Certificate IV in ESI - Power Systems Network Infrastructure

Scope:

This qualification provides competencies to select, install, set up, test, fault find, repair and maintain electrical systems and equipment in building and premises. It includes ERAC requirements for an ‘Electrician’s licence’. It’s also provide acquire skills and knowledge needed for a career in installation and maintenance of network infrastructure, namely, Transmission, Distribution or Rail Traction in the Electricity Supply Industry.


Subjects

Completion requirements:

The requirements for granting this qualification will be met when competency is demonstrated and achieved for:

All the Core competency standard units, defined in the Core Competency Standard Units table below and

A combination of Elective competency standard units to achieve a total weighting of 340 points in accordance with the Elective Competency Standard Units table below.

All the required prerequisite competency standard units have been met.

Core Units All to be completed

Weighting Points

add topic UEENEEE101A

Apply Occupational Health Safety regulations, codes and practices in the workplace

20

add topic UEENEEE102A

Fabricate, dismantle, assemble utilities components

40

add topic UEENEEE104A

Solve problems in d.c. circuits

80

add topic UEENEEE105A

Fix and secure electrotechnology equipment

20

add topic UEENEEE107A

Use drawings, diagrams, schedules, standards, cords and specifications

40

add topic UEENEEE137A

Document and apply measures to control OHS risks associated with electrotechnology work

20

add topic UEENEEG006A

Solve problems in single and three phase low voltage machines

80

add topic UEENEEG033A

Solve problems in single and three phase low voltage electrical apparatus and circuits

60

add topic UEENEEG063A

Arrange circuits, control and protection for general electrical installations

40

add topic UEENEEG101A

Solve problems in electromagnetic devices and related circuits

60

add topic UEENEEG102A

Solve problems in low voltage a.c. circuits

80

add topic UEENEEG103A

Install low voltage wiring and accessories

20

add topic UEENEEG104A

Install appliances, switchgear and associated accessories for low voltage electrical installations

20

add topic UEENEEG105A

Verify compliance and functionality of low voltage general electrical installations

40

add topic UEENEEG106A

Terminate cables, cords and accessories for low voltage circuits

40

add topic UEENEEG107A

Select wiring systems and cables for low voltage general electrical installations

60

add topic UEENEEG108A

Trouble-shoot and repair faults in low voltage electrical apparatus and circuits

40

add topic UEENEEG109A

Develop and connect electrical control circuits

80

add topic UEENEEK142A

Apply environmentally and sustainable procedures in the energy sector

20

add topic UETTDREL16A

Working safely near live electrical apparatus

20

add topic UETTDRIS62A

Implement and monitor the power systems organisational OHS policies, procedures and programs

30

add topic UETTDRIS63A

Implement and monitor power systems environmental and sustainable energy management policies and procedures

30

Total points in core

940

Elective Competency Standard Units

At least a weighting of 340 points to be achieved. Must achieve at least 200 points from Group C

Group

Rules

Minimum points

Maximum points

A

Imported and Common Elective Units

Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 4. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points.

0

50

B

Qualification Electives

You may select units from this group to a maximum weighting of 140 points

0

140

C

Qualification Electives

At least 200 points to be achieved from this group. You may select all your elective units from this Group.

200

340

Group A Imported and Common Elective Units

You may select units from this group to a maximum weighting of 50 points

Weighting Points

add topic BSBWOR401A

Implement effective workplace relationships

50

add topic BSBMGT402A

Implement operational plan

40

add topic BSBINM401A

Implement workplace information system

40

add topic BSBMGT403A

Implement continuous improvement

40

add topic BSBWOR402A

Promote team effectiveness

50

Imported units from other training packages and/or state accredited courses can be added to this group, but they must be selected from qualifications where the unit is first packaged at AQF level 4. If units have not being assigned a weighting by the relevant EE-Oz Industry Technical Advisory Committee, their weighting will be 10 points.

Note: For further information see Application of the NQC Flexibility Formula, Page 10, UET12 Electricity Supply Industry Transmission, Distribution and Rail Sector Training Package, Version 1, Volume 1 Qualification Framework.

Up to 50 Points

Group B You may select units from this group to a maximum weighting of 140 points

Weighting Points

add topic UEENEEG171A

Install, set up and commission interval metering

20

add topic UETTDRIS43A

Perform low voltage field switching operation to a given schedule.

50

add topic UETTDRIS44A

Perform HV field switching operation to a given schedule

50

add topic UETTDRIS47A

Sample, test, filter and reinstate insulating oil

40

add topic UETTDRIS67A

Solve problems in energy supply network equipment

80

add topic UETTDRIS68A

Solve problems in energy supply network protection equipment and systems

40

add topic UETTDRSB39A

Perform power system substation switching operation to a given schedule

50

Group C At least 200 points to be achieved from this group.

You may select all your elective units from this Group.

Weighting Points

add topic UEENEEG076A

Install and replace low voltage current transformer metering

20

add topic UETTDRCJ33A

Install and maintain network infrastructure LV underground cables

40

add topic UETTDRCJ34A

Install and maintain network infrastructure HV underground cables

50

add topic UETTDRDP15A

Inspect, maintain and restore energised low voltage overhead distribution network infrastructure

50

add topic UETTDRIS45A

Install and maintain ESI overhead distribution network infrastructure

40

add topic UETTDRIS46A

Install and maintain ESI network infrastructure electrical equipment

40

add topic UETTDRIS48A

Develop high voltage switching schedule

40

add topic UETTDRIS49A

Develop low voltage switching schedule

40

add topic UETTDRIS50A

Coordinate power system permit procedures

40

add topic UETTDRIS51A

Coordinate and direct power system switching schedules

40

add topic UETTDRRT34A

Install and maintain traction network wiring systems

40

add topic UETTDRRT35A

Install and maintain traction network equipment and components

40

add topic UETTDRRT36A

Maintain traction network wiring systems

40

add topic UETTDRRT37A

Maintain traction network components and equipment

40

add topic UETTDRTP34A

Install/maintain overhead transmission network infrastructure

40

add topic UETTDRTP35A

Install/maintain transmission network infrastructure electrical equipment

40

add topic UETTDRTS37A

Perform current injection testing using phantom load

40

add topic UETTDRTS38A

Install and replace high voltage metering and associated equipment

40

Note:
1. Prerequisite pathways shall be identified and met for all elective units selected.

END OF QUALIFICATION


Pathways...

    Not applicable.


Entry Requirements

Not applicable.


Licensing Information

Not applicable.


Employability Skills

Not applicable.