Diploma of Industrial Electronics and Control Engineering

Scope

This qualification provides competencies to develop, select, commission, maintain and diagnose faults/malfunctions of equipment and systems for the monitoring and control of plant, machines and processes.


Subjects

Completion requirements

The requirements for granting this qualification will be met when competency is demonstrated and achieved for:

All the Core competency standard units, defined in the Core Competency Standard Units table below and

A combination of Elective competency standard units to achieve a total weighting of 480 points in accordance with the Elective Competency Standard Units table below.

All the required prerequisite competency standard units

Note: add topic UEENEEG105A - Those holding an Unrestricted Electricians Licence or equivalent issued in an Australian State or Territory meets the requirements of this unit and its pre-requisite requirements.

Core Competency Standard Units

All Core competency standard units to be achieved

Weighting Points

add topic UEENEEE038B

Participate in development and follow a personal competency development plan

20

add topic UEENEEE075B

Write specifications for industrial electronics and control projects

40

add topic UEENEEE101A

Apply Occupational Health Safety regulations, codes and practices in the workplace

20

add topic UEENEEE102A

Fabricate, dismantle, assemble of utilities industry components

40

add topic UEENEEE104A

Solve problems in d.c. circuits

80

add topic UEENEEE105A

Fix and secure electrotechnology equipment

20

add topic UEENEEE107A

Use drawings, diagrams, schedules, standards, codes and specifications

40

add topic UEENEEE117A

Implement and monitor energy sector OHS policies and procedures

20

add topic UEENEEE124A

Compile and produce an energy sector report

60

add topic UEENEEE137A

Document and apply measures to control OHS risks associated with electrotechnology work

20

add topic UEENEEG006A

Solve problems in single and three phase low voltage machines

80

add topic UEENEEG033A

Solve problems in single and three phase low voltage electrical apparatus and circuits

60

add topic UEENEEG063A

Arrange circuits, control and protection for general electrical installations

40

add topic UEENEEG101A

Solve problems in electromagnetic devices and related circuits

60

add topic UEENEEG102A

Solve problems in low voltage a.c. circuits

80

add topic UEENEEG103A

Install low voltage wiring and accessories

20

add topic UEENEEG104A

Install appliances, switchgear and associated accessories for low voltage electrical installations

20

add topic UEENEEG105A

Verify compliance and functionality of low voltage general electrical installations

40

add topic UEENEEG106A

Terminate cables, cords and accessories for low voltage circuits

40

add topic UEENEEG107A

Select wiring systems and cables for low voltage general electrical installations

60

add topic UEENEEG108A

Trouble-shoot and repair faults in low voltage electrical apparatus and circuits

40

add topic UEENEEG109A

Develop and connect electrical control circuits

80

add topic UEENEEK132A

Develop strategies to address environmental and sustainability issues in the energy sector

20

add topic UEENEEI124A

Fault find and repair analogue circuits and components in electronic control systems

60

add topic UEENEEI139A

Diagnose and rectify faults in digital controls systems

60

Total points in core

1120

Elective Competency Standard Units

Complete Elective units to achieve a total of weighting of 480 points from the following groups:

Group

Minimum points

Maximum points

A

Imported and Common Elective Units

Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 5. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points.

0

220

B

Qualification Elective Units

0

100

C

Qualification Elective Units

0

120

D

Qualification Elective Units

You may select all your elective units from this Group

260

480

Group A Imported and Common Elective Units

You may complete units to a maximum weighting of 220

Weighting Points

add topic BSBMGT502B

Manage people performance

70

add topic BSBINM501A

Manage an information or knowledge management system

50

add topic BSBMGT516C

Facilitate continuous improvement

60

add topic BSBINN502A

Build and sustain an innovative work environment

50

add topic BSBWOR502B

Ensure team effectiveness

60

add topic UEENEEC001B

Maintain documentation

20

add topic UEENEEC002B

Source and purchase material/parts for installation or service jobs

20

add topic UEENEEC003B

Provide quotations for installation or service jobs

20

add topic UEENEEC010B

Deliver a service to customers

20

add topic UEENEED101A

Use basic computer applications relevant to a workplace

20

add topic UEENEEE009B

Comply with scheduled and preventative maintenance program processes

20

add topic UEENEEE020B

Provide basic instruction in the use of electrotechnology apparatus

20

Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 5. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points.

Note: For further information see Application of the NQC Flexibility Formula, UEE11 Electrotechnology Training Package, Version 1, Volume 1 Qualification Framework

Up to 220 points

Group B Qualification Elective Units

You may complete units to a maximum weighting of 100

Weighting Points

add topic UEENEED104A

Use engineering applications software on personal computers

40

add topic UEENEEG110A

Diagnose and rectify faults in d.c. electrical apparatus and circuits

60

add topic UEENEEG111A

Carry out repairs to electrical apparatus

40

add topic UEENEEG113A

Install and maintain emergency and safety systems.

60

add topic UEENEEG116A

Diagnose and rectify faults in lifts/escalator systems

80

add topic UEENEEG118A

Maintain operation of electrical mining equipment and systems

60

add topic UEENEEG119A

Maintain the operation of electrical marine equipment and systems

60

add topic UEENEEG129A

Overhaul and repair switchgear and controlgear

60

add topic UEENEEH102A

Repair basic electronic apparatus faults by replacement of components

40

add topic UEENEEH111A

Troubleshoot single phase input d.c. power supplies

40

add topic UEENEEH150A

Assemble and set up basic security systems

80

add topic UEENEEI101A

Use instrumentation drawings, specifications, standards and equipment manuals

40

add topic UEENEEI102A

Solve problems in pressure measurement circuits and systems

40

add topic UEENEEI103A

Solve problems in density/level measurement circuits and systems

40

add topic UEENEEI104A

Solve problems in flow measurement circuits and systems

40

add topic UEENEEI105A

Solve problems in temperature measurement circuits and systems

40

add topic UEENEEI116A

Enter and verify operating instructions in microprocessor equipped devices

20

add topic UEENEEI150A

Develop, enter and verify discrete control programs for programmable controllers

60

Group C Qualification Elective Units

You may complete units to a maximum weighting of 120

Weighting Points

add topic UEENEEC005B

Estimate electrotechnology projects

40

add topic UEENEED116A

Develop computer network services

120

add topic UEENEEG132A

Carry out and report electrical field testing findings

60

add topic UEENEEG179A

Develop detailed electrical drawings

60

add topic UEENEEI119A

Set up transducers and field control devices

60

add topic UEENEEI120A

Provide solutions to problems in industrial control systems

60

add topic UEENEEI125A

Provide solutions to fluid circuit operations

60

add topic UEENEEI126A

Provide solutions to pneumatic/hydraulic system operations

80

add topic UEENEEI148A

Provide solutions to single phase electronic power control problems

60

add topic UEENEEI149A

Provide solutions to polyphase electronic power control problems

60

add topic UEENEEI151A

Develop, enter and verify programs for industrial control systems using high level instructions

60

add topic UEENEEI152A

Develop, enter and verify programs in Supervisory Control and Data Acquisition systems

60

add topic UEENEEI155A

Develop structured programs to control external devices

40

Group D Qualification Elective Units

You must complete units to a minimum weighting of 260

You may select all your elective units from this Group

Weighting Points

add topic UEENEED110A

Set up and create content for a web server

120

add topic UEENEED111A

Develop object oriented code

140

add topic UEENEED144A

Commission computer systems

20

add topic UEENEED145A

Modify-redesign of computer system

20

add topic UEENEEG131A

Evaluate performance of LV electrical apparatus

40

add topic UEENEEG180A

Develop detailed and complex drawings for electrical systems using CAD systems

60

add topic UEENEEI145A

Diagnose and rectify faults in a.c. motor drive systems

60

add topic UEENEEI146A

Diagnose and rectify faults in d.c. motor drive systems

60

add topic UEENEEI147A

Diagnose and rectify faults in servo drive systems

60

add topic UEENEEI156A

Develop and test code for microcontroller devices

60

add topic UEENEEI157A

Configure and maintain industrial control system networks

60

Note:
1. Prerequisite pathways shall be identified and met for all elective units selected.

2. In selecting elective units considerations to career planning advice should be given to units that form part of a prerequisite pathway for the progression to achieve particular competencies or qualification at a higher level.

3. Registered training organisations shall provide competency development advice in relation to any licensing requirements to practice that apply, or can contribute towards the qualification requirement, prior to establishing the competency development plan.

END OF QUALIFICATION


Pathways...

    Not applicable.


Entry Requirements

Not applicable.


Licensing Information

Not applicable.


Employability Skills

Not applicable.