Scope: This qualification provides competencies to manufacture, fit, assemble, erect, operate, test, fault find, alter, repair electrical equipment, electronic, instrumentation systems, and includes electrical wiring work only if that work is associated with assembling, maintaining, terminating or altering the wiring between electrical components within a power generating plant or machinery. Development of maintenance schedules and project management. Implementation of safe working practices and environmental procedures. Management and supervision of others and coordination of work activities of individuals and/or teams.

Electrical equipment means any appliance, article, accessory, wire, fitting, cable, conduit or apparatus that generates, uses, conveys or controls (or that is intended to generate, use, convey or control) electricity above extra low voltage.

This qualification does not authorise the holder to install any electrical wiring systems within an electrical installation as prescribed by definitions contained in AS/NZS 3000.

Completion requirements:

The requirements for granting this qualification will be met when competency is demonstrated and achieved for:

All the Core competency standard units, defined in the Core Competency Standard Units table below and

A combination of Elective competency standard units to achieve a total weighting of 600 points in accordance with the Elective Competency Standard Units table below.

Core Competency Standard Units

All core competency standard units to be achieved

Weighting Points

UEENEEE101A

Apply Occupational Health and Safety regulations, codes and practices in the workplace

20

UEENEEE102A

Fabricate, dismantle, assemble utilities components

40

UEENEEE104A

Solve problems in d.c. circuits

80

UEENEEE105A

Fix and secure electrotechnology equipment

20

UEENEEE107A

Use drawings, diagrams, schedules, standards, codes and specifications

40

UEENEEE117A

Implement and monitor energy sector OHS policies and procedures

20

UEENEEE137A

Document and apply measures to control OHS risks associated with electrotechnology work

20

UEENEEG006A

Solve problems in single and three phase low voltage machines

80

UEENEEG033A

Solve problems in single and three phase low voltage electrical apparatus and circuits

60

UEENEEG063A

Arrange circuits, control and protection for general electrical installations

40

UEENEEG101A

Solve problems in electromagnetic devices and related circuits

60

UEENEEG102A

Solve problems in low voltage a.c circuits

80

UEENEEG106A

Terminate cables, cords and accessories for low voltage circuits

40

UEENEEG108A

Trouble-shoot and repair faults in low voltage electrical apparatus and circuits

40

UEENEEG109A

Develop and connect electrical control circuits

80

UEPOPS337B

Maintain Quality Systems within the Team

20

UEPOPS338B

Facilitate Effective Workplace Communications

20

UEPOPS371A

Carry out operational checks on in-service electrical plant

40

UEPOPS417B

Monitor and Implement Environmental Plans and Procedures

20

UEPOPS430B

Control permit to work operations

20

UEPOPS439B

Plan and Organise Work

20

UEPOPS501B

Manage Occupational Health and Safety Policy and Procedures

40

UEPOPS507B

Conduct Project Management

60

UEPOPS509B

Manage Quality Control Procedures

40

Total points in core

1000

Elective Competency Standard Units

Complete Elective units to achieve a total of weighting of 600 points from the following groups:

Group

Minimum points

Maximum points

A

Imported and Common Elective Units

Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 5. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points.

0

270

B

Qualification Electives

You may select units from this group for qualification completion.

0

180

C

Qualification Electives

You may select units from this group for qualification completion.

0

240

D

Qualification Electives

You may select all your elective units from this Group

180

540

Group A - Imported and Common Elective Units.

Complete units to a maximum weighting of 270 points

Weighting Points

BSBWOR501B

Manage personal work priorities and professional development

60

BSBMGT502B

Manage people performance

70

BSBMGT515A

Manage operational plan

60

BSBINM501A

Manage an information or knowledge management system

50

BSBCUS501C

Manage quality customer service

40

BSBMGT516C

Facilitate continuous improvement

60

BSBINN502A

Build and sustain an innovative work environment

50

BSBLED501A

Develop a workplace learning environment

60

BSBWOR502B

Ensure team effectiveness

60

BSBOHS509A

Ensure a Safe Workplace

60

Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 5. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points.

Note: For further information see Application of the NQC Flexibility Formula, Page 10, UEP12 ESI Generation Sector Training Package, Part1.1.00

Up to 270

points

Group B Qualification Electives.

Complete units to a maximum weighting of 180 points

Weighting Points

UEPMNT319B

Maintain and Test Fixed Fire Protection Systems

20

UEPMNT345B

Install electronic equipment

40

UEPMNT346B

Maintain electrical equipment

40

UEPMNT347B

Maintain complex electrical equipment

60

UEPMNT348B

Maintain electrical electronic equipment

40

UEPMNT350B

Modify electrical equipment

40

UEPMNT351B

Test and commission electrical equipment

40

UEPMNT352B

Test and commission electronic electrical equipment

40

UEPMNT355B

Install complex/electronic instrumentation equipment

40

UEPMNT356B

Maintain instrumentation equipment

40

UEPMNT357B

Diagnose and repair faults in instrumentation equipment

60

UEPMNT358B

Modify instrumentation equipment

40

UEPMNT359B

Test and Commission Instrumentation Systems

40

UEPMNT361A

Maintain Wind Turbine Mechanical Systems

60

UEPMNT362A

Maintain Wind Turbine Control Systems

60

UEPMNT366A

Maintain power plant inverter systems

60

UEPOPS301B

Conduct Single Energy Source Isolation Procedures for Permit to Work

40

Group C Qualification Electives.

Complete units to a maximum weighting of 240 points

Weighting Points

UEENEEC005B

Estimate electrotechnology projects

40

UEENEEE124A

Compile and produce an energy sector report

60

UEPMNT410B

Diagnose and Repair Faults in Electronic Equipment

60

UEPMNT411B

Diagnose and Repair Faults in Complex Electrical Equipment

60

UEPMNT412B

Modify Complex Electrical Equipment

60

UEPMNT413B

Modify Electronic Electrical Equipment

60

UEPMNT414B

Test and Commission Complex Electrical Equipment

60

UEPMNT415B

Diagnose and Repair Faults in Complex Refrigeration / Air Conditioning Equipment

60

UEPMNT416B

Overhaul Electrical Generators

80

UEPMNT417B

Inspect Electrical Generators and Diagnose Faults

80

UEPMNT421B

Conduct Technical Inspection of Process Plant and Equipment

60

UEPMNT422B

Conduct Performance Testing on Process Plant and Equipment

60

UEPMNT424B

Monitor Efficiency of Thermal Steam Cycle Power Plant

60

UEPMNT425B

Maintain Complex Instrumentation Equipment

80

UEPMNT426B

Maintain Electronic Instrumentation Equipment

80

UEPMNT427B

Diagnose and Repair Faults in Complex Instrumentation Equipment

80

UEPMNT428B

Modify Complex Instrumentation Equipment

80

UEPMNT429B

Modify Electronic Instrumentation Equipment

80

UEPMNT430B

Test and Commission Complex Instrumentation Equipment

80

UEPMNT431B

Test and Commission Electronic Instrumentation Equipment

80

UEPOPS402B

Conduct Multiple Energy Source Isolation Procedures for procedures for a Permit to Work

40

UEPOPS440B

Coordinate Team Activities

20

Group D Qualification Electives.

You must complete units to a minimum weighting of 180. You may select units to a maximum weighting of 540.

Weighting Points

UEPMNT501B

Diagnose and Repair Faults in Electrical and Electronic Systems

100

UEPMNT502B

Test and Commission Electronic Electrical Systems

100

UEPMNT503B

Diagnose and Repair Faults in Instrumentation Systems

100

UEPMNT504B

Test and Commission Instrumentation Systems

100

UEPOPS508B

Manage Commissioning/Decommissioning

80

UEPOPS511B

Tune Process Plant and Equipment

60