	Perform basic statistical quality control
MEM16003B	Provide advanced customer service
MEM16012A	Interpret technical specifications and manuals
MEM16014A	Report technical information
MEM18001C	Use hand tools
MEM24001B	Perform basic penetrant testing	*
MEM24003B	Perform basic magnetic particle testing	*
MEM24005B	Perform basic eddy current testing	*
MEM24007B	Perform ultrasonic thickness testing	*
MEM24009B	Perform basic radiographic testing	*
MEM30005A	Calculate force systems within simple beam structures	*
MEM30006A	Calculate stresses in simple structures	*
MEM30008A	Apply basic economic and ergonomic concepts to evaluate engineering applications
MEM30009A	Contribute to the design of basic mechanical systems	*
MEM30010A	Set up basic hydraulic circuits
MEM30011A	Set up basic pneumatic circuits
MEM30013A	Assist in the preparation of a basic workplace layout
MEM30014A	Apply basic just in time systems to the reduction of waste
MEM30015A	Develop recommendations for basic set up time improvements
MEM30016A	Assist in the analysis of a supply chain
MEM30017A	Use basic preventative maintenance techniques and tools
MEM30018A	Undertake basic process planning
MEM30019A	Use resource planning software systems in manufacturing
MEM30020A	Develop and manage a plan for a simple manufacturing related project
MEM30021A	Prepare a simple production schedule
MEM30022A	Undertake supervised procurement activities
MEM30023A	Prepare a simple cost estimate for a manufactured product
MEM30024A	Participate in quality assurance techniques	*
MEM30025A	Analyse a simple electrical system circuit	*
MEM30026A	Select and test components for simple electronic switching and timing circuits	*
MEM30027A	Prepare basic programs for programmable logic controllers
MEM30028A	Assist in sales of technical products/systems
MEM30031A	Operate computer-aided design (CAD) system to produce basic drawing elements
MEM30032A	Produce basic engineering drawings
MEM30033A	Use computer-aided design (CAD) to create and display 3-D models	*
CPCCOHS1001A	Work safely in the construction industry
MEA101B	Interpret occupational health and safety practices in aviation maintenance
MEA105C	Apply quality standards applicable to aviation maintenance processes	*
MEA107B	Interpret and use aviation maintenance industry manuals and specifications
MEA108B	Complete aviation maintenance industry documentation	*
MEA109B	Perform basic hand skills, standard trade practices and fundamentals in aviation maintenance	*
MEA270A	Lay out avionic systems	*
MEA271A	Lay out avionic flight management systems	*
MEA340A	Lay out and set up aircraft systems	*
MEA341A	Apply basic aircraft design characteristics	*
MSAENV472B	Implement and monitor environmentally sustainable work practices
MSATCS301A	Interpret architectural and engineering design specifications for structural steel detailing	*
MSATCS302A	Detail bolts and welds for structural steelwork connections	*
UEPMNT419A	Perform Civil Drafting
Prerequisites:	Where a unit has prerequisites then those prerequisite units can only be used in the count towards the total number of units where they are listed in the table above.

Group B - specialist electives

Select at least seven (7) units from this list to bring the total number of elective units to fifteen (15).

Unit code

Unit title

Prerequisites

add topic MEM09011B

Apply basic engineering design concepts

add topic MEM09210A

Create 3-D solid models using computer-aided design (CAD) system

add topic MEM09214A

Perform advanced engineering detail drafting

add topic MEM09215A

Manage detail drafting projects

add topic MEM09220A

Apply surface modelling techniques to 3-D drawings

add topic MEM09221A

Create 3-D model assemblies using computer-aided design (CAD) system

add topic MEM09222A

Interpret and maintain or restore original drawings

add topic MEM09141A

Represent mechanical engineering designs

add topic MEM09142A

Represent mechatronic engineering designs

add topic MEM09143A

Represent aeronautical engineering designs

add topic MEM09144A

Represent avionic engineering designs

add topic MEM12005B

Calibrate measuring equipment

add topic MEM12022B

Program coordinate measuring machines (advanced)

add topic MEM12025A

Use graphical techniques and perform simple statistical computations

add topic MEM13010A

Supervise occupational health and safety in an industrial work environment

add topic MEM14001B

Schedule material deliveries

add topic MEM14002B

Undertake basic process planning

add topic MEM14003B

Undertake basic production scheduling

add topic MEM14081A

Apply mechanical engineering fundamentals to support design and development of projects

add topic MEM14082A

Apply mechatronics fundamentals to support design and development of engineering projects

add topic MEM14083A

Apply aeronautical fundamentals to support design and development of engineering projects

add topic MEM14084A

Apply avionic fundamentals to support design and development of engineering projects

add topic MEM15007B

Conduct product and/or process capability studies

add topic MEM15008B

Perform advanced statistical quality control

add topic MEM15010B

Perform laboratory procedures

add topic MEM15011B

Exercise external quality assurance

add topic MEM15012B

Maintain/supervise the application of quality procedures

add topic MEM18016B

Analyse plant and equipment condition monitoring results

add topic MEM22002A

Manage self in the engineering environment

add topic MEM22006A

Source and estimate materials

add topic MEM22009A

Manage technical sales and promotion

add topic MEM23001A

Apply advanced mathematical techniques in a manufacturing engineering or related environment

add topic MEM23002A

Apply calculus in engineering situations

add topic MEM23003A

Operate and program computers and/or controllers in engineering situations

add topic MEM23041A

Apply basic scientific principles and techniques in mechanical engineering situations

add topic MEM23051A

Apply basic electro and control scientific principles and techniques in mechanical and manufacturing engineering situations

add topic MEM23052A

Apply basic electro and control scientific principles and techniques in aeronautical engineering situations

add topic MEM23061A

Select and test mechanical engineering materials

add topic MEM23062A

Select and test mechatronic engineering materials

add topic MEM23071A

Select and apply mechanical engineering methods, processes and construction techniques

add topic MEM23072A

Select and apply mechatronic engineering methods, processes and construction techniques

add topic MEM23073A

Select and apply aeronautical engineering methods, processes and construction techniques

add topic MEM23074A

Select and apply avionic engineering methods, processes and construction techniques

add topic MEM24002B

Perform penetrant testing

add topic MEM24004B

Perform magnetic particle testing

add topic MEM24006B

Perform eddy current testing

add topic MEM24008B

Perform ultrasonic testing

add topic MEM24010B

Perform radiographic testing

add topic MEM24011B

Establish non-destructive tests

add topic MEM24012C

Apply metallurgy principles

add topic CPPBDN5013A

Develop and collaborate on building information models for small-scale building design projects

add topic MEA272B

Apply basic scientific principles and techniques in avionic engineering situations

add topic MEA273A

Select and test avionic engineering materials

add topic MEA342A

Apply basic aircraft power plant design characteristics

add topic MEA349B

Apply basic scientific principles and techniques in aeronautical engineering situations

add topic MEA350A

Select and test aeronautical engineering materials

add topic MSACMC410A

Lead change in a manufacturing environment

add topic MSACMC610A

Manage relationships with non-customer external organisations

add topic MSACMC611A

Manage people relationships

add topic MSACMC612A

Manage workplace learning

add topic MSACMS400A

Implement a competitive manufacturing system

add topic MSACMS401A

Ensure process improvements are sustained

add topic MSACMS600A

Develop a competitive manufacturing system

add topic MSACMS601A

Analyse and map a value chain

add topic MSACMS602A

Manage a value chain

add topic MSACMS603A

Develop manufacturing related business plans

add topic MSACMT230A

Apply cost factors to work practices

add topic MSACMT260A

Use planning software systems in manufacturing

add topic MSACMT261A

Use SCADA systems in manufacturing

add topic MSACMT280A

Undertake root cause analysis

add topic MSACMT421A

Facilitate a Just in Time (JIT) system

add topic MSACMT430A

Improve cost factors in work practices

add topic MSACMT432A

Analyse manual handling processes

add topic MSACMT440A

Lead 5S in a manufacturing environment

add topic MSACMT450A

Undertake process capability improvements

add topic MSACMT451A

Mistake proof a production process

add topic MSACMT452A

Apply statistics to processes in manufacturing

add topic MSACMT460A

Facilitate the use of planning software systems in manufacturing

add topic MSACMT461A

Facilitate SCADA systems in a manufacturing team or work area

add topic MSACMT481A

Undertake proactive maintenance analyses

add topic MSACMT482A

Assist in implementing a proactive maintenance strategy

Pathways...

Not Applicable

Entry Requirements

Not Applicable

Licensing Information

There are no specific licences that relate to this qualification. However, for employment at para-professional levels in the aeronautical and avionic fields in the Australian aviation industry, the Australian Defence Force (ADF) and the Civil Aviation Safety Authority (CASA) have requirements that must be met. Units designed to meet these requirements are included as electives in this qualification. Advice on the selection of electives to meet ADF and CASA requirements is given at the end of this qualification.

Employability Skills

Employability Skill	Industry/enterprise requirements for this qualification include:
Communication	Read, interpret and analyse information on specifications, design briefs, charts, lists, drawings and other applicable reference documents Research, organise, analyse and communicate complex information from reference texts, manufacturer's catalogues and industrial magazines, websites, use of phone, email and fax Communicate effectively across a range of communication networks in the workplace, including attending meetings and facilitating small group discussions and meetings on relevant engineering and trade related issues, writing memos or letters, making telephone calls Produce, interpret and analyse engineering drawings, charts and graphs Prepare and disseminate verbal or written technical information, instructions, work plans, reports, specifications and other documentation Identify, access, interpret and analyse trade related information in an enterprise, including quality documentation, equipment manufacturer specifications, engineering data sheets, production and maintenance records and national standards. Use engineering terminology and language appropriate to the situation and target audience Write technical or non-technical reports that include some level of analysis and/or research
Teamwork	Work alone or as part of a team that may include apprentices, other tradespersons, technicians, engineers and production personnel Provide clear and precise information to team members Delegate and supervise work where appropriate
Problem-solving	Analyse information and data from operations, processes, and test results including determining trends from graphical data Develop solutions and recommendations to trade related problems based on analysis of data Apply mathematical techniques and scientific principles to engineering situations (Including arithmetic, algebraic expressions with one independent variable, two-dimensional geometry, trigonometry, linear functions, basic quadratic functions, basic statistical methods and statistical process control) Perform hazard and risk analysis
Initiative and enterprise	Be capable of applying trade-Related skills and knowledge in new and different situations and contexts Apply statistical processes to make recommendations solutions for equipment and and process improvements or to improve sustainability of operations Make modifications to work plans and schedules to overcome unforeseen difficulties or developments Initiate significant modifications to plant and equipment that lead to desired changes in performance
Planning and organising	Organise, sort, categorise and sequence information Select and use planning techniques and tools to plan, sequence and prioritise work operations Prepare, monitor and review work plans, schedules, programs and budgets
Self-management	Carry out work within given timeframe, process and quality constraints Carry out work safely and in accordance with company policy and procedures and legislative requirements Monitor work to ensure compliance with legislation, codes and national standards
Learning	Use manuals, online help and other reference materials as required to research technical information and data suitable and appropriate for advanced trade and technician applications Identify and consult appropriate personnel and technical experts or other reference sources to obtain/verify information Provide and communicate information to other team members Provide on the job training and monitor trainee progress Maintain knowledge of relevant legislative requirements, codes and standards.
Technology	Use computing technology to access, input and store information Apply engineering knowledge and principles Search computer databases and internet for technical information and data suitable and appropriate for advanced trade applications Inspect engineering plant, equipment and systems for optimum operation and undertake modifications as required

NTIS this!

MEM50211 - Diploma of Engineering - Technical

Diploma of Engineering - Technical

Subjects

Pathways...

Entry Requirements

Licensing Information

Employability Skills