Change log for PMB
PMB unit update log
- PMBTECH407E
- Produce composite products using cored-laminate techniques, updated 2021-04-09
- PMBPROD243E
- Cut rubber materials, updated 2021-04-09
- PMBPROD235E
- Use materials and process knowledge to complete work operations, updated 2021-04-09
- PMBPROD326E
- Inspect tyres, updated 2021-02-18
- PMBPROD265E
- Operate portable vulcanising equipment, updated 2021-02-18
- PMBPROD337E
- Prepare heavy off-the-road tyres for repair, updated 2021-02-18
- PMBPROD206E
- Operate ancillary equipment, updated 2021-02-18
- PMBPROD247E
- Create composite laminates using hand lay-up techniques, updated 2021-02-18
- PMBFIN202E
- Fit attachments and assemble components for customised polymer products, updated 2021-02-18
- PMBTECH403E
- Test thermoset composite laminates and materials, updated 2021-02-18
- PMBPROD245E
- Fabricate products with rubber or plastics, updated 2021-02-18
- PMBPREP201E
- Prepare moulds for composites production, updated 2021-02-18
- PMBPROD213E
- Operate polymer extruders, updated 2021-02-18
- PMBPROD304E
- Wind up wire or belts, updated 2021-02-18
- PMBPROD347E
- Mould composites products using hand lay-up techniques, updated 2021-02-18
- PMBPROD248E
- Prepare surfaces for coating, updated 2021-02-18
- PMBPROD362E
- Produce polyurethane products using gravity casting, updated 2021-02-18
- PMBPROD236E
- Operate hand-held air or power equipment for production processes, updated 2021-02-18
- PMBFIN203E
- Rework product imperfections, updated 2021-02-18
- PMBPROD301E
- Draw wire, updated 2021-02-18
- PMBTECH601E
- Develop a new product, updated 2021-02-18
- PMBTECH401E
- Predict polymer properties and characteristics, updated 2021-02-18
- PMBPROD352E
- Produce compounded materials, updated 2021-02-18
- PMBPREP301E
- Set up and prepare for batch production, updated 2021-02-18
- PMBPROD209E
- Operate cable winding equipment, updated 2021-02-18
- PMBPROD216E
- Operate blown film equipment, updated 2021-02-18
- PMBTECH602E
- Develop a new die or tool, updated 2021-02-18
- PMBPROD330E
- Make moulds for thermoformed products, updated 2021-02-18
- PMBPREP205E
- Assemble materials and equipment for production, updated 2021-02-18
- PMBPROD241E
- Install rubber lining or pulley lagging using lay-up techniques, updated 2021-02-18
- PMBPROD328E
- Produce sheet-fed vacuum-formed products, updated 2021-02-18
- PMBWELD305E
- Install polyethylene plastic pipelines for pressurised applications, updated 2021-02-18
- PMBPROD325E
- Lay on tyre retreads, updated 2021-02-18
- PMBPROD221E
- Operate rotational moulding equipment, updated 2021-02-18
- PMBTECH502E
- Analyse production trials, updated 2021-02-18
- PMBTECH406E
- Diagnose production equipment problems, updated 2021-02-18
- PMBPROD339E
- Produce steel cord-reinforced conveyor belts, updated 2021-02-18
- PMBPROD375E
- Vulcanise products using an autoclave, updated 2021-02-18
- PMBPROD380E
- Produce composites products using mechanised open mould wet lay-up, updated 2021-02-18
- PMBHAN103E
- Shift materials safely by hand, updated 2021-02-18
- PMBPROD370E
- Produce injection blow moulded products, updated 2021-02-18
- PMBFIN201E
- Finish components and products, updated 2021-02-18
- PMBPROD254E
- Operate an open mill blender, updated 2021-02-18
- PMBTECH507E
- Develop fibre-composite products using cored-laminate techniques, updated 2021-02-18
- PMBPROD378E
- Splice solid woven conveyor belts, updated 2021-02-18
- PMBPROD316E
- Produce blown film, updated 2021-02-18
- PMBPREP303E
- Set up equipment for continuous operation, updated 2021-02-18
- PMBTECH506E
- Analyse the design of products and tools for polymer injection moulding, updated 2021-02-18
- PMBPREP305E
- Change extrusion die and calibrator, updated 2021-02-18
- PMBWELD302E
- Join polyethylene plastic pipelines using electrofusion welding, updated 2021-02-18
- PMBTECH404E
- Mould composites with chemically-resistant or fire-retardant properties, updated 2021-02-18
- PMBPROD356E
- Construct moulds for composite products, updated 2021-02-18
- PMBPROD311E
- Produce blow moulded products, updated 2021-02-18
- PMBTECH505E
- Choose polymer materials for an application, updated 2021-02-18
- PMBFIN205E
- Hand decorate products, updated 2021-02-18
- PMBPROD431E
- Trial a new production mould assembly, updated 2021-02-18
- PMBPROD368E
- Repair conveyor belt carcasses, updated 2021-02-18
- PMBPROD430E
- Trial a new injection moulding die, updated 2021-02-18
- PMBWELD308E
- Install PVC plastic pipelines for pressurised applications, updated 2021-02-18
- PMBPROD390E
- Produce composites using filament winding, updated 2021-02-18
- PMBPROD377E
- Splice fabric ply conveyor belts, updated 2021-02-18
- PMBTECH509E
- Modify an existing product, updated 2021-02-18
- PMBPROD310E
- Produce injection moulded products, updated 2021-02-18
- PMBPROD340E
- Cure heavy off-the-road tyre repairs, updated 2021-02-18
- PMBTECH301E
- Optimise polymer processing operations, updated 2021-02-18
- PMBTECH405E
- Repair damaged fibre-composites structures, updated 2021-02-18
- PMBPROD282E
- Reassemble production mould components, updated 2021-02-18
- PMBPROD398E
- Produce composites using prepregs, updated 2021-02-18
- PMBPROD280E
- Operate a chopper gun to lay-up composites, updated 2021-02-18
- PMBPROD338E
- Repair heavy off-the-road tyres, updated 2021-02-18
- PMBPROD210E
- Operate injection moulding equipment, updated 2021-02-18
- PMBPROD239E
- Build fabric-reinforced conveyor belts, updated 2021-02-18
- PMBPROD357E
- Construct jigs and fixtures, updated 2021-02-18
- PMBPROD300E
- Produce products, updated 2021-02-18
- PMBPROD360E
- Produce polyurethane products using centrifugal casting, updated 2021-02-18
- PMBWELD304E
- Design polyethylene plastic pipelines for non-pressure drainage, updated 2021-02-18
- PMBPROD391E
- Produce composites using resin infusion, updated 2021-02-18
- PMBPROD253E
- Operate an internal mill blender, updated 2021-02-18
- PMBPROD242E
- Bond polymers to surfaces, updated 2021-02-18
- PMBPROD355E
- Make pattern or plug for composites moulds, updated 2021-02-18
- PMBPROD251E
- Apply gel coat or other polymer surface finish, updated 2021-02-18
- PMBPROD249E
- Apply liquid surface coatings, updated 2021-02-18
- PMBPROD240E
- Cut plastic materials, updated 2021-02-18
- PMBPROD376E
- Splice steel cord conveyor belts, updated 2021-02-18
- PMBPROD321E
- Produce rotational moulded products, updated 2021-02-18
- PMBPROD246E
- Hand mix materials, updated 2021-02-18
- PMBTECH303E
- Make minor modifications to products, updated 2021-02-18
- PMBPROD238E
- Perform creel rack operations for belting production, updated 2021-02-18
- PMBPROD293E
- Create composite laminates using vacuum-assisted closed-moulding processes, updated 2021-02-18
- PMBPROD306E
- Prepare and start equipment for production, updated 2021-02-18
- PMBPROD369E
- Repair conveyor belt covers, updated 2021-02-18
- PMBPROD385E
- Program computer-controlled equipment, updated 2021-02-18
- PMBPROD392E
- Produce thermoset composites using pultrusion, updated 2021-02-18
- PMBWELD306E
- Design polyethylene plastic pipelines for pressurised applications, updated 2021-02-18
- PMBWELD310E
- Design PVC plastic pipelines for pressure applications, updated 2021-02-18
- PMBPROD261E
- Operate continuous vulcanising equipment, updated 2021-02-18
- PMBPROD358E
- Develop polymer product patterns, updated 2021-02-18
- PMBTECH402E
- Set advanced or complex injection moulding dies, updated 2021-02-18
- PMBTECH501E
- Analyse equipment performance, updated 2021-02-18
- PMBTECH302E
- Modify existing compounds, updated 2021-02-18
- PMBWELD307E
- Install plastic pipelines for high temperature applications, updated 2021-02-18
- PMBPROD308E
- Take a machine out of production, updated 2021-02-18
- PMBPROD252E
- Operate polymer compounding equipment, updated 2021-02-18
- PMBWELD301E
- Join polyethylene plastic pipelines using butt welding, updated 2021-02-18
- PMBPROD394E
- Produce composites using resin transfer moulding, updated 2021-02-18
- PMBPROD336E
- Inspect heavy off-the-road tyres, updated 2021-02-18
- PMBWELD311E
- Design plastic pipelines for high temperature and pressure applications, updated 2021-02-18
- PMBPROD207E
- Operate rubber calendering equipment, updated 2021-02-18
- PMBPROD313E
- Produce extruded polymer products, updated 2021-02-18
- PMBPROD367E
- Remove and replace conveyor belts, updated 2021-02-18
- PMBPROD303E
- Produce cable and tape lay-up cables, updated 2021-02-18
- PMBPREP304E
- Set a die for injection moulding production, updated 2021-02-18
- PMBTECH508E
- Develop a new compound, updated 2021-02-18
- PMBPROD287E
- Weld thermoplastics materials, updated 2021-02-18
- PMBPREP206E
- Prepare polymer materials to specified formulae, updated 2021-02-18
- PMBPROD255E
- Operate polymer mixing equipment, updated 2021-02-18
- PMBPROD281E
- Finish composite products, updated 2021-02-18
- PMBPROD302E
- Bunch and strand wire, updated 2021-02-18
- PMBWELD303E
- Install polyethylene plastic pipelines for non-pressure drainage, updated 2021-02-18
- PMBPROD283E
- Demould polymer products, updated 2021-02-18
- PMBPROD393E
- Produce composites using vacuum bagging, updated 2021-02-18
- PMBPROD384E
- Operate multi-axis router, updated 2021-02-18
- PMBWELD309E
- Weld plastic using extrusion techniques, updated 2021-02-18
- PMBPROD343E
- Shut down plant area, updated 2021-02-18
- PMBPROD217E
- Operate printing equipment, updated 2021-02-18
- PMBPROD307E
- Produce calendered rubber or vinyl products, updated 2021-02-18
- PMBTECH603E
- Design structural or mechanical polymer components, updated 2021-02-18
- PMBPROD341E
- Finish heavy off-the-road tyre repairs, updated 2021-02-18
- PMBTECH406
- Diagnose production equipment problems, updated 2019-10-14
- PMBPROD270
- Operate injection blow moulding equipment, updated 2019-10-14
- PMBPROD211
- Operate blow moulding equipment, updated 2019-10-14
- PMBPROD336
- Inspect heavy off-the-road tyres, updated 2019-10-14
- PMBWASTE302
- Coordinate waste disposal, updated 2016-12-07
- PMBWELD310
- Design PVC plastic pressure pipelines, updated 2016-11-08
- PMBWELD311
- Design high temperature plastic pressure pipelines, updated 2016-11-08
- PMBWELD309
- Weld plastic using extrusion techniques, updated 2016-11-08
- PMBWELD308
- Install PVC plastic pressure pipelines, updated 2016-11-08
- PMBWELD307
- Install high temperature plastic pressure pipelines, updated 2016-11-08
- PMBWELD306
- Design polyethylene plastic pressure pipelines, updated 2016-11-08
- PMBWELD303
- Install polyethylene (non-pressure) drainage pipelines, updated 2016-11-08
- PMBWELD305
- Install polyethylene plastic pressure pipelines, updated 2016-11-08
- PMBWELD304
- Design polyethylene (non-pressure) drainage pipelines, updated 2016-11-08
- PMBWELD301
- Butt weld polyethylene plastic pipelines, updated 2016-11-08
- PMBWELD302
- Electrofusion weld polyethylene pipelines, updated 2016-11-08
- PMBTECH603
- Design structural/mechanical polymer components, updated 2016-11-08
- PMBWASTE101
- Collect waste for recycling or safe disposal, updated 2016-11-08
- PMBTECH602
- Develop a new die or tool, updated 2016-11-08
- PMBTECH601
- Develop a new product, updated 2016-11-08
- PMBTECH509
- Modify an existing product, updated 2016-11-08
- PMBTECH510
- Analyse failure in polymeric materials, updated 2016-11-08
- PMBTECH507
- Develop fibre-composite products using cored-laminate techniques, updated 2016-11-08
- PMBTECH508
- Develop a new compound, updated 2016-11-08
- PMBTECH506
- Analyse the design of products and tools, updated 2016-11-08
- PMBTECH504
- Determine heat transfer loads for processing equipment, updated 2016-11-08
- PMBTECH505
- Choose polymer materials for an application, updated 2016-11-08
- PMBTECH503
- Determine rheology and output of plastics materials from processing equipment, updated 2016-11-08
- PMBTECH501
- Analyse equipment performance, updated 2016-11-08
- PMBTECH502
- Review and analyse production trials and specify retrials, updated 2016-11-08
- PMBTECH405
- Repair damaged fibre-composites structures, updated 2016-11-08
- PMBTECH404
- Mould chemical resistant and/or fire retardant fibre-composites, updated 2016-11-08
- PMBTECH303
- Make minor modifications to products, updated 2016-11-08
- PMBTECH402
- Set advanced or complex dies, updated 2016-11-08
- PMBTECH401
- Predict polymer properties and characteristics, updated 2016-11-08
- PMBTECH403
- Test fibre-composites materials and laminates, updated 2016-11-08
- PMBTECH302
- Modify existing compounds, updated 2016-11-08
- PMBTECH301
- Use material and process knowledge to solve problems, updated 2016-11-08
- PMBPROD431
- Trial a new, advanced or complex mould, updated 2016-11-08
- PMBPROD430
- Trial a new die/tool, updated 2016-11-08
- PMBPROD395
- Produce composite sheet products, updated 2016-11-08
- PMBPROD398
- Produce composites using pre-pregs, updated 2016-11-08
- PMBPROD397
- Produce composites using moulding compounds, updated 2016-11-08
- PMBPROD396
- Produce composites using centrifugal casting, updated 2016-11-08
- PMBPROD394
- Produce composites using resin transfer moulding, updated 2016-11-08
- PMBPROD393
- Produce composites using vacuum bagging, updated 2016-11-08
- PMBPROD391
- Produce composites using resin infusion, updated 2016-11-08
- PMBPROD390
- Produce composites using filament winding, updated 2016-11-08
- PMBPROD384
- Operate multi-axis router, updated 2016-11-08
- PMBPROD387
- Produce welded plastics materials, updated 2016-11-08
- PMBPROD392
- Produce composites using pultrusion, updated 2016-11-08
- PMBPROD385
- Program computer controlled equipment, updated 2016-11-08
- PMBPROD380
- Produce composites using chopper gun/depositor, updated 2016-11-08
- PMBPROD376
- Splice steel cord conveyor belts, updated 2016-11-08
- PMBPROD378
- Splice solid woven conveyor belts, updated 2016-11-08
- PMBPROD377
- Splice fabric ply conveyor belts, updated 2016-11-08
- PMBPROD373
- Draw optical fibre, updated 2016-11-08
- PMBPROD372
- Produce fibre optic preforms, updated 2016-11-08
- PMBPROD375
- Vulcanise products using an autoclave, updated 2016-11-08
- PMBPROD370
- Produce injection blow moulded products, updated 2016-11-08
- PMBPROD367
- Remove and replace conveyor belts, updated 2016-11-08
- PMBPROD368
- Repair conveyor belt carcass, updated 2016-11-08
- PMBPROD362
- Produce gravity cast polyurethane products, updated 2016-11-08
- PMBPROD369
- Repair conveyor belt covers, updated 2016-11-08
- PMBPROD358
- Develop patterns, updated 2016-11-08
- PMBPROD360
- Produce centrifugally cast polyurethane products, updated 2016-11-08
- PMBPROD356
- Construct moulds for composite products, updated 2016-11-08
- PMBPROD357
- Construct jigs and fixtures, updated 2016-11-08
- PMBPROD355
- Make pattern/plug for composites moulds, updated 2016-11-08
- PMBPROD354
- Compound materials using an open mill blender, updated 2016-11-08
- PMBPROD352
- Produce compounded materials, updated 2016-11-08
- PMBPROD353
- Compound materials using an internal mill blender, updated 2016-11-08
- PMBPROD349
- Produce liquid surface coated products, updated 2016-11-08
- PMBPROD347
- Produce composites using hand lamination, updated 2016-11-08
- PMBPROD340
- Cure heavy off-the-road tyre repairs, updated 2016-11-08
- PMBPROD343
- Shut down plant area, updated 2016-11-08
- PMBPROD341
- Finish heavy off-the-road tyre repairs, updated 2016-11-08
- PMBPROD338
- Repair heavy off-the-road tyres, updated 2016-11-08
- PMBPROD339
- Produce reinforced conveyor belts, updated 2016-11-08
- PMBPROD337
- Prepare heavy off-the-road tyres for repair, updated 2016-11-08
- PMBPROD333
- Convert plastic film, updated 2016-11-08
- PMBPROD331
- Produce printed and decorated film, updated 2016-11-08
- PMBPROD334
- Produce products using twin screw extruders, updated 2016-11-08
- PMBPROD332
- Produce thermally bent products, updated 2016-11-08
- PMBPROD330
- Make moulds for formed products, updated 2016-11-08
- PMBPROD329
- Produce polystyrene shape moulded products, updated 2016-11-08
- PMBPROD328
- Produce sheet feed vacuum forming products, updated 2016-11-08
- PMBPROD326
- Inspect tyres, updated 2016-11-08
- PMBPROD325
- Lay on tyre retreads, updated 2016-11-08
- PMBPROD324
- Inspect tyres for retreading, updated 2016-11-08
- PMBPROD320
- Produce foam injected mouldings, updated 2016-11-08
- PMBPROD323
- Produce powder coated products, updated 2016-11-08
- PMBPROD321
- Produce rotational moulded products, updated 2016-11-08
- PMBPROD319
- Build up rollers, updated 2016-11-08
- PMBPROD316
- Produce blown film, updated 2016-11-08
- PMBPROD314
- Produce compression moulded products, updated 2016-11-08
- PMBPROD317
- Print and decorate rigid products, updated 2016-11-08
- PMBPROD315
- Produce polyurethane foam, updated 2016-11-08
- PMBPROD312
- Produce continuous thermoforming products, updated 2016-11-08
- PMBPROD313
- Produce extruded products, updated 2016-11-08
- PMBPROD311
- Produce blow moulded products, updated 2016-11-08
- PMBPROD310
- Produce injection moulded products, updated 2016-11-08
- PMBPROD309
- Produce electroplated products, updated 2016-11-08
- PMBPROD308
- Take a machine out of production, updated 2016-11-08
- PMBPROD306
- Prepare and start equipment for production, updated 2016-11-08
- PMBPROD307
- Produce calendered products, updated 2016-11-08
- PMBPROD305
- Colour optical fibre, updated 2016-11-08
- PMBPROD304
- Wind products onto drums, updated 2016-11-08
- PMBPROD303
- Lay up and tape cables, updated 2016-11-08
- PMBPROD301
- Draw wire, updated 2016-11-08
- PMBPROD302
- Bunch and strand wire, updated 2016-11-08
- PMBPROD300
- Produce products, updated 2016-11-08
- PMBPROD298
- Operate equipment using pre-preg material, updated 2016-11-08
- PMBPROD297
- Operate equipment using moulding compounds, updated 2016-11-08
- PMBPROD296
- Operate centrifugal casting equipment, updated 2016-11-08
- PMBPROD295
- Operate composite sheeting equipment, updated 2016-11-08
- PMBPROD291
- Operate resin infusion moulding equipment, updated 2016-11-08
- PMBPROD290
- Operate filament winding equipment, updated 2016-11-08
- PMBPROD293
- Operate vacuum bagging equipment, updated 2016-11-08
- PMBPROD292
- Operate pultrusion equipment, updated 2016-11-08
- PMBPROD294
- Operate resin transfer moulding equipment, updated 2016-11-08
- PMBPROD287
- Weld plastics materials, updated 2016-11-08
- PMBPROD285
- Operate computer controlled equipment, updated 2016-11-08
- PMBPROD283
- Demould product, updated 2016-11-08
- PMBPROD281
- Finish composite products, updated 2016-11-08
- PMBPROD280
- Operate resin-glass depositor equipment, updated 2016-11-08
- PMBPROD282
- Assemble mould, updated 2016-11-08
- PMBPROD284
- Operate open flame moulding equipment, updated 2016-11-08
- PMBPROD268
- Operate bead coiling equipment, updated 2016-11-08
- PMBPROD267
- Operate steel cutting equipment, updated 2016-11-08
- PMBPROD265
- Operate portable vulcanising equipment, updated 2016-11-08
- PMBPROD263
- Operate retread curing equipment, updated 2016-11-08
- PMBPROD266
- Prepare tyre casings for retreading, updated 2016-11-08
- PMBPROD262
- Operate tyre curing equipment, updated 2016-11-08
- PMBPROD259
- Operate granulating equipment, updated 2016-11-08
- PMBPROD255
- Operate mixing equipment, updated 2016-11-08
- PMBPROD261
- Operate continuous vulcanising equipment, updated 2016-11-08
- PMBPROD253
- Operate an internal mill blender, updated 2016-11-08
- PMBPROD254
- Operate an open mill blender, updated 2016-11-08
- PMBPROD252
- Operate compounding equipment, updated 2016-11-08
- PMBPROD247
- Hand lay up composites, updated 2016-11-08
- PMBPROD249
- Apply liquid surface coatings, updated 2016-11-08
- PMBPROD251
- Apply gel coat or other polymer surface finish, updated 2016-11-08
- PMBPROD248
- Prepare surfaces for coating, updated 2016-11-08
- PMBPROD246
- Hand mix materials, updated 2016-11-08
- PMBPROD245
- Fabricate materials, updated 2016-11-08
- PMBPROD242
- Bond polymers to surfaces, updated 2016-11-08
- PMBPROD238
- Perform creel rack operations, updated 2016-11-08
- PMBPROD240
- Cut materials, updated 2016-11-08
- PMBPROD237
- Splice cables, updated 2016-11-08
- PMBPROD241
- Lay up rubber lining or lag pulleys, updated 2016-11-08
- PMBPROD236
- Operate hand held air/power equipment for production processes, updated 2016-11-08
- PMBPROD239
- Build reinforced conveyor belts, updated 2016-11-08
- PMBPROD235
- Use materials and process knowledge to complete work operations, updated 2016-11-08
- PMBPROD233
- Operate film conversion equipment, updated 2016-11-08
- PMBPROD217
- Operate printing equipment, updated 2016-11-08
- PMBPROD229
- Operate polystyrene shape moulding equipment, updated 2016-11-08
- PMBPROD221
- Operate rotational moulding equipment, updated 2016-11-08
- PMBPROD213
- Operate extruders, updated 2016-11-08
- PMBPROD216
- Operate blown film equipment, updated 2016-11-08
- PMBPROD212
- Operate thermoforming equipment, updated 2016-11-08
- PMBPROD210
- Operate injection moulding equipment, updated 2016-11-08
- PMBPROD209
- Operate cable winding equipment, updated 2016-11-08
- PMBPROD207
- Operate calender, updated 2016-11-08
- PMBPREP305
- Change extrusion die and setup, updated 2016-11-08
- PMBPROD206
- Operate ancillary equipment, updated 2016-11-08
- PMBPREP301
- Set up and prepare for production, updated 2016-11-08
- PMBPREP304
- Set a die, updated 2016-11-08
- PMBPREP303
- Set up equipment for continuous operation, updated 2016-11-08
- PMBPREP206
- Prepare materials to formulae, updated 2016-11-08
- PMBPREP205
- Assemble materials and equipment for production, updated 2016-11-08
- PMBPREP201
- Prepare moulds for composites production, updated 2016-11-08
- PMBHAN208
- Store products, updated 2016-11-08
- PMBFIN205
- Hand decorate products, updated 2016-11-08
- PMBHAN103
- Shift materials safely by hand, updated 2016-11-08
- PMBFIN203
- Repair product imperfections, updated 2016-11-08
- PMBFIN201
- Finish products and components, updated 2016-11-08
- PMBFIN202
- Fit attachments to products, updated 2016-11-08