Certificate IV in Electrical - Fire Protection Control Systems

Scope

This qualification provides competencies to select, install, commission, fault find and maintain fire protection control systems in buildings. It includes ERAC requirements for an ‘Electrician’s licence’.


Subjects

Completion requirements

The requirements for granting this qualification will be met when competency is demonstrated and achieved for:

All the Core competency standard units, defined in the Core Competency Standard Units table below and

A combination of Elective competency standard units to achieve a total weighting of 100 points in accordance with the Elective Competency Standard Units table below.

Note: add topic UEENEEG105A - Those holding an Unrestricted Electricians Licence or equivalent issued in an Australian State or Territory meets the requirements of this unit and its pre-requisite requirements.

Core Competency Standard Units

All Core competency standard units to be achieved

Weighting Points

add topic UEENEEE038B

Participate in development and follow a personal competency development plan

20

add topic UEENEEE101A

Apply Occupational Health Safety regulations, codes and practices in the workplace

20

add topic UEENEEE102A

Fabricate, dismantle, assemble of utilities industry components

40

add topic UEENEEE104A

Solve problems in d.c. circuits

80

add topic UEENEEE105A

Fix and secure electrotechnology equipment

20

add topic UEENEEE107A

Use drawings, diagrams, schedules, standards, codes and specifications

40

add topic UEENEEE117A

Implement and monitor energy sector OHS policies and procedures

20

add topic UEENEEE124A

Compile and produce an energy sector detailed report

60

add topic UEENEEE137A

Document and apply measures to control OHS risks associated with electrotechnology work

20

add topic UEENEEG006A

Solve problems in single and three phase low voltage machines

80

add topic UEENEEG033A

Solve problems in single and three phase low voltage electrical apparatus and circuits

60

add topic UEENEEG063A

Arrange circuits, control and protection for general electrical installations

40

add topic UEENEEG101A

Solve problems in electromagnetic devices and related circuits

60

add topic UEENEEG102A

Solve problems in low voltage a.c. circuits

80

add topic UEENEEG103A

Install low voltage wiring and accessories

20

add topic UEENEEG104A

Install appliances, switchgear and associated accessories for low voltage electrical installations

20

add topic UEENEEG105A

Verify compliance and functionality of low voltage general electrical installations

40

add topic UEENEEG106A

Terminate cables, cords and accessories for low voltage circuits

40

add topic UEENEEG107A

Select wiring systems and cables for low voltage general electrical installations

60

add topic UEENEEG108A

Trouble-shoot and repair faults in low voltage electrical apparatus and circuits

40

add topic UEENEEG109A

Develop and connect electrical control circuits

80

add topic UEENEEH161A

Position and terminate fire detection and warning system apparatus

40

add topic UEENEEH162A

Verify compliance and functionality of fire protection installations

60

add topic UEENEEH163A

Enter and verify programs in preparation for commissioning fire protection systems

40

add topic UEENEEH164A

Commission commercial fire protection systems

40

add topic UEENEEH165A

Find and repair faults in fire protection systems

40

add topic UEENEEK145A

Implement and monitor energy sector policies and procedures for environmental and sustainable work practices

20

Total points in core

1180

Elective Competency Standard Units

Complete Elective units to achieve a total of weighting of 100 points from the following groups:

Group

Minimum points

Maximum points

A

Imported and Common Elective Units

Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 4. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points.

0

60

B

Qualification Elective Units

0

60

C

Qualification Elective Units

You may select all your elective units from this Group

40

100

Group A Imported and Common Elective Units

You may complete units to a maximum weighting of 60

Weighting Points

add topic UEENEEC001B

Maintain documentation

20

add topic UEENEEC002B

Source and purchase material/parts for installation or service jobs

20

add topic UEENEEC003B

Provide quotations for installation or service jobs

20

add topic UEENEEC010B

Deliver a service to customers

20

add topic UEENEED101A

Use basic computer applications relevant to a workplace

20

add topic UEENEEE009B

Comply with scheduled and preventative maintenance program processes

20

add topic UEENEEE020B

Provide basic instruction in the use of electrotechnology apparatus

20

add topic CPCCOHS1001A

Work safely in the construction industry

10

add topic HLTCPR211A

Perform CPR

10

add topic CPPFES2043A

Prevent ozone depleting substance and synthetic greenhouse gas emissions

10

Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 4. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points.

Note: For further information see Application of the NQC Flexibility Formula, UEE11 Electrotechnology Training Package, Version 1, Volume 1 Qualification Framework

Up to 60 points

Group B Qualification Elective Units

You may complete units to a maximum weighting of 60

Weighting Points

add topic UEENEED104A

Use engineering applications software on personal computers

40

add topic UEENEEF102A

Install and maintain cabling for multiple access to telecommunication services

120

add topic UEENEEF104A

Install and modify performance data communication copper cabling

40

add topic UEENEEF105A

Install and modify optical fibre performance data communication cabling

40

add topic UEENEEG113A

Install and maintain emergency and safety systems.

60

add topic UEENEEH102A

Repair basic electronic apparatus faults by replacement of components

40

add topic UEENEEH111A

Troubleshoot single phase input d.c. power supplies

40

add topic UEENEEH138A

Fault find and repair complex power supplies

40

add topic UEENEEI116A

Enter and verify operating instructions in microprocessor control devices

20

add topic UEENEEI150A

Develop, enter and verify discrete control programs for programmable controllers

60

add topic UEENEEM024A

Install explosion-protected equipment and wiring systems gas atmospheres

60

add topic UEENEEM077A

Install and maintain the integrity of fixed gas detection equipment

20

add topic UEENEEM080A

Report on the integrity of explosion-protected equipment in a hazardous area

20

Group C Qualification Elective Units

You must complete units to a minimum weighting of 40

You may select all your elective units from this Group

Weighting Points

add topic UEENEEG121A

Verify compliance and functionality of special LV electrical installations

40

add topic UEENEEG122A

Conduct compliance inspection of single phase LV electrical installations

60

add topic UEENEEG123A

Conduct compliance inspection of LV electrical installations with demand exceeding 100 A per phase

40

add topic UEENEEG124A

Conduct compliance inspection of special LV electrical installations

60

add topic UEENEEG172A

Investigate and produce reports on electrical incidents

60

add topic UEENEEG175A

Develop compliance policies and plans to conduct a electrical contracting business

80

add topic UEENEEG179A

Develop detailed electrical drawings

60

add topic UEENEEI151A

Develop, enter and verify programs for industrial control systems using high level instructions

60

add topic UEENEEI152A

Develop, enter and verify programs in Supervisory Control and Data Acquisition systems

60

add topic UEENEEM042A

Conduct visual inspection of hazardous areas installations

40

Note:
1. Prerequisite pathways shall be identified and met for all elective units selected.

2. In selecting elective units considerations to career planning advice should be given to units that form part of a prerequisite pathway for the progression to achieve particular competencies or qualification at a higher level.

END OF QUALIFICATION


Pathways...

    Not applicable.


Entry Requirements

Not applicable.


Licensing Information

Not applicable.


Employability Skills

Not applicable.