UEG40114 - Certificate IV in Gas Supply Industry Operations

The requirements for granting this qualification will be met when competency is demonstrated and achieved for:

All the Core competency standard units to achieve a total weighting of 290 points, defined in the Core Competency Standard Units table below and

A combination of Elective competency standard units to achieve a total weighting of 990 points in accordance with the Elective Competency Standard Units tables below, resulting in the achievement of overall weighting of 1280 points.

All the required pre-requisite competency standard units have been met as required.

Core Competency Standard Units All Core competency standard units to be achieved		Weighting Points
UEGNSG005A	Prepare to work in the gas industry	20
UEGNSG132A	Carry out basic work activities in a gas industry work environment	60
UEGNSG133A	Comply with environmental policies and procedures in the utilities industry	40
UEGNSG141A	Apply Workplace Health and Safety regulations, codes and practices in the gas supply industry	20
UEENEEE117A	Implement and monitor energy sector OHS policies and procedures	20
BSBMGT402A	Implement operational plan	40
BSBWOR402A	Promote team effectiveness	50
BSBWOR404B	Develop Work Priorities	40
	Total points in core	290

Elective Competency Standard Units Complete Elective units to achieve a total of weighting of 990 points from the following groups:
Group		Minimum points	Maximum points
A	Imported and Common Elective Units Imported units from other qualifications, training packages and/or state accredited courses can be added to this group, but they must be at AQF level 4. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points. Note: For further information see Application of the NQC Flexibility Formula, refer to UEG11 Gas Industry Training Package, Version 2, Qualification Framework.	0	220
B	Qualification AQF 2 Electives You may select some elective units from this Group	0	180
C	Qualification AQF 3 Electives You may select some elective units from this Group	0	670
D	Qualification AQF 4 Electives You may select all your elective units from this Group	200	990

Group A Imported and Common Elective Units You may complete units to maximum weighting of 220 points		Weighting Points
BSBCUS401B	Coordinate implementation of customer service strategies	40
BSBFLM303C	Contribute to effective workplace relationships	40
BSBFLM305C	Support operational plan	40
BSBFLM306C	Provide workplace information and resourcing plans	40
BSBFLM309C	Support continuous improvement systems and processes	40
BSBFLM311C	Support a workplace learning environment	40
BSBFLM312B	Contribute to team effectiveness	40
BSBINM401A	Implement workplace information system	40
BSBINN301A	Promote innovation in a team environment	40
BSBLED401A	Develop teams and individuals	40
BSBMGT403A	Implement continuous improvement	40
BSBWHS301A	Maintain workplace safety	40
BSBWHS303A	Participate in WHS hazard identification, risk assessment and risk control	50
BSBWOR301B	Organise personal work priorities and development	40
BSBWOR401A	Establish effective workplace relationships	50
CPCCLDG3001A	Licence to perform dogging	30
CPCCLRG3001A	Licence to perform rigging basic level	40
CPCCLRG3002A	Licence to perform rigging intermediate level	40
CPCCOHS1001A	Work safely in the construction industry	10
CPCPCM4012A	Estimate and cost work	40
CPPFES2005A	Demonstrate first attack firefighting equipment	15
HLTAID001	Provide cardiopulmonary resuscitation	10
HLTAID003	Provide first aid	10
HLTAID005	Provide first aid in remote situations	10
HLTHSE204D	Follow safe manual handling practices	20
MEM05004C	Perform routine oxy acetylene welding	20
MEM05012C	Perform routine manual metal arc welding	20
MEM05015D	Weld using manual metal arc welding process	40
MEM05045B	Perform pipe welds to code standards using manual metal arc welding process	60
MSAPMOHS110A	Follow emergency response procedures	20
MSAPMOHS205A	Control minor incidents	30
MSAPMOHS216A	Operate breathing apparatus	20
MSAPMOHS217A	Gas test atmospheres	30
MSAPMOPS400A	Optimise process/plant area	60
MSAPMPER200C	Work in accordance with an issued permit	20
MSAPMPER201A	Control work permits	20
MSAPMPER202A	Monitor and control work permits	20
MSAPMPER300C	Issue work permits	20
MSAPMPER400A	Coordinate permit process	30
MSAPMSUP210A	Process and record information	30
MSAPMSUP240A	Undertake minor maintenance	30
MSAPMSUP303A	Identify equipment faults	40
MSS402061A	Use SCADA systems in operations	30
MSS402080A	Undertake root cause analysis	50
PMAOHS211B	Prepare equipment for emergency response	20
PMAOHS310B	Investigate incidents	30
PMAOHS311B	Lead emergency teams	20
PMAOMIR210B	Control evacuation to muster point	20
PMAOMIR346B	Assess and secure an incident site	30
PMAOMIR407B	Audit incident preparedness and established response systems	80
PMAOMIR418B	Coordinate incident response	40
PMAOMIR430B	Conduct and assess incident exercises	35
PMAOMIR444B	Develop incident containment tactics	40
PMAOPS312B	Undertake ship loading/unloading operations	40
PMAOPS402A	Respond to abnormal process situations	50
PMAOPS405A	Operate complex control systems	80
PMAOPS410B	Monitor remote production facilities	40
PMASUP410B	Develop plant documentation	30
PMASUP444A	Plan plant preparation and isolation	50
PMBWELD301B	Butt weld polyethylene plastic pipelines	20
PMBWELD302B	Electrofusion weld polyethylene pipelines	20
PMC563081C	Carry out stock control	20
RIICCM205D	Carry out manual excavation	10
RIICCM206D	Support plant operations	10
RIICCM207D	Spread and compact materials manually	10
RIICCM208D	Carry out basic levelling	10
RIICCM210D	Install trench support	15
RIICRC208D	Lay pipes	40
RIIHAN309D	Conduct Telescopic Materials Handler Operations	80
RIIMPO304D	Conduct wheel loader operations	40
RIIMPO308D	Conduct tracked dozer operations	40
RIIMPO309D	Conduct wheeled dozer operations	40
RIIMPO318D	Conduct civil construction skid steer loader operations	70
RIIMPO319D	Conduct backhoe/loader operations	50
RIIMPO320D	Conduct civil construction excavator operations	80
RIIWHS202D	Enter and work in confined spaces	30
RIIWHS204D	Work safely at heights	20
RIIWHS205D	Control traffic with stop-slow bat	10
RIIWHS302D	Implement traffic management plan	20
RIIRIS301D	Apply risk management processes	40
RIISAM201D	Handle resources and infrastructure materials and safely dispose of non-toxic materials	15
RIIWMG203D	Drain and dewater civil construction site	20
TLIB2004A	Carry out vehicle inspection	20
TLIC2002A	Drive light rigid vehicle	40
TLIC2025A	Operate four wheel drive vehicle	40
TLIC3003A	Drive medium rigid vehicle	40
TLIC3004A	Drive heavy rigid vehicle	40
TLIC3005A	Drive heavy combination vehicle	40
TLIC4006A	Drive multi-combination vehicle	40
TLIC4067A	Operate LP gas tanker	40
TLID2003A	Handle dangerous goods/hazardous substances	40
TLID2010A	Operate a forklift	40
TLID2016A	Load and unload explosives and dangerous goods	30
TLID3015A	Identify and label explosives and dangerous goods	20
TLID3023A	Use specialised liquid bulk gas transfer equipment	40
TLID3027A	Prepare for transport of dangerous goods	50
TLID3033A	Operate a vehicle-mounted loading crane	40
TLID3036A	Lift and move load using a mobile crane	40
TLIF2006A	Apply accident-emergency procedures	20
TLIF2010A	Apply Fatigue Management Strategies	30
TLIF2012A	Apply safe procedures when handling/transporting dangerous goods or explosives	30
TLIF3063A	Administer the implementation of fatigue management strategies	50
TLIF3093A	Implement chain of responsibility regulations	30
TLIF3096A	Carry out emergency response to a dangerous goods incident	40
TLIF4007A	Implement and coordinate accident-emergency procedures	40
TLIF4065A	Ensure compliance with Australian Dangerous Goods Code	70
TLIF4066A	Implement and supervise transport regulations compliance systems	80
TLIF4094A	Ensure compliance with chain of responsibility	40
TLIL4059A	Implement asset management systems	40
TLILIC0012A	Licence to operate a vehicle loading crane (capacity 10 metre tonnes and above)	40
TLILIC2001A	Licence to operate a forklift truck	40
TLILIC2014B	Licence to drive a light rigid vehicle	40
TLILIC2015B	Licence to drive a medium rigid vehicle	40
TLILIC2016B	Licence to drive a heavy rigid vehicle	50
TLILIC3006A	Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity)	60
TLILIC3008A	Licence to operate a slewing mobile crane (up to 20 tonnes)	70
TLILIC3013A	Preparation to transport dangerous goods by road	50
TLILIC3017B	Licence to drive a heavy combination vehicle	60
TLILIC3018B	Licence to drive a multi combination vehicle	60
TLILIC4009A	Licence to operate a slewing mobile crane (up to 60 tonnes)	70
UEENEEC001B	Maintain documentation	20
UEENEED101A	Use computer applications relevant to a workplace	20
	Imported units from other qualifications, training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 3. If units have not being assigned a weighting Pathways... Not applicable. Entry Requirements Not applicable. Licensing Information Not applicable. Employability Skills Not applicable. or more... UEG40114 on training.gov.au About NTISthis Credits Subject list If you're studying or delivering more than one unit of competency, you can put them in a cluster here - ready to process as a batch. Add units to this area by clicking on the icons in the 'Subjects' section below. Drag and drop to re-arrange units in the list. Coded by Peter Shanks (botheredbybees), page design by Jayj.dk and Peter Shanks

Certificate IV in Gas Supply Industry Operations

Subjects

Pathways...

Entry Requirements

Licensing Information

Employability Skills