Certificate III in Public Safety (Explosive Ordnance Manufacture)
Not applicable.
Subjects
Qualification Requirement: 18 units
All 4 core units plus 7 Group A (specialisation) elective units from the list below plus 7 Group B (general) elective units
Where a pre-requisite unit is attached to an elective unit it is identified by this symbol .
The pre-requisite units attached to any of the elective units must be undertaken and are additional to the number of elective units required for the qualification.
The 7 Group B (general) elective units may be taken from the elective units listed below and may include 2 units taken from this Training Package, any other endorsed Training Package or any state/territory accredited qualification where the unit is in a qualification at the same level or a higher level.
Code | Core Units | |
Work safely with explosive ordnance | ||
Maintain workplace safety | ||
Undertake first response to non-fire incidents | ||
Shift materials safely using manual handling methods | ||
Code | Elective Units | |
Group A (specialisation) | ||
Dispose of non-explosive dangerous goods | ||
Inspect explosive ordnance facilities | ||
Supervise explosive ordnance engineering and logistics processes | ||
Conduct explosive ordnance inspection | ||
Fuze and defuze explosive ordnance | ||
Assemble and disassemble explosive components | ||
Dispose of explosive ordnance | ||
Test for explosive substances | ||
Test confined space environment | ||
Control entry to confined spaces | ||
Monitor and report on hazardous substances safety | ||
Facilitate emergency risk assessment | ||
Use structured problem solving tools | ||
Investigate incidents | ||
Operate a production unit | ||
Operate process control systems | ||
Transfer bulk fluids into/out of storage facility | ||
Carry out inspection of vehicles designed to carry special loads | ||
Operate vehicle carrying special loads | ||
Identify and label explosives and dangerous goods | ||
Load and unload explosives and dangerous goods | ||
Group B (general) | ||
Participate in environmentally sustainable work practices | ||
Manage the impact of change on own work | ||
Lead change in a manufacturing environment | ||
Apply competitive manufacturing practices | ||
Sustain process improvements | ||
Ensure process improvements are sustained | ||
Apply quick changeover procedures | ||
Apply Just In Time (JIT) procedures | ||
Apply cost factors to work practices | ||
Interpret product costs in terms of customer requirements | ||
Apply 5S procedures in a manufacturing environment | ||
Monitor process capability | ||
Apply quality standards | ||
Use planning software systems in manufacturing | ||
Use SCADA systems in manufacturing | ||
Use sustainable energy practices | ||
Use sustainable environmental practices | ||
Undertake root cause analysis | ||
Contribute to the application of a proactive maintenance strategy | ||
Facilitate a Just In Time (JIT) system | ||
Improve cost factors in work practices | ||
Analyse manual handling processes | ||
Lead 5S in a manufacturing environment | ||
Undertake process capability improvements | ||
Mistake proof a production process | ||
Apply statistics to processes in manufacturing | ||
Facilitate the use of planning software systems in manufacturing | ||
Facilitate SCADA systems in manufacturing team or work area | ||
Undertake proactive maintenance analyses | ||
Assist in implementing a proactive maintenance strategy | ||
Facilitate the implementation of OHS for a work group | ||
Shift loads manually utilising non-motorised equipment | ||
Respond to fire | ||
Apply a knowledge of the service environment | ||
Load and unload platforms | ||
Perform purging | ||
Destroy unexploded ordnance | ||
Work with equity and diversity | ||
Establish context and develop risk evaluation criteria | ||
Identify, analyse and evaluate risk | ||
Determine treatment strategies | ||
Manage treatment strategy implementation | ||
Design and manage activities which exercise elements of emergency management | ||
Treat risk at an operational level | ||
Conduct risk assessment | ||
Operate specialised load shifting equipment | ||
Apply safe procedures when handling/transporting dangerous goods or explosives | ||
Conduct housekeeping activities | ||
NOTES BSB units have been imported from the BSB07 Business Services Training Package. CPC units have been imported from the CPC08 Construction, Plumbing and Services Integrated Framework. MSA units have been imported from the MSA07 Manufacturing Training Package. PMA units have been imported from the PMA08 Chemical, Hydrocarbons and Refining Training Package. TLI units have been imported from TLI07 Transport and Logistics Training Package. Information about customising PUA00 Public Safety Training Package qualifications is on page 12. | ||
Pathways...
Not applicable.
Entry Requirements
Not applicable.
Licensing Information
Not applicable.
Employability Skills
Employability Skills Summary for PUA32310 Certificate III in Public Safety (Explosive Ordnance Manufacture)
Employability Skills are part of a unit of competency.
Employability Skills statements from a selection of units of competency from the PUA32310 Certificate III in Public Safety (Explosive Ordnance Manufacture) have been reproduced in the table below.
This table provides an example of Employability Skills for the qualification because Employability Skills within a qualification will vary depending on the qualification packaging options.
Public Safety qualifications have core units (which must be achieved) and elective units (where there is a choice of units which must be achieved) so different Employability Skills Summaries are possible within the one qualification, depending on the package of core units and chosen elective units. Employability Skill | Employability Skills Statement |
Communication | access and clarify safety procedures and instructions access, read, interpret and apply information on safety develop risk statements follow instructions/directives and report information identify and note organisation incident and injury statistics identify and/or acquire documentation and licensing limitations identify and recognise hazardous materials labels and characteristics, and apply relevant action/criteria identify and report incidents identify breaches in site safety and act on or report negotiate means of implementing the emergency risk management process obtain relevant authorisation before specialised and hazardous work is carried out record and report details of first aid administered read to a level required to interpret job instructions, workplace forms and reports use a variety of verbal and non-verbal communication techniques write at the level required to complete workplace documentation and reports |
Teamwork | apply knowledge and principles of teamwork, and team aims and objectives apply knowledge of group dynamics, strategies for team building encourage other team members participate in a team resolve conflict understand the composition of teams, and roles and responsibility of team members use techniques for supporting others/team members work with committee members |
Problem solving | analyse relevant workplace data i.e. incident and environmental monitoring, to identify hazards, assess risks and evaluate effectiveness of occupational health and safety control measures assess and apply compatibility assess fire situation calculate and apply net explosive quantity define and solve problems determine appropriate course of action under supervision extinguish fires prioritise risks by considering vulnerability and priority for treatment |
Initiative and enterprise | observe and respond to changing circumstances and unusual situations support others/team members |
Planning and organising | handle and move hazardous materials observe and identify hazardous substances plan and prepare for control of confined space entry prepare for the identification of a hazardous substance in the workplace prepare for environmental testing |
Self-management | apply personal safety measures establish a project and see it through maintain momentum and achieve the project outcomes within available resources recognise and apply individual responsibilities regarding hazardous materials |
Learning | access, interpret and rehearse procedures related to a fire emergency learn about organisational policies and procedures learn about relevant legislation and standards |
Technology | achieve a safe work environment when working with explosive ordnance check equipment identify, acquire and prepare equipment and resources required for the testing identify location of firefighting equipment identify, select and use firefighting equipment operate any equipment pertinent to the control of confined space entry |