Certificate IV in ESI Generation Maintenance - Electrical Electronics

Scope: This qualification provides competencies to manufacture, fit, assemble, erect, operate, test, fault find, alter, repair electrical equipment, electronic, instrumentation systems, and includes electrical wiring work only if that work is associated with assembling, maintaining, terminating or altering the wiring between electrical components within a power generating plant or machinery, maintenance planning and scheduling and supervision of others and coordination of work activities of individuals and/or teams.

Electrical equipment means any appliance, article, accessory, wire, fitting, cable, conduit or apparatus that generates, uses, conveys or controls (or that is intended to generate, use, convey or control) electricity above extra low voltage.

This qualification does not authorise the holder to install any electrical wiring systems within an electrical installation as prescribed by definitions contained in AS/NZS 3000.


Subjects

Completion requirements:

The requirements for granting this qualification will be met when competency is demonstrated and achieved for:

All the Core competency standard units, defined in the Core Competency Standard Units table below and

A combination of Elective competency standard units to achieve a total weighting of 460 points in accordance with the Elective Competency Standard Units table below.

Core Competency Standard Units

All core competency standard units to be achieved

Weighting Points

add topic UEENEEE101A

Apply Occupational Health and Safety regulations, codes and practices in the workplace

20

add topic UEENEEE102A

Fabricate, dismantle, assemble utilities components

40

add topic UEENEEE104A

Solve problems in d.c. circuits

80

add topic UEENEEE105A

Fix and secure electrotechnology equipment

20

add topic UEENEEE107A

Use drawings, diagrams, schedules, standards, codes and specifications

40

add topic UEENEEE117A

Implement and monitor energy sector OHS policies and procedures

20

add topic UEENEEE137A

Document and apply measures to control OHS risks associated with electrotechnology work

20

add topic UEENEEG006A

Solve problems in single and three phase low voltage machines

80

add topic UEENEEG033A

Solve problems in single and three phase low voltage electrical apparatus and circuits

60

add topic UEENEEG063A

Arrange circuits, control and protection for general electrical installations

40

add topic UEENEEG101A

Solve problems in electromagnetic devices and related circuits

60

add topic UEENEEG102A

Solve problems in low voltage a.c circuits

80

add topic UEENEEG106A

Terminate cables, cords and accessories for low voltage circuits

40

add topic UEENEEG108A

Trouble-shoot and repair faults in low voltage electrical apparatus and circuits

40

add topic UEENEEG109A

Develop and connect electrical control circuits

80

add topic UEPOPS338B

Facilitate Effective Workplace Communications

20

add topic UEPOPS371A

Carry out operational checks on in-service electrical plant

40

add topic UEPOPS417B

Monitor and Implement Environmental Plans and Procedures

20

add topic UEPOPS430B

Control permit to work operations

20

Total points in core

820

Elective Competency Standard Units

Complete Elective units to achieve a total of weighting of 460 points from the following groups:

Group

Minimum points

Maximum points

A

Imported and Common Elective Units

Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 4. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points.

0

220

B

Qualification Electives

You may select units from this group for qualification completion.

0

220

C

Qualification Electives

You may select all your elective units from this Group

240

460

Group A - Imported and Common Elective Units.

Complete units to a maximum weighting of 220 points.

Weighting Points

add topic UEENEEC001B

Maintain documentation

20

add topic UEENEEC010B

Deliver a service to customers

20

add topic UEENEED101A

Use basic computer applications relevant to a energy sector workplace

20

add topic UEENEED104A

Use software for engineering applications

40

add topic UEENEEE124A

Compile and produce an energy sector detailed report

60

add topic BSBCUS401B

Coordinate implementation of customer service strategies

40

add topic BSBINM401A

Implement workplace information system

40

add topic BSBINN301A

Promote Innovation in a team environment

40

add topic BSBLED401A

Develop teams and individuals

40

add topic BSBMGT402A

Implement operational plan

40

add topic BSBMGT403A

Implement continuous improvement

40

add topic BSBWOR401A

Establish effective workplace relationships

50

add topic BSBWOR402A

Promote team effectiveness

50

add topic BSBWOR404B

Develop Work Priorities

40

add topic TAEDEL301A

Provide training through instruction and demonstration of work skills

40

Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 4. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points.

Note: For further information see Application of the NQC Flexibility Formula, Page 10, UEP12 ESI Generation Sector Training Package, Part1.1.00

Up to 220

points

Group B Qualification Electives.

Complete units to a maximum weighting of 220 points.

Weighting Points

add topic UEENEEF102A

Install and maintain cabling for multiple access to telecommunication services

120

add topic UEENEEF105A

Install and modify optical fibre performance data communication cabling

40

add topic UEENEEI101A

Use instrumentation drawings, specifications, standards and equipment manuals

40

add topic UEENEEI107A

Install process instrumentation and tubing and control cabling

20

add topic UEENEEI108A

Install process control apparatus and associated equipment

20

add topic UEPMNT319B

Maintain and Test Fixed Fire Protection Systems

20

add topic UEPMNT345B

Install electronic equipment

40

add topic UEPMNT346B

Maintain electrical equipment

40

add topic UEPMNT347B

Maintain complex electrical equipment

60

add topic UEPMNT348B

Maintain electrical electronic equipment

40

add topic UEPMNT350B

Modify electrical equipment

40

add topic UEPMNT351B

Test and commission electrical equipment

40

add topic UEPMNT352B

Test and commission electronic electrical equipment

40

add topic UEPMNT355B

Install complex electronic/ instrumentation equipment

40

add topic UEPMNT356B

Maintain instrumentation equipment

40

add topic UEPMNT357B

Diagnose and repair faults in instrumentation equipment

60

add topic UEPMNT358B

Modify instrumentation equipment

40

add topic UEPMNT359B

Test and Commission Instrumentation Systems

40

add topic UEPMNT362A

Maintain Wind Turbine Control Systems

60

add topic UEPMNT366A

Maintain power plant inverter systems

60

add topic UEPOPS202B

Apply Quality Systems To Work

20

add topic UEPOPS301B

Conduct Single Energy Source Isolation Procedures for Permit to Work

40

add topic UEPOPS337B

Maintain Quality Systems within the Team

20

Group C Qualification Electives.

At least 240 points to be achieved from this group. You may select all your elective units from this Group

Weighting Points

add topic UEENEEC005B

Estimate electrotechnology projects

40

add topic UEPMNT410B

Diagnose and Repair Faults in Electronic Equipment

60

add topic UEPMNT411B

Diagnose and Repair Faults in Complex Electrical Equipment

60

add topic UEPMNT412B

Modify Complex Electrical Equipment

60

add topic UEPMNT413B

Modify Electronic Electrical Equipment

60

add topic UEPMNT414B

Test and Commission Complex Electrical Equipment

60

add topic UEPMNT415B

Diagnose and Repair Faults in Complex Refrigeration / Air Conditioning Equipment

60

add topic UEPMNT416B

Overhaul Electrical Generators

80

add topic UEPMNT417B

Inspect Electrical Generators and Diagnose Faults

80

add topic UEPMNT421B

Conduct Technical Inspection of Process Plant and Equipment

60

add topic UEPMNT422B

Conduct Performance Testing on Process Plant and Equipment

60

add topic UEPMNT424B

Monitor Efficiency of Thermal Steam Cycle Power Plant

60

add topic UEPMNT425B

Maintain Complex Instrumentation Equipment

80

add topic UEPMNT426B

Maintain Electronic Instrumentation Equipment

80

add topic UEPMNT427B

Diagnose and Repair Faults in Complex Instrumentation Equipment

80

add topic UEPMNT428B

Modify Complex Instrumentation Equipment

80

add topic UEPMNT429B

Modify Electronic Instrumentation Equipment

80

add topic UEPMNT430B

Test and Commission Complex Instrumentation Equipment

80

add topic UEPMNT431B

Test and Commission Electronic Instrumentation Equipment

80

add topic UEPMNT432B

Write Programs for Control Systems

80

add topic UEPMNT433B

Conduct Routine Generation Electrical Maintenance

60

add topic UEPMNT434A

Diagnose and Repair Faults in Wind Turbine Control Systems

80

add topic UEPMNT436A

Test and Commission Wind Turbine Control Systems

80

add topic UEPMNT440A

Diagnose and repair faults in power plant inverter systems

60

add topic UEPMNT441A

Test and commission power plant inverter systems

60

add topic UEPOPS402B

Conduct Multiple Energy Source Isolation Procedures for procedures for a Permit to Work

40

add topic UEPOPS439B

Plan and Organise Work

20

Note:

1. Prerequisite pathways shall be identified and met for all elective units selected.

2. In selecting elective units considerations to career planning advice should be given to units that form part of a prerequisite pathway for the progression to achieve particular competencies or qualification at a higher level.

END OF QUALIFICATION


Pathways...

    Not applicable.


Entry Requirements

Not applicable.


Licensing Information

Not applicable.


Employability Skills

Not applicable.