Unit of Competency Mapping – Information for Teachers/Assessors – Information for Learners

AHCLSC306 Mapping and Delivery Guide
Implement a paving project

Version 1.0
Issue Date: April 2024


Qualification -
Unit of Competency AHCLSC306 - Implement a paving project
Description
Employability Skills
Learning Outcomes and Application This unit of competency describes the skills and knowledge required to install and construct a paved surface to a prepared base within a documented scope of works incorporated in a project across a range of situations and environments.This unit applies to individuals who take responsibility for their own work and for the quality of the work of others. They use discretion and judgement in the selection, allocation and use of available resources. All work is carried out to comply with workplace procedures.No occupational licensing, legislative or certification requirements are known to apply to this unit at the time of publication.
Duration and Setting X weeks, nominally xx hours, delivered in a classroom/online/blended learning setting.

Assessors must satisfy current standards for RTOs.
Prerequisites/co-requisites
Competency Field
Development and validation strategy and guide for assessors and learners Student Learning Resources Handouts
Activities 		Slides
PPT 		Assessment 1 Assessment 2 Assessment 3 Assessment 4
Elements of Competency Performance Criteria              
Element: Prepare for paving project
  • Clarify the requirements of the paving project
  • Select and use tools, equipment and machinery and check for serviceability
  • Identify workplace health and safety hazards, assess risks and implement controls
  • Identify and ameliorate environmental impacts of proposed works
  • Select, use and maintain personal protective equipment (PPE)
  • Organise delivery of materials to site according to workplace priorities
       
Element: Set out and prepare the site
  • Erect site bunting, control pedestrian access and place safety signage
  • Locate services
  • Make provision for irrigation lines to cross paved areas
  • Mark out the paving pattern according to plans and specifications
  • Place and compact sub-base material to the required finished levels
  • Incorporate surface drainage as specified
       
Element: Implement paving project
  • Construct paving
  • Install appropriate drainage
  • Use tools, equipment and machinery safety in accordance with enterprise safe operating procedures and work health and safety requirements
       
Element: Check quality of work and clean-up site
  • Inspect the quality of finished works to ensure they have met the required drawings and specifications standards
  • Clean work-site and dispose of debris in an environmentally safe and sensitive manner
  • Clean, maintain and store tools and equipment
       


Evidence Required

List the assessment methods to be used and the context and resources required for assessment. Copy and paste the relevant sections from the evidence guide below and then re-write these in plain English.

Element

Performance criteria

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Prepare for paving project

1.1 Clarify the requirements of the paving project

1.2 Select and use tools, equipment and machinery and check for serviceability

1.3 Identify workplace health and safety hazards, assess risks and implement controls

1.4 Identify and ameliorate environmental impacts of proposed works

1.5 Select, use and maintain personal protective equipment (PPE)

1.6 Organise delivery of materials to site according to workplace priorities

2. Set out and prepare the site

2.1 Erect site bunting, control pedestrian access and place safety signage

2.2 Locate services

2.3 Make provision for irrigation lines to cross paved areas

2.4 Mark out the paving pattern according to plans and specifications

2.5 Place and compact sub-base material to the required finished levels

2.6 Incorporate surface drainage as specified

3. Implement paving project

3.1 Construct paving

3.2 Install appropriate drainage

3.3 Use tools, equipment and machinery safety in accordance with enterprise safe operating procedures and work health and safety requirements

4. Check quality of work and clean-up site

4.1 Inspect the quality of finished works to ensure they have met the required drawings and specifications standards

4.2 Clean work-site and dispose of debris in an environmentally safe and sensitive manner

4.3 Clean, maintain and store tools and equipment

The candidate must be assessed on their ability to integrate and apply the performance requirements of this unit in a workplace setting. Performance must be demonstrated consistently over time and in a suitable range of contexts.

The candidate must provide evidence that they can:

determine project requirements from plans

calculate material and resource requirements

organise work and use tools and equipment

use tools and equipment to construct paving

clean up, store and maintain tools, machinery and equipment

The candidate must demonstrate knowledge of:

the principles and practices of paving

landscape paving materials

methods and practices for maintaining and repairing paved areas

methods of work schedule programming

set-out techniques

the range and use of required materials, equipment and machinery

Submission Requirements

List each assessment task's title, type (eg project, observation/demonstration, essay, assignment, checklist) and due date here

Assessment task 1: [title]      Due date:

(add new lines for each of the assessment tasks)

Assessment Tasks

Copy and paste from the following data to produce each assessment task. Write these in plain English and spell out how, when and where the task is to be carried out, under what conditions, and what resources are needed. Include guidelines about how well the candidate has to perform a task for it to be judged satisfactory.

Element

Performance criteria

Elements describe the essential outcomes.

Performance criteria describe the performance needed to demonstrate achievement of the element.

1. Prepare for paving project

1.1 Clarify the requirements of the paving project

1.2 Select and use tools, equipment and machinery and check for serviceability

1.3 Identify workplace health and safety hazards, assess risks and implement controls

1.4 Identify and ameliorate environmental impacts of proposed works

1.5 Select, use and maintain personal protective equipment (PPE)

1.6 Organise delivery of materials to site according to workplace priorities

2. Set out and prepare the site

2.1 Erect site bunting, control pedestrian access and place safety signage

2.2 Locate services

2.3 Make provision for irrigation lines to cross paved areas

2.4 Mark out the paving pattern according to plans and specifications

2.5 Place and compact sub-base material to the required finished levels

2.6 Incorporate surface drainage as specified

3. Implement paving project

3.1 Construct paving

3.2 Install appropriate drainage

3.3 Use tools, equipment and machinery safety in accordance with enterprise safe operating procedures and work health and safety requirements

4. Check quality of work and clean-up site

4.1 Inspect the quality of finished works to ensure they have met the required drawings and specifications standards

4.2 Clean work-site and dispose of debris in an environmentally safe and sensitive manner

4.3 Clean, maintain and store tools and equipment

Copy and paste from the following performance criteria to create an observation checklist for each task. When you have finished writing your assessment tool every one of these must have been addressed, preferably several times in a variety of contexts. To ensure this occurs download the assessment matrix for the unit; enter each assessment task as a column header and place check marks against each performance criteria that task addresses.

Observation Checklist

Tasks to be observed according to workplace/college/TAFE policy and procedures, relevant legislation and Codes of Practice Yes No Comments/feedback
Clarify the requirements of the paving project 
Select and use tools, equipment and machinery and check for serviceability 
Identify workplace health and safety hazards, assess risks and implement controls 
Identify and ameliorate environmental impacts of proposed works 
Select, use and maintain personal protective equipment (PPE) 
Organise delivery of materials to site according to workplace priorities 
Erect site bunting, control pedestrian access and place safety signage 
Locate services 
Make provision for irrigation lines to cross paved areas 
Mark out the paving pattern according to plans and specifications 
Place and compact sub-base material to the required finished levels 
Incorporate surface drainage as specified 
Construct paving 
Install appropriate drainage 
Use tools, equipment and machinery safety in accordance with enterprise safe operating procedures and work health and safety requirements 
Inspect the quality of finished works to ensure they have met the required drawings and specifications standards 
Clean work-site and dispose of debris in an environmentally safe and sensitive manner 
Clean, maintain and store tools and equipment 

Forms

Assessment Cover Sheet

AHCLSC306 - Implement a paving project
Assessment task 1: [title]

Student name:

Student ID:

I declare that the assessment tasks submitted for this unit are my own work.

Student signature:

Result: Competent Not yet competent

Feedback to student

 

 

 

 

 

 

 

 

Assessor name:

Signature:

Date:

Assessment Record Sheet

AHCLSC306 - Implement a paving project

Student name:

Student ID:

Assessment task 1: [title] Result: Competent Not yet competent

(add lines for each task)

Feedback to student:

 

 

 

 

 

 

 

 

Overall assessment result: Competent Not yet competent

Assessor name:

Signature:

Date:

Student signature:

Date: