Scope: Those gaining this qualification will be able to complete power generation work function such as installation, repair and maintenance of plant and mechanical systems, maintenance planning and scheduling and observation of safe working practices and environmental procedures. Supervision of others and coordination of work activities of individuals and/or teams |
Completion requirements: The requirements for granting this qualification will be met when competency is demonstrated and achieved for: All the Core competency standard units, defined in the Core Competency Standard Units table below and A combination of Elective competency standard units to achieve a total weighting of 510 points in accordance with the Elective Competency Standard Units table below. | ||
Core Competency Standard Units All core competency standard units to be achieved | Weighting Points | |
Perform general machining | 80 | |
Perform lathe operations | 40 | |
Perform milling operations | 40 | |
Perform grinding operations | 40 | |
Interpret technical drawing | 40 | |
Perform precision mechanical measurement | 20 | |
Perform Engineering Measurements | 50 | |
Perform Computations | 30 | |
Use hand tools | 20 | |
Use power tools/hand held operations | 20 | |
Use tools for precision work | 40 | |
Repair and fit engineering components | 60 | |
Maintain and repair mechanical drives and mechanical transmission assemblies | 40 | |
Perform levelling and alignment of machines and engineering components | 40 | |
Dismantle, replace and assemble engineering components | 30 | |
Implement and monitor energy sector OHS policies and procedures | 20 | |
Apply Occupational Health and Safety regulations, codes and practices in the workplace | 20 | |
Apply quality systems to work | 20 | |
Maintain Quality Systems within the Team | 20 | |
Facilitate Effective Workplace Communications | 20 | |
Monitor and Implement Environmental Plans and Procedures | 20 | |
Control permit to work operations | 30 | |
Plan and Organise Work | 30 | |
Total points in core | 770 | |
Elective Competency Standard Units Complete Elective units to achieve a total of weighting of 510 points from the following groups: | ||
Group | Minimum points | Maximum points |
A Imported and Common Elective Units Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 4. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points. | 0 | 220 |
B Qualification Electives You may select units from this group for qualification completion. | 0 | 310 |
C Qualification Electives You may select all your elective units from this Group | 200 | 510 |
Group A - Imported and Common Elective Units. Complete units to a maximum weighting of 220 points | Weighting Points | |
Coordinate implementation of customer service strategies | 40 | |
Implement workplace information system | 40 | |
Promote Innovation in a team environment | 40 | |
Develop teams and individuals | 40 | |
Implement operational plan | 40 | |
Implement continuous improvement | 40 | |
Establish effective workplace relationships | 50 | |
Promote team effectiveness | 50 | |
Develop Work Priorities | 40 | |
Use Explosive Power Tools | 15 | |
Licence to perform dogging | 30 | |
License to Perform Rigging Basic Level | 40 | |
Licence to Perform Rigging Intermediate Level | 40 | |
License to Erect, Alter and Dismantle Scaffolding Basic Level | 40 | |
Prepare basic engineering drawing | 80 | |
Perform electrical/electronic detail drafting | 80 | |
Perform basic engineering detail drafting | 80 | |
Perform advanced engineering detail drafting | 40 | |
Conduct Telescopic Materials Handler Operations | 80 | |
Provide training through instruction and demonstration of work skills | 40 | |
License to operate a vehicle loading crane (Capacity 10 metre tonnes and above) | 40 | |
Licence to operate a forklift truck | 40 | |
License to Operate a Boom Type Elevating Work Platform (Boom Length 11 Metres or more) | 30 | |
Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity) | 60 | |
Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 4. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points. Note: For further information see Application of the NQC Flexibility Formula, Page 10, UEP12 ESI Generation Sector Training Package, Part1.1.00 | Up to 220 points | |
Group B Qualification Electives. Complete units to a maximum weighting of 310 points | Weighting Points | |
Perform routine oxy acetylene welding | 20 | |
Perform manual heating and thermal cutting | 20 | |
Perform routine manual metal arc welding | 20 | |
Perform equipment condition monitoring and recording | 40 | |
Maintain pneumatic system components | 40 | |
Maintain hydraulic system components | 40 | |
Install and Maintain Industrial Pipework | 40 | |
Maintain Mechanical Valves | 40 | |
Maintain Mechanical Pumps | 40 | |
Maintain Industrial Fans | 40 | |
Maintain Industrial Screens, Strainers and Filters | 20 | |
Maintain Conveyors and Associated Equipment | 40 | |
Maintain Material Feeders | 40 | |
Maintain Material Crushers | 40 | |
Maintain Fuel Transport Equipment | 80 | |
Maintain Industrial Pressure Vessels | 80 | |
Maintain Internal Combustion Engines | 100 | |
Maintain Hydro Turbines | 100 | |
Maintain Wind Turbines | 100 | |
Diagnose and Repair Faults in Mechanical Equipment | 40 | |
Conduct Generator Mechanical Maintenance | 80 | |
Inspect and Repair/Replace Faults in Mechanical Equipment/Components | 40 | |
Perform Sheet Metal Work | 60 | |
Fabricate Metal Structures and Components | 40 | |
Install and commission stationary gas fuelled reciprocating engines | 60 | |
Repair and maintain stationary gas fuelled reciprocating engines | 60 | |
Conduct Single Energy Source Isolation Procedures for Permit to Work | 40 | |
Group C Qualification Electives. At least 200 points to be achieved from this group. You may select all your elective units from this Group. | Weighting Points | |
Install and Maintain Complex Mechanical Seals | 40 | |
Conduct Complex Levelling and Alignment | 40 | |
Maintain Complex Mechanical Valves | 40 | |
Maintain Complex Mechanical Pumps | 40 | |
Install and Maintain a Steam Turbine | 100 | |
Install and Maintain a Gas Turbine | 100 | |
Install Hydro Turbines | 100 | |
Perform Civil Drafting | 80 | |
Conduct Technical Inspections of Process Plant and Equipment | 60 | |
Conduct Performance Testing on Process Plant and Equipment | 60 | |
Monitor Efficiency of Thermal Steam Cycle Power Plant | 60 | |
Conduct Multiple Energy Source Isolation Procedures for procedures for a Permit to Work | 40 | |
Perform complex milling operations | 40 | |
Perform complex grinding operations | 40 | |
Perform complex lathe operations | 40 | |
Maintain pneumatic systems | 40 | |
Maintain hydraulic systems | 40 | |
Maintain fluid power controls | 80 | |
Note:
1. Prerequisite pathways shall be identified and met for all elective units selected.
2. In selecting elective units considerations to career planning advice should be given to units that form part of a prerequisite pathway for the progression to achieve particular competencies or qualification at a higher level.
END OF QUALIFICATION
Not applicable.
Not applicable.
Not applicable.
Not applicable.
